2006 Volkswagen Jetta Vehicle Hoods
More 2006 Volkswagen Jetta Vehicle Hoods
Find your specific 2006 Volkswagen Jetta original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Volkswagen Jetta Vehicle Hoods
StrongArm – Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk (Part No.E6430)
from
$37.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
StrongArm – Trunk Lift Support: 10.98" Ext Length, 3.25" Travel, 134 Lbs of Force, 1 Pk (Part No.E4117)
from
$34.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10408)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS10696)
from
$24.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
International Suspension Group – International Suspension Group Trunk Strut (Part No.O206449657ISG)
from
$20.67
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.
Product Features:
See More
Product Features:
- Exact replacement, engineered for your application.
- Rust-resistant piston rod extends product life.
- Easy lifting, reduced closing effort.
- Consistent lifting force through 50,000 cycles.
Stabilus – Gas Charged Trunk Strut (Part No.O2064233010STB)
from
$35.74
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
Atlas Lift – Lift Support (Part No.LS10008)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Hood Lift Support: 19.69" Ext Length, 7.85" Travel, 84 Lbs of Force, 1 Pk (Part No.D4346)
from
$30.49
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
First Equipment Quality – FEQ Hatch Strut (Part No.O2070406818FEQ)
from
$9.50
The body of FEQ gas springs are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the special grade paint adhere to the body of the gas spring strongly. FEQ Struts provide nitrate treated black rods. Chrome rods are not resistant to environmental factors neither environmental friendly as nitrate treated black ones. Plus, visually black color rod compliments the product better than grey chrome color.)
Product Features:
See More
Product Features:
- The two point spray gun paint system seals extremities and hard to reach places of the body of the gas spring for better protection against deterioration of the paint and corrosion.
- Rods are machined on centerless grinding and polishing machines and also treated with centerless rollers to obtain a smooth surface for the long life cycle that Tuff Support gas springs have.
- Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specs.
- Pressurized lift supports go through Phosphate treating process for paint to adhere properly to body of lift support and give long paint life.
- Rods are heat treated and nitrated for hardening and resistance to corrosion.
- Internal components such as seals, washers and o-rings are procured from suppliers who are TS16949 and ISO9001 certified manufacturers.
KAI – Hood Panel (Part No.VW1230142V)
from
$534.99
New Economy Replacement Hood Panel, Sedan Models, Up To 11/30/2016 Production Date
Product Features:
See More
Product Features:
- Sedan Models, Up To 11/30/2016 Production Date, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Panel (Part No.VW1230131V)
from
$439.99
New Economy Replacement Hood Panel, All Generation 5 Sedans, Only 2009 Wagons
Product Features:
See More
Product Features:
- All Generation 5 Sedans, Only 2009 Wagons, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Original Equipment – Hood Pad (Part No.O20401460781OEA)
from
$107.00
Hood Pad
Dorman – Hood Insulation Retainer Clip (sold by each) (Part No.700-087)
from
$2.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Original Equipment – Hood Pad (Part No.O20401778091OEA)
from
$153.17
Hood Pad
Dorman – Hood Pad Clip (Part No.O2041831899DOR)
from
$4.72
Hood Pad Clip
Dorman – Audi, VW Hood Insulation Retainer (Part No.963-639D)
from
$4.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In (Part No.963-639)
from
$4.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Popular 2006 Volkswagen Jetta Vehicle Hoods Categories
2006 Volkswagen Jetta Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 2006 Volkswagen Jetta. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 9 different Vehicle Hoods in our inventory ranging from $2.79 to $439.99. That means you can find the exact parts or products you need to keep that 2006 Volkswagen Jetta running smoothly.
Vehicle Hoods are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Volkswagen Jetta. Dorman, StrongArm, and Atlas Lift are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 2006 Volkswagen Jetta, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 2006 Volkswagen Jetta rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 2006 Volkswagen Jetta Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Volkswagen Jetta demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Jetta the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
FAQs for 2006 Volkswagen Jetta Vehicle Hoods
What are the most purchased Vehicle Hoods for the 2006 Volkswagen Jetta?
Out of 9 Vehicle Hoods for the 2006 Volkswagen Jetta, the most popular in our inventory are:
from
$37.99
This product is not rated
Trunk Lift Support: 11.72" Ext Length, 2.5" Travel, 160 Lbs of Force, 1 Pk
Lift Supports
from
$4.29
This product is not rated
Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In
Hood Insulation Pads
