from

$49.99

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$132.89

Single or Dual bar design with integrated steel brace virtually eliminates body flex for improved handling and drivability. Solid one piece design for maximum rigidity. Reduces chassis flex and improves torsion stiffness. Improves vehicle handling and drivability characteristics. Mounts directly to strut tower with little or no modifications required. Includes comprehensive instructions and all necessary hardware. Titanium grey powder coating delivers lasting good looks. Available for upper front and or rear.

Product Features:

CS-2 dual bar design
Mounts directly with no modifications required
Includes instructions and all necessary hardware
Titanium-look grey powder coat delivers lasting good looks
Stiffens chassis and improves vehicle handling
Maximum rigidity to increase vehicle handling

from

$33.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$32.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$111.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$74.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$74.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$125.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$31.67

Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:

Made from premium quality cellular polyurethane
The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
KYB Bump Stop Kits suit a variety of vehicle applications
KYB Bump Stop Kits perfectly compliment KYB Struts

from

$28.31

Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:

Made from premium quality cellular polyurethane
The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
KYB Bump Stop Kits suit a variety of vehicle applications
KYB Bump Stop Kits perfectly compliment KYB Struts

from

$20.29

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$36.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$132.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$32.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$23.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$16.79

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$19.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$29.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$274.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$231.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$30.49

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$19.29

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$28.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$90.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Specially bonded design for optimised strength typically required in high load bearing applications.

from

$37.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$33.68

Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features: