from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$52.99

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
All kits are application specific.
Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
Each set comes with special assembly lube to ensure proper torque when tightening.
All kits are boxed and shrink wrapped.

from

$44.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$56.99

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
All kits are application specific.
Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
Each set comes with special assembly lube to ensure proper torque when tightening.
All kits are boxed and shrink wrapped.

from

$5.22

Valve Cover Mount

from

$60.69

Valve Cover Bolt Kit

from

$249.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$195.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$199.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Contains all the parts needed to complete the repair unless otherwise noted

from

$24.04

Rocker Arm

from

$30.79

Rocker Arm

from

$22.71

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$24.55

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$20.52

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability

from

$142.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Manufactured from multiple layers of full hard stainless steel.
Premium FKM rubber coating seals minor surface imperfections.
Precision embossed beads seal combustion and fluids under the most demanding conditions.
Available in multiple thicknesses to maintain valvetrain geometry and compression ratio on machined castings.

from

$95.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.82

Valve Keeper

from

$3.14

Valve Keeper

from

$35.68

Access Cover Plate

from

$444.99

This engine variable valve lift eccentric shaft actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine variable valve lift eccentric shaft actuator is made to match the fit and performance of the original actuator on specific vehicle applications
Restores functionality – built to restore the appearance and function of an actuator that has failed due to damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience