from

$70.01

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$58.99

NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$62.73

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$6.29

IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:

Unique friction technology provides efficient and noise-free operation
Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life

from

$6.99

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$79.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$71.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$4.68

Spark Plug Tube Seal

from

$99.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$105.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$41.99

MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$47.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$123.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$87.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$108.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$106.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$18.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
Optimized for OE Applications: Engineered specifically for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
Even Wear: Features a platinum pad on the ground electrode, designed for even wear in distributorless ignition systems.
Fine Wire Tip Design: The fine wire tip design of the IFR5E11 model enhances ignition efficiency and performance.
Fine Wire Tip Design: The fine wire tip design of the IFR7X7G model ensures efficient and consistent spark delivery for optimal engine performance.

from

$7.99

Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly

from

$8.49

Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active™ alloy allows electrodes to reach optimal temperature quickly

from

$5.99

This spark plug features a platinum twin-tip design and a titanium-enhanced ground strap, ensuring superior performance and longevity. The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability. Additionally, the flat seat type ensures a secure and precise fit, making it an ideal choice for enhancing your vehicle’s ignition system.

Product Features:

Platinum Twin-Tip Design: The Denso Platinum TT Spark Plug features a twin-tip design with a high-quality platinum center electrode, ensuring excellent conductivity and enhanced ignition performance.
Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, this spark plug offers superior durability and longevity, making it a reliable choice for your vehicle’s ignition system.
Superior Conductivity: The platinum center electrode tip provides excellent conductivity, ensuring efficient and consistent ignition for improved engine performance.
Enhanced Ignition System: Designed to enhance your vehicle’s ignition system, the Denso Platinum TT Spark Plug delivers superior performance and reliability, making it an ideal choice for automotive enthusiasts.

from

$41.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$40.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$71.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$66.65

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$114.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$83.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$71.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit