from

$10.49

OIL SENSOR O-RING

from

$65.68

The Original Equipment Engine Coolant Temperature Sensor is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$74.99

Rein Automotive OE quality expansion tank kits, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life

Product Features:

Includes sensor (if applicable) and Cap
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation

from

$31.99

VALVE COVER GASK SET

from

$142.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Manufactured from multiple layers of full hard stainless steel.
Premium FKM rubber coating seals minor surface imperfections.
Precision embossed beads seal combustion and fluids under the most demanding conditions.
Available in multiple thicknesses to maintain valvetrain geometry and compression ratio on machined castings.

from

$60.10

Cylinder Head Bolt Set

from

$36.31

Access Cover Plate

from

$146.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$11.01

The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$133.01

Crank Position Senso

from

$70.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$19.37

Camshaft Follower

from

$28.31

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$468.66

Corteco Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. Corteco Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

Product Features:

OE Quality
Includes woodruff key, bolts, and washers for a complete repair (where applicable)
Direct replacement to ensure proper fit

from

$7.95

Water Outlet Gasket

from

$154.16

Camshaft Solenoid Ad

from

$31.58

Crankshaft Seal

from

$3.14

Valve Keeper

from

$406.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$444.99

This engine variable valve lift eccentric shaft actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine variable valve lift eccentric shaft actuator is made to match the fit and performance of the original actuator on specific vehicle applications
Restores functionality – built to restore the appearance and function of an actuator that has failed due to damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.

Product Features:

Thermostat Hose Flange Repair Kit
Thermostat Hose Flange Repair Kit
The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.
Upgraded replacement – this thermostat hose flange repair kit includes a stronger aluminum flange to prevent future leaks
Convenient kit – comes with flange, O-ring and clamp for complete repair of failed coolant junction

from

$26.14

Timing Guide Rail

from

$9.11

Oil Level Sender O-R

from

$28.26

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$22.71

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$26.29

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features: