2006 Subaru B9 Tribeca Electrical Parts

Essential Electrical Parts for 2006 Subaru B9 Tribecas

Cardone – Power Window Motor: Manual, 1 Pack (Part No.47-4124)

Power Window Motor: Manual, 1 Pack

from

$130.99
CARDONE Remanufactured Window Lift Motors are direct-fit O.E. replacements that began as Original Equipment cores. Each unit is re-engineered, renewed and tested to match O.E. performance. For nearly half a century, CARDONE Remanufactured Window Lift Motors have provided rock-solid reliability that you can trust for the long haul.

Product Features:
  • Each motor is tested 100 percent. Testing includes loading the motor on a simulated window fixture to verify speed and strength of the motor.
  • For motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the ‘full up position’.
  • Every motor has its internal components inspected and gauged. Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation.
  • Internal gears are gauged, inspected and renewed for reuse or replaced if out of spec. Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage.
  • Motor magnets are 100 percent recharged guaranteeing efficiency and reliability.
  • Every remanufactured motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Every remanufactured motor is fully compatible with the O.E. mounting and regulator.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1233)

Multi-Use Connector

from

$29.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1063)

Multi-Use Connector

from

$16.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Tech Smart – Headlight Wiring Harness (Part No.F90012)

Headlight Wiring Harness

from

$19.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 14 gauge wire for better conductivity
  • Complete “plug & play” design plugs between the factory harness and new bulb for ease of installation
  • Can be used as a pigtail if the original connector is melted
  • High-temp connector prevents melting caused by high-intensity H1 and H3 bulbs
  • Fiberglass wrapping prevents chafing
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1326)

Multi-Use Connector

from

$12.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SBA1018)

Engine Oil Pressure Switch

from

$23.99
Carquest Premium Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The oil pressure switch reports engine oil system pressures to the on-board computer or directly to a dash light, and when oil pressure is low, will notify on-board computers and illuminate the low oil pressure warning light. When not replaced, vehicle operator may not be notified of engine oil pressures falling below critical limits. A failing or improperly functioning oil pressure switch will provide erratic or inaccurate readings to on-board computers, affecting performance and system function. In more advanced vehicles, an improperly functioning oil pressure switch may not notify on-board computers of critical system pressure, thus not allowing the computers to place the vehicle into limp mode to protect the engine.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your oil pressure switch.
  • Polyimide film diaphragms offer high temperature performance and enhance life-cycle durability. Oil-resistant O-rings and seals, as well as OE-grade thread-sealant match OE design.
  • From design to manufacturing, the use of proper materials, components and multiple glued seals help prevent oil leaks.
  • All units are 100% tested using advanced end-of-line equipment that pressurize the switch, confirm proper calibration and functionality, and check for leaks to ensure each switch meets manufacturing specifications before packaging.
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SAA4538)

Engine Oil Pressure Switch

from

$6.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest – Engine Oil Pressure Switch (Part No.59A1016)

Engine Oil Pressure Switch

from

$14.79
Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Driveworks – Engine Oil Pressure Switch (Part No.59019)

Engine Oil Pressure Switch

from

$5.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

ACDelco – Engine Oil Pressure Switch (Part No.E1805A)

Engine Oil Pressure Switch

from

$31.99
ACDelco Professional Engine Oil Pressure Switch is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket switch is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Engine Oil Pressure Switch (Part No.S4353)

Engine Oil Pressure Switch

from

$15.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Top-of-the-line quality and performance
  • All units are 100% tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions.
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Engine Oil Pressure Switch (Part No.59A1013)

Engine Oil Pressure Switch

from

$5.99
Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SBC1029)

Engine Oil Pressure Switch

from

$23.99
Carquest Premium oil pressure sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium oil pressure sensors and switches are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium oil pressure sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. They are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered, and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured with high quality materials, industry-leading electronic components and strict quality controls
  • O-rings, seals or thread sealant are included if required
  • Extensive design validation testing and 100% end-of-line tested
See More

Upgrade your 2006 Subaru B9 Tribeca with Top-Quality Electrical Parts

When it comes to maintaining or upgrading your 2006 Subaru B9 Tribeca, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Electrical Parts are key to keeping your B9 Tribeca functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Electrical Parts for the 2006 Subaru B9 Tribeca, designed to meet your needs without breaking the bank. From Electrical Connector replacements to Wire Connectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Electrical Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Electrical Parts for your 2006 Subaru B9 Tribeca at great prices. Our Electrical Parts inventory for this model ranges from just $5.05 to $130.99, with an average price of $25.99. Our 13 Electrical Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 2006 Subaru B9 Tribeca without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Subaru B9 Tribeca, we stock popular OEM and aftermarket Electrical Parts from top names like Carquest, and more. Carquest Electrical Parts start at just $15.05 and boast an impressive 4.4 stars average rating from customers. With 10 customer reviews and counting, our 2006 Subaru B9 Tribeca Electrical Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Electrical Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Subaru B9 Tribeca is always ready to roll. We’re committed to providing you with everything you need to keep your B9 Tribeca in top shape, all in one place. Start shopping confidently below for your 2006 Subaru B9 Tribeca!

Best-Selling Electrical Connectors for 2006 Subaru B9 Tribecas

Enhance the driving experience in your Subaru with 10 quality Electrical Connector components, starting at $5.05.

Carquest – Engine Oil Pressure Switch (Part No.S4353)

Engine Oil Pressure Switch

from

$15.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Top-of-the-line quality and performance
  • All units are 100% tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions.
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SBA1018)

Engine Oil Pressure Switch

from

$23.99
Carquest Premium Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The oil pressure switch reports engine oil system pressures to the on-board computer or directly to a dash light, and when oil pressure is low, will notify on-board computers and illuminate the low oil pressure warning light. When not replaced, vehicle operator may not be notified of engine oil pressures falling below critical limits. A failing or improperly functioning oil pressure switch will provide erratic or inaccurate readings to on-board computers, affecting performance and system function. In more advanced vehicles, an improperly functioning oil pressure switch may not notify on-board computers of critical system pressure, thus not allowing the computers to place the vehicle into limp mode to protect the engine.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your oil pressure switch.
  • Polyimide film diaphragms offer high temperature performance and enhance life-cycle durability. Oil-resistant O-rings and seals, as well as OE-grade thread-sealant match OE design.
  • From design to manufacturing, the use of proper materials, components and multiple glued seals help prevent oil leaks.
  • All units are 100% tested using advanced end-of-line equipment that pressurize the switch, confirm proper calibration and functionality, and check for leaks to ensure each switch meets manufacturing specifications before packaging.
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SAA4538)

Engine Oil Pressure Switch

from

$6.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Engine Oil Pressure Switch (Part No.SBC1029)

Engine Oil Pressure Switch

from

$23.99
Carquest Premium oil pressure sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium oil pressure sensors and switches are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium oil pressure sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. They are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered, and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured with high quality materials, industry-leading electronic components and strict quality controls
  • O-rings, seals or thread sealant are included if required
  • Extensive design validation testing and 100% end-of-line tested
See More

Driveworks – Engine Oil Pressure Switch (Part No.59019)

Engine Oil Pressure Switch

from

$5.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest – Engine Oil Pressure Switch (Part No.59A1016)

Engine Oil Pressure Switch

from

$14.79
Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest – Engine Oil Pressure Switch (Part No.59A1013)

Engine Oil Pressure Switch

from

$5.99
Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1233)

Multi-Use Connector

from

$29.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Engine Oil Pressure Switch (Part No.E1805A)

Engine Oil Pressure Switch

from

$31.99
ACDelco Professional Engine Oil Pressure Switch is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket switch is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1063)

Multi-Use Connector

from

$16.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Most Popular 2006 Subaru B9 Tribeca Wire Connectors

Customize your Subaru with 1 Wire Connectors products like Multi Purpose Wire Connectors, all priced under $12.99.

Carquest Premium – Multi-Use Connector (Part No.PTA1326)

Multi-Use Connector

from

$12.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Top Picks for 2006 Subaru B9 Tribeca Exterior Wiring Harnesses

Upgrade Subaru B9 Tribecas with top-quality Exterior Wiring Harnesses parts, including 1 OEM and aftermarket selections for your 2006 model.

Tech Smart – Headlight Wiring Harness (Part No.F90012)

Headlight Wiring Harness

from

$19.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 14 gauge wire for better conductivity
  • Complete “plug & play” design plugs between the factory harness and new bulb for ease of installation
  • Can be used as a pigtail if the original connector is melted
  • High-temp connector prevents melting caused by high-intensity H1 and H3 bulbs
  • Fiberglass wrapping prevents chafing
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

In-Demand Electrical Motors for 2006 Subaru B9 Tribecas

Select from 1 premium Electrical Motors parts for your 2006 Subaru B9 Tribeca.

Cardone – Power Window Motor: Manual, 1 Pack (Part No.47-4124)

Power Window Motor: Manual, 1 Pack

from

$130.99
CARDONE Remanufactured Window Lift Motors are direct-fit O.E. replacements that began as Original Equipment cores. Each unit is re-engineered, renewed and tested to match O.E. performance. For nearly half a century, CARDONE Remanufactured Window Lift Motors have provided rock-solid reliability that you can trust for the long haul.

Product Features:
  • Each motor is tested 100 percent. Testing includes loading the motor on a simulated window fixture to verify speed and strength of the motor.
  • For motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the ‘full up position’.
  • Every motor has its internal components inspected and gauged. Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation.
  • Internal gears are gauged, inspected and renewed for reuse or replaced if out of spec. Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage.
  • Motor magnets are 100 percent recharged guaranteeing efficiency and reliability.
  • Every remanufactured motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Every remanufactured motor is fully compatible with the O.E. mounting and regulator.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
See More

Top-Rated Electrical Parts Brands For Your 2006 Subaru B9 Tribeca

Shop for the best-rated brands offering Electrical Parts and other products for your 2006 Subaru B9 Tribecas. Below you’ll find some of our best rated Electrical Parts from Carquest, and more. Electrical Parts from these brands that fit a 2006 B9 Tribeca start at just $15.05 and are rated as high as 4.4 stars. OEM and aftermarket Electrical Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 2006 Subaru B9 Tribeca Electrical Parts

When it comes to maintaining or upgrading your 2006 Subaru B9 Tribeca, using quality Electrical Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Electrical Parts, specifically designed for the 2006 Subaru B9 Tribeca. With over 1 Carquest brand Electrical Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.05. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Electrical Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Engine Oil Pressure Switch
from $15.05
(5)
Engine Oil Pressure Switch
“Good price and in stock.”

FAQs for 2006 Subaru B9 Tribeca Electrical Parts

Which Electrical Parts are best-sellers for 2006 Subaru B9 Tribecas?

Out of 13 Electrical Parts that fit 2006 Subaru B9 Tribecas, the following parts are the top sellers:

What’s the price range for 2006 Subaru B9 Tribeca Electrical Parts?

Electrical Part prices for the 2006 Subaru B9 Tribeca start at $5.05 and go up to $130.99 for the most premium parts.

What’s the average price of a Electrical Part for a 2006 Subaru B9 Tribeca?

The average price for Electrical Parts for the 2006 Subaru B9 Tribeca is $25.99. Keep in mind the variety of part types within our Electrical Part category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Electrical Parts for my 2006 Subaru B9 Tribeca?

The cheapest 2006 Subaru B9 Tribeca Electrical Parts we carry in stock are:

What are the top-rated Electrical Parts that fit the 2006 Subaru B9 Tribeca?

Out of 10 reviews by customers, our 2006 Subaru B9 Tribeca Electrical Parts have an average customer rating of . These are some of the highest-rated Electrical Part types for the 2006 Subaru B9 Tribeca and their top-rated products:

What types of Electrical Parts do you sell for my 2006 Subaru B9 Tribeca?

Can I get help with 2006 Subaru B9 Tribeca Electrical Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Electrical Parts and more.

What is your return policy for Subaru B9 Tribeca Electrical Parts?

Advance Auto Parts keeps returns simple. For new Subaru B9 Tribeca Electrical Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.