2006 UD 2300DH Serpentine and V Belts

Essential 2006 UD 2300DH Serpentine and V Belts

Dayco – Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width (Part No.AP38)

Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width

from

$10.29
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low-drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.

Product Features:
  • Features high grade engineered polymer compounds to help resist heat, oil, and grease.
  • Reliable performance over an extremely wide range of horsepower and RPM applications
  • Manufactured to OEM specifications
See More

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A38)

Hi-Power« II Classical Section Wrapped V-Belt

from

$13.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.

Product Features:
  • Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
  • Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K040445HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$32.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 53.74 Long, 8 Rib Count, Heavy Duty (Part No.5080537)

Poly Rib Belt HD Serpentine Belt; 53.74 Long, 8 Rib Count, Heavy Duty

from

$31.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt Serpentine Belt; 52.95 Long, 7 Rib Count (Part No.5070530)

Poly Rib Belt Serpentine Belt; 52.95 Long, 7 Rib Count

from

$52.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K070529HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$45.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 55.875" Long, 8 Rib Count, Exact Fit (Part No.K080553HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 55.875" Long, 8 Rib Count, Exact Fit

from

$74.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 55.5 Long, 8 Rib Count, Heavy Duty (Part No.5080555)

Poly Rib Belt HD Serpentine Belt; 55.5 Long, 8 Rib Count, Heavy Duty

from

$36.49
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 54.5" Long, 8 Rib Count, Exact Fit (Part No.K080539HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 54.5" Long, 8 Rib Count, Exact Fit

from

$103.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt Serpentine Belt; 44.5 Long, 4 Rib Count (Part No.5040445)

Poly Rib Belt Serpentine Belt; 44.5 Long, 4 Rib Count

from

$21.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

2006 UD 2300DH Serpentine and V Belts

Maybe you’re in the middle of a full rebuild of that 2006 UD 2300DH. Maybe you just need a couple of Serpentine and V Belts. Either way, Advance Auto Parts has 4 different Serpentine and V Belts in our inventory ranging from $10.29 to $74.99. That means you can find the exact parts or products you need to keep that 2006 UD 2300DH running smoothly.

Serpentine and V Belts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2006 UD 2300DH. Dayco and Gates are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Serpentine and V Belts for your 2006 UD 2300DH, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Serpentine and V Belts to keep your 2006 UD 2300DH rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Serpentine and V Belts Brands To Make Your 2006 UD 2300DH Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 UD 2300DH demands trusted brand parts and products to keep it running. Many trusted brands of Serpentine and V Belts make up Advance Auto Parts’ inventory, and all are ready to help make your 2300DH the best it can be. Be sure to browse some of our top Serpentine and V Belts brands and parts.

FAQs for 2006 UD 2300DH Serpentine and V Belts

What are the most purchased Serpentine and V Belts for the 2006 UD 2300DH?

Out of 4 Serpentine and V Belts for the 2006 UD 2300DH, the most popular in our inventory are:
Hi-Power« II Classical Section Wrapped V-Belt
from $13.99
This product is not rated
Hi-Power« II Classical Section Wrapped V-Belt
V-Belts
Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width
from $10.29
This product is not rated
Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width
V-Belts
Poly Rib Belt HD Serpentine Belt; 55.5 Long, 8 Rib Count, Heavy Duty
from $36.49
This product is not rated
Poly Rib Belt HD Serpentine Belt; 55.5 Long, 8 Rib Count, Heavy Duty
Serpentine Belts