2006 Subaru Legacy Exhaust Parts
Find Your Specific 2006 Subaru Legacy Exhaust Parts
Below you will find various in-demand Subaru Exhaust Parts, components and accessories for your 2006 Legacy. Advance Auto Parts has popular Legacy parts like Catalytic Converters, Exhaust Mufflers, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Legacy model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2006 Subaru Legacy Exhaust Parts below and start saving instantly.
Popular 2006 Subaru Legacy Exhaust Parts Categories
Essential Exhaust Parts for 2006 Subaru Legacies
BRExhaust – BRExhaust Exhaust Direct-Fit Muffler Assembly, 229-023 (Part No.229-023)
from
$218.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
See More
Walker – Walker Exhaust Y Pipe, 52368 (Part No.52368)
from
$241.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation. Use Walker accessories when installing catalytic converters and mufflers for a complete system upgrade.
See More
Carquest Premium – Carquest Exhaust Gas Temperature (EGT) Sensor, EGA1378 (Part No.EGA1378)
from
$86.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
See More
Walker – "Walker Direct Fit Exhaust Resonator 2.25"" Outlet (ID) 2.25"" Outlet (OD), 21648" (Part No.21648)
from
$127.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound. Made from 100% aluminized steel, you can depend on Walker resonators to last.
See More
Walker – Walker Direct Fit Exhaust Resonator and Pipe Assembly, 56044 (Part No.56044)
from
$214.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound. Made from 100% aluminized steel, you can depend on Walker resonators to last.
See More
Victor Reinz – Victor Reinz Exhaust Manifold Gasket Set, 11-10691-01 (Part No.11-10691-01)
from
$46.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
See More
Felpro – Felpro Exhaust Manifold Gasket Set, MS 97190 (Part No.MS 97190)
from
$47.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Dorman – Dorman Manifold Converter – CARB Compliant – For Legal Sale In NY – CA – ME, 673-864 (Part No.673-864)
from
$679.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Manifold Catalytic Converter, 52203 (Part No.52203)
from
$1049.00
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 52203. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52203 includes (2) Flange Gaskets and interchanges with OE parts 44620AC22A, 44620AC24A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
Walker – Walker Exhaust Bolt and Spring, 35412 (Part No.35412)
from
$33.49
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life. Use Walker accessories when installing catalytic converters and mufflers for a complete system upgrade.
See More
BRExhaust – BRExhaust Exhaust Hanger Insulator, 255-507 (Part No.255-507)
from
$10.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
See More
Dorman – Help – Dorman – Help Exhaust Manifold Bolt Kit, 03423 (Part No.03423)
from
$10.99
This exhaust bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Dorman – Help – Dorman – Help Exhaust Manifold Hardware Kit, 32112 (Part No.32112)
from
$27.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
See More
MagnaFlow – MagnaFlow Standard Grade Federal / Epa Compliant Universal Catalytic Converter, 94002 (Part No.94002)
from
$145.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94002. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
See More
MagnaFlow – MagnaFlow California Grade Carb Compliant Universal Catalytic Converter, 444504 (Part No.444504)
from
$405.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444504. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
See More
BRExhaust – BRExhaust Direct-Fit Exhaust Muffler Kit, 108-0093 (Part No.108-0093)
from
$311.99
BRExhaust Direct-Fit Muffler Kit 108-0093 offers unparalleled quality and durability to keep your vehicle on the road. Crafted from high-grade aluminized steel, these muffler kits are meticulously engineered to seamlessly replace the factory part while meeting or exceeding original specifications. The direct-fit design ensures a hassle-free bolt-on installation process, and to make your installation experience even smoother, all necessary components including gaskets, clamps, and other essential hardware are included. Featuring precision mandrel-bent pipes, this BRExhaust Direct-Fit Muffler Kit provides optimal exhaust flow to guarantee a complete and precise restoration of your vehicles exhaust system to factory-like performance. BRExhaust Direct-Fit Muffler Kit 108-0093 includes (2) Nuts, (1) 2-Bolt Gasket, (2) Bolts and interchanges with OE parts 44011AE01A, 44300AE11A, 901660014, 902350001. BRExhaust Direct-Fit Muffler Kit 108-0093 features durable aluminized steel and is covered by a 2 year warranty.
See More
BRExhaust – BRExhaust Direct-Fit Exhaust Muffler Kit, 108-0078 (Part No.108-0078)
from
$318.99
BRExhaust Direct-Fit Muffler Kit 108-0078 offers unparalleled quality and durability to keep your vehicle on the road. Crafted from high-grade aluminized steel, these muffler kits are meticulously engineered to seamlessly replace the factory part while meeting or exceeding original specifications. The direct-fit design ensures a hassle-free bolt-on installation process, and to make your installation experience even smoother, all necessary components including gaskets, clamps, and other essential hardware are included. Featuring precision mandrel-bent pipes, this BRExhaust Direct-Fit Muffler Kit provides optimal exhaust flow to guarantee a complete and precise restoration of your vehicles exhaust system to factory-like performance. This Direct-Fit Rear Muffler Kit is designed to fit the 2005-2009 Subaru Legacy 2.5L. BRExhaust Direct-Fit Muffler Kit 108-0078 includes (2) Bolts, (2) Nuts, (1) 2-Bolt Gasket and interchanges with OE parts 44011AE01A, 44380AG11B. BRExhaust Direct-Fit Muffler Kit 108-0078 features durable aluminized steel and is covered by a 2 year warranty.
See More
Walker – Walker Exhaust System Hanger Insulator, 35725 (Part No.35725)
from
$8.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
See More
Walker – Walker Exhaust System Hanger Insulator, 35473 (Part No.35473)
from
$9.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
See More
Walker – Walker Exhaust Pipe Flange Gasket, 31357 (Part No.31357)
from
$19.79
Complete your exhaust repair with Walker gaskets and flanges. Built from quality materials for long lasting durability, they’re available in a range of styles and sizes. Each component is designed to work seamlessly with OE exhaust systems and Walker aftermarket replacement parts.
See More
Walker – Walker Exhaust Pipe Flange Gasket, 31388 (Part No.31388)
from
$5.99
Complete your exhaust repair with Walker gaskets and flanges. Built from quality materials for long lasting durability, they’re available in a range of styles and sizes. Each component is designed to work seamlessly with OE exhaust systems and Walker aftermarket replacement parts.
See More
Victor Reinz – Victor Reinz Exhaust Pipe Flange Gasket, 71-15809-00 (Part No.71-15809-00)
from
$12.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Victor Reinz – Victor Reinz Exhaust Pipe Flange Gasket, 11-10820-01 (Part No.11-10820-01)
from
$21.29
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
See More
Walker – Walker Exhaust Bolt and Spring, 35129 (Part No.35129)
from
$15.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
See More
BRExhaust – BRExhaust Exhaust Bolt, Nut, and Spring Kit, 254-9915 (Part No.254-9915)
from
$21.99
BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.
See More
Walker – Walker Direct Fit Exhaust Resonator and Pipe Assembly, 47839 (Part No.47839)
from
$237.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound. Made from 100% aluminized steel, you can depend on Walker resonators to last.
See More
Walker – Walker Direct Fit Exhaust Resonator and Pipe Assembly, 54062 (Part No.54062)
from
$218.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound. Made from 100% aluminized steel, you can depend on Walker resonators to last.
See More
BRExhaust – BRExhaust Direct-Fit Premium Resonator Assembly, 286-975 (Part No.286-975)
from
$301.99
BRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.
See More
Upgrade your 2006 Subaru Legacy with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2006 Subaru Legacy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Exhaust Parts are key to keeping your Legacy functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Exhaust Parts for the 2006 Subaru Legacy, designed to meet your needs without breaking the bank.
From
Catalytic Converter
replacements to
Exhaust Mufflers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2006 Subaru Legacy at great prices.
Our Exhaust Parts inventory for this model
ranges from just $5.79 to $1,155.00, with
an average price of $305.63.
Our 66 Exhaust Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2006 Subaru Legacy without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Subaru Legacy, we stock popular OEM and aftermarket Exhaust Parts from top names
like Felpro, Walker, Dorman, and more.
Felpro Exhaust Parts
start at just $27.99 and boast an impressive 4.6 stars average rating from customers.
Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $5.79, and at an average 4.2 stars rating.
With 357 customer reviews and counting, our 2006 Subaru Legacy Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Subaru Legacy is always ready to roll. We’re committed to providing you with everything you need to keep your Legacy in top shape, all in one place.
Start shopping confidently below for your 2006 Subaru Legacy!
Best-Selling Catalytic Converters for 2006 Subaru Legacies
Enhance the driving experience in your Subaru with 26 quality Catalytic Converter components, starting at $5.99.
Walker – Walker Ultra EPA Direct Fit Catalytic Converter Overall Length 58.000 IN, 55585 (Part No.55585)
from
$497.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra direct-fit catalytic converters are available for import and domestic OBDII (1996 and newer) vehicles. Count on Walker Ultra converters for industry-leading fit and function.
See More
MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Universal Catalytic Converter, 99304HM (Part No.99304HM)
from
$204.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99304HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
Walker – Walker Exhaust Pipe Flange Gasket, 31388 (Part No.31388)
from
$5.99
Complete your exhaust repair with Walker gaskets and flanges. Built from quality materials for long lasting durability, they’re available in a range of styles and sizes. Each component is designed to work seamlessly with OE exhaust systems and Walker aftermarket replacement parts.
See More
Dorman – Dorman Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME, 674-864 (Part No.674-864)
from
$706.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.
See More
Walker – Walker Ultra EPA Direct Fit Catalytic Converter Overall Length 27.000 IN, 16564 (Part No.16564)
from
$929.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra direct-fit catalytic converters are available for import and domestic OBDII (1996 and newer) vehicles. Count on Walker Ultra converters for industry-leading fit and function.
See More
MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Universal Catalytic Converter, 99176HM (Part No.99176HM)
from
$326.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99176HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
Walker – Walker CalCat CARB Direct Fit Catalytic Converter Overall Length 27.000 IN, 83389 (Part No.83389)
from
$1027.00
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat direct-fit catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Universal Catalytic Converter, 51206 (Part No.51206)
from
$213.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
Walker – "Walker CalCat CARB Universal Catalytic Converter 2.5"" Inlet (ID) 2.5"" Outlet (ID), 84407" (Part No.84407)
from
$382.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Manifold Catalytic Converter, 52305 (Part No.52305)
from
$875.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 52305. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52305 includes (3) Bolts, (3) Flange Gaskets and interchanges with OE parts 44620AA740, 44620AA76A, 44620AA77A, 44620AB24A, 44620AB350, 44620AB43A, 44620AB620, 44620AC07A, 44620AC12A, 44620AC750. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 24416 (Part No.24416)
from
$921.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24416. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 24416 includes (2) Nuts, (2) Bolts, (2) Flange Gaskets and interchanges with OE parts 44102AE200, 44102AG030, 44102AG040, 44612AA120, 44612AA130, 44612AA210, 44612AA280, 44612AA290, 44612AA350, 44612AA360, 44612AA370, 44612AA540. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 51448 (Part No.51448)
from
$413.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51448. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51448 includes (1) Torca Clamp, (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 44620AB25A, 44620AB400, 44620AB44A, 44620AB630, 44620AC760. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
Walker – "Walker CalCat CARB Direct Fit Catalytic Converter 2.365"" Outlet (OD), 83257" (Part No.83257)
from
$515.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat direct-fit catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 49160 (Part No.49160)
from
$1054.00
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49160. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49160 includes (2) Nuts, (2) Bolts, (2) Flange Gaskets and interchanges with OE parts 44102AE200, 44102AG030, 44102AG040, 44612AA120, 44612AA130, 44612AA210, 44612AA280, 44612AA290, 44612AA350, 44612AA360, 44612AA370, 44612AA540, 44612AA590. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Universal Catalytic Converter, 51304 (Part No.51304)
from
$221.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51304. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
Walker – Walker CalCat CARB Direct Fit Catalytic Converter Overall Length 36.375 IN, 84389 (Part No.84389)
from
$1155.00
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat direct-fit catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow California Grade Carb Compliant Direct-Fit Manifold Catalytic Converter, 5531447 (Part No.5531447)
from
$1073.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converter 5531447. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5531447 includes (3) Bolts, (3) Flange Gaskets and interchanges with OE parts 44620AA740, 44620AA76A, 44620AA77A, 44620AB24A, 44620AB350, 44620AB43A, 44620AB620, 44620AC07A, 44620AC12A, 44620AC750. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
See More
Walker – "Walker CalCat CARB Direct Fit Catalytic Converter 2.37"" Outlet (ID), 84476" (Part No.84476)
from
$588.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat direct-fit catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow California Grade Carb Compliant Universal Catalytic Converter, 5571176 (Part No.5571176)
from
$527.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5571176. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 49984 (Part No.49984)
from
$522.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49984. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49984 includes (1) Bolt, (1) Flat Washer, (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 44101FE040, 44101FE090, 44611AA130, 44611AA300. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 23149 (Part No.23149)
from
$497.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23149. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23149 includes (1) Bolt, (1) Flat Washer, (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 44101FE040, 44101FE090, 44104FE080, 44611AA130, 44611AA300, 44614AA030. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
MagnaFlow – MagnaFlow Oem Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 51827 (Part No.51827)
from
$401.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51827. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2005-2008 Subaru Legacy 2.5L & 2005-2007 Subaru Outback 2.5L. MagnaFlow 51827 includes (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 44101AG070, 44101AG080, 44611AA090, 44611AA100, 44611AA200, 44611AA210. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
See More
Walker – "Walker CalCat CARB Universal Catalytic Converter 2.5"" Inlet (ID) 2.5"" Outlet (ID), 83217" (Part No.83217)
from
$391.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat universal catalytic converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles. Walker CalCat catalytic converters are thoroughly tested to ensure they meet CARB performance requirements.
See More
MagnaFlow – MagnaFlow Hm Grade Federal / Epa Compliant Direct-Fit Catalytic Converter, 24827 (Part No.24827)
from
$381.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24827. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2005-2008 Subaru Legacy 2.5L & 2005-2007 Subaru Outback 2.5L. MagnaFlow 24827 includes (1) Donut Gasket, (1) Flange Gasket and interchanges with OE parts 44101AG070, 44101AG080, 44611AA090, 44611AA100, 44611AA200, 44611AA210. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
See More
Most Popular 2006 Subaru Legacy Exhaust Mufflers
Customize your Subaru with 5 Exhaust Mufflers products
like Mufflers, all
priced under $318.99.
Walker – "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21671" (Part No.21671)
from
$179.99
The only broad-market muffler body with 100% stainless-steel construction for longer life, Walker Quiet-Flow SS mufflers deliver precision fit, superior flow and OE-style sound. Available for most domestic and import vehicles, Quiet-Flow SS features an internal drainage system that helps reduce moisture collection.
See More
Walker – "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21672" (Part No.21672)
from
$164.99
The only broad-market muffler body with 100% stainless-steel construction for longer life, Walker Quiet-Flow SS mufflers deliver precision fit, superior flow and OE-style sound. Available for most domestic and import vehicles, Quiet-Flow SS features an internal drainage system that helps reduce moisture collection.
See More
BRExhaust – BRExhaust Exhaust Direct-Fit Muffler Assembly, 229-019 (Part No.229-019)
from
$226.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
See More
BRExhaust – BRExhaust Exhaust Direct-Fit Muffler Assembly, 229-023 (Part No.229-023)
from
$218.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
See More
BRExhaust – BRExhaust Direct-Fit Exhaust Muffler Kit, 108-0079 (Part No.108-0079)
from
$318.99
BRExhaust Direct-Fit Muffler Kit 108-0079 offers unparalleled quality and durability to keep your vehicle on the road. Crafted from high-grade aluminized steel, these muffler kits are meticulously engineered to seamlessly replace the factory part while meeting or exceeding original specifications. The direct-fit design ensures a hassle-free bolt-on installation process, and to make your installation experience even smoother, all necessary components including gaskets, clamps, and other essential hardware are included. Featuring precision mandrel-bent pipes, this BRExhaust Direct-Fit Muffler Kit provides optimal exhaust flow to guarantee a complete and precise restoration of your vehicles exhaust system to factory-like performance. This Direct-Fit Rear Muffler Kit is designed to fit the 2005-2009 Subaru Legacy 2.5L. BRExhaust Direct-Fit Muffler Kit 108-0079 includes (2) Nuts, (1) 2-Bolt Gasket, (2) Bolts and interchanges with OE parts 44011AE01A, 44380AG10B. BRExhaust Direct-Fit Muffler Kit 108-0079 features durable aluminized steel and is covered by a 2 year warranty.
See More
Top Picks for 2006 Subaru Legacy Exhaust Hangers
Upgrade Subaru Legacies with top-quality Exhaust Hangers parts, including 2 OEM and aftermarket selections for your 2006 model.
Walker – Walker Exhaust System Hanger Insulator, 35725 (Part No.35725)
from
$8.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
See More
BRExhaust – BRExhaust Exhaust System Hanger, 255-381 (Part No.255-381)
from
$7.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.
See More
In-Demand Exhaust Pipes for 2006 Subaru Legacies
Select from 24 premium Exhaust Pipes parts for your 2006 Subaru Legacy, with prices ranging from $5.79 to $617.99.
Walker – Walker Exhaust Pipe Flange Gasket, 31613 (Part No.31613)
from
$5.79
Complete your exhaust repair with Walker gaskets and flanges. Built from quality materials for long lasting durability, they’re available in a range of styles and sizes. Each component is designed to work seamlessly with OE exhaust systems and Walker aftermarket replacement parts.
See More
Felpro – Felpro Exhaust Pipe Flange Gasket, 61106 (Part No.61106)
from
$28.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Walker – Walker Exhaust Pipe Flange Gasket, 31639 (Part No.31639)
from
$14.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
See More
Walker – Walker Exhaust Pipe Flange Gasket, 31383 (Part No.31383)
from
$8.99
Complete your exhaust repair with Walker gaskets and flanges. Built from quality materials for long lasting durability, they’re available in a range of styles and sizes. Each component is designed to work seamlessly with OE exhaust systems and Walker aftermarket replacement parts.
See More
Walker – Walker Direct Fit Exhaust Resonator and Pipe Assembly, 47839 (Part No.47839)
from
$237.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound. Made from 100% aluminized steel, you can depend on Walker resonators to last.
See More
Felpro – Felpro Exhaust Pipe Flange Gasket, 61016 (Part No.61016)
from
$27.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-1026 (Part No.256-1026)
from
$16.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
Walker – "Walker Exhaust Pipe Spout 2.25"" Inlet (ID) 3"" Outlet (OD), 36445" (Part No.36445)
from
$28.49
Made from quality material for durability, Walker exhaust spout pipes are available in a variety of styles and sizes for direct-fit or universal application. Use Walker accessories when installing catalytic converters and mufflers for a complete system upgrade.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-789 (Part No.256-789)
from
$6.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Direct-Fit Premium Resonator Assembly, 286-975 (Part No.286-975)
from
$301.99
BRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.
See More
Felpro – Felpro Exhaust Pipe Flange Gasket, 61365 (Part No.61365)
from
$10.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-1046 (Part No.256-1046)
from
$18.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-1001 (Part No.256-1001)
from
$8.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-395 (Part No.256-395)
from
$17.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-390 (Part No.256-390)
from
$8.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-1197 (Part No.256-1197)
from
$21.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
Felpro – Felpro Exhaust Pipe Flange Gasket, 60992 (Part No.60992)
from
$8.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-444 (Part No.256-444)
from
$10.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
BRExhaust – BRExhaust Direct-Fit Exhaust System Kit, 106-0069 (Part No.106-0069)
from
$617.99
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0069 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0069’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2005-2009 Subaru Legacy 2.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0069 includes (1) Donut Gasket, (2) 2-Bolt Gaskets, (1) 1.75in. U-Bolt Clamp, (1) Spring Bolt Kit, (4) Nuts, (1) 2.25in. U-Bolt Clamp, (4) Bolts and interchanges with OE parts 44200AG27A, 44300AG24A, 44300AG25A, 44300AG25B, 44300AG80A, 44300AG91A, 44380AG10B, 44380AG11B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0069 features durable Aluminized Steel construction and is covered by a 2 year warranty.
See More
BRExhaust – BRExhaust Direct-Fit Premium Resonator, 286-437 (Part No.286-437)
from
$408.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.
See More
Victor Reinz – Victor Reinz Exhaust Pipe Flange Gasket, 71-10617-00 (Part No.71-10617-00)
from
$27.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
BRExhaust – BRExhaust Exhaust Pipe Flange Gasket, 256-1063 (Part No.256-1063)
from
$19.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
Victor Reinz – Victor Reinz Exhaust Pipe Flange Gasket, 71-15799-00 (Part No.71-15799-00)
from
$17.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Victor Reinz – Victor Reinz Exhaust Pipe Flange Gasket, 71-15627-00 (Part No.71-15627-00)
from
$12.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Most Sold 2006 Subaru Legacy Exhaust Manifold and Headers
Explore our best-selling Subaru parts for the 2006 Legacy among 4 OEM and aftermarket options starting from $10.99.
Dorman – Help – Dorman – Help Exhaust Manifold Bolt Kit, 03423 (Part No.03423)
from
$10.99
This exhaust bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
See More
Dorman – Help – Dorman – Help Exhaust Flange Hardware, 03114 (Part No.03114)
from
$17.99
This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.
See More
Dorman – Dorman Manifold Converter – CARB Compliant – For Legal Sale In NY – CA – ME, 673-864 (Part No.673-864)
from
$679.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.
See More
Dorman – Help – Dorman – Help Exhaust Manifold Hardware Kit, 32112 (Part No.32112)
from
$27.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
See More
Top-Rated Exhaust Parts Brands For Your 2006 Subaru Legacy
Shop for the best-rated brands offering Exhaust Parts and other products for your 2006 Subaru Legacies. Below you’ll find some of our best rated Exhaust Parts from Felpro, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 2006 Legacy start at just $5.79 and are rated as high as 4.6 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 2006 Subaru Legacy Exhaust Parts
When it comes to maintaining or upgrading your 2006 Subaru Legacy, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Exhaust Parts, specifically designed for the 2006 Subaru Legacy. With over 3 Felpro brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99, with an average price of just $28.99. Plus, with over 35 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$27.99
(5)
Felpro Exhaust Pipe Flange Gasket, 61016
“This is a perfect fit for my 12 nissan versa 4 door sedan.
Some reviews says it isn’t right,but to me it is.. You have to make sure you’re installing ”
from
$28.99
(15)
Felpro Exhaust Pipe Flange Gasket, 61106
“Works to fix rattle between front Y pipe and converter”
Popular Walker 2006 Subaru Legacy Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2006 Subaru Legacy owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2006 Legacy, Advance Auto Parts carries a full inventory of 3 Walker Exhaust Parts. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Walker Exhaust Parts range from $5.79 to $179.99, plus, with more than 9 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$179.99
(1)
"Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21671"
“Little bit louder than stock.”
from
$164.99
(1)
"Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21672"
“Work perfect on my car.”
FAQs for 2006 Subaru Legacy Exhaust Parts
Which Exhaust Parts are best-sellers for 2006 Subaru Legacies?
Out of 66 Exhaust Parts that fit 2006 Subaru Legacies, the following parts are the top sellers:
- Walker Exhaust System Hanger Insulator, 35725 (5602106) – $8.49
- Walker Exhaust Pipe Flange Gasket, 31388 (5383870) – $5.99
- Felpro Exhaust Manifold Gasket Set, MS 95088 (19780857) – $29.99
What’s the price range for 2006 Subaru Legacy Exhaust Parts?
Exhaust Part prices for the 2006 Subaru Legacy start at $5.79 and go up to $1,155.00 for the most premium parts.
What’s the average price of a Exhaust Part for a 2006 Subaru Legacy?
The average price for Exhaust Parts for the 2006 Subaru Legacy is $305.63. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Subaru Legacy model years?
What are the cheapest Exhaust Parts for my 2006 Subaru Legacy?
The cheapest 2006 Subaru Legacy Exhaust Parts we carry in stock are:
- Walker Exhaust Pipe Flange Gasket, 31613 (26010126) – $5.79
- Walker Exhaust Pipe Flange Gasket, 31388 (5383870) – $5.99
- BRExhaust Exhaust Pipe Flange Gasket, 256-789 (20381440) – $6.99
- BRExhaust Exhaust System Hanger, 255-381 (20380942) – $7.99
- Walker Exhaust System Hanger Insulator, 35725 (5602106) – $8.49
What are the top-rated Exhaust Parts that fit the 2006 Subaru Legacy?
Out of 357 reviews by customers, our 2006 Subaru Legacy Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2006 Subaru Legacy and their top-rated products:
- Exhaust Mufflers
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21672" (10959608) – $164.99
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21671" (10959707) – $179.99
- Exhaust Pipes
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21672" (10959608) – $164.99
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21671" (10959707) – $179.99
- Exhaust Gaskets
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21672" (10959608) – $164.99
- "Walker Quiet-Flow SS Direct Fit Exhaust Muffler 2.25"" Outlet (OD), 21671" (10959707) – $179.99
What types of Exhaust Parts do you sell for my 2006 Subaru Legacy?
As of 8/2/26, these are some of the most in-demand types of Exhaust Parts for a 2006 Subaru Legacy:
Can I get help with 2006 Subaru Legacy Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Exhaust Parts and more.
What is your return policy for Subaru Legacy Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Subaru Legacy Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
