2006 Pontiac Solstice Fuel Injectors
More 2006 Pontiac Solstice Fuel Injectors
Find your specific 2006 Pontiac Solstice original or aftermarket Fuel Injectors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Pontiac Solstice Fuel Injectors
ACDelco – Multi-Port Fuel Injector Assembly (Part No.217-2907)
from
$99.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Fuel Injector (Part No.67586)
from
$64.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
ACDelco – GM Original Equipment Fuel Injector Assembly (Part No.C1000357648ACD)
from
$115.24
The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1023)
from
$129.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2153)
from
$49.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Mahle – FI Throttle Body Mou (Part No.C7001289503MAH)
from
$22.51
FI Throttle Body Mou
Mahle – Throttle Body Seal (Part No.C7055289542MAH)
from
$13.73
Throttle Body Seal
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61624)
from
$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Fuel Injector Seal (Part No.AS057)
from
$10.49
Product Features:
See More
- Premium OE quality materials
- Includes upper o-ring
- Includes nylon split ring
- Includes combustion seal
MAHLE Original – Injector O-Rings (Part No.GS33482)
from
$38.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with Brackets and Insulators (Part No.217-2257)
from
$48.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a seal to prevent fuel leaks
- Helps seal combustion chamber from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Mass Airflow Sensor with Intake Air Temperature Sensor (Part No.213-4222)
from
$99.99
GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6214)
from
$68.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Spectra Premium – Mass Air Flow Sensor (Part No.MA191)
from
$79.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
- Platinum connector threads reduce the number of connection points for faster reaction to change
- Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
- Ceramic board provides reliable voltage to eliminate engine rough-idle problems
- Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0034)
from
$56.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Delphi – Mass Air Flow Sensor (Part No.AF10142)
from
$127.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
Hitachi – Mass Air Sensor (Part No.B3150396188HIT)
from
$87.08
Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Platinum coated sensing element
- Meets or exceeds OEM specifications
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
Cardone – Mass Air Flow Sensor (Part No.74-50054)
from
$76.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.
Product Features:
See More
Product Features:
- 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
- On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
- All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
- Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
- Components are rated to handle demanding temperature variations for optimum reliability in every environment.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013205500ACD)
from
$50.70
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Popular 2006 Pontiac Solstice Fuel Injectors Categories
2006 Pontiac Solstice Fuel Injectors
Maybe you’re in the middle of a full rebuild of that 2006 Pontiac Solstice. Maybe you just need a couple of Fuel Injectors. Either way, Advance Auto Parts has 19 different Fuel Injectors in our inventory ranging from $5.29 to $127.99. That means you can find the exact parts or products you need to keep that 2006 Pontiac Solstice running smoothly.
Fuel Injectors are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Pontiac Solstice. Felpro, Hitachi, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Fuel Injectors for your 2006 Pontiac Solstice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 134 reviews in this category, some of the top rated parts include Mass Air Flow Sensor with 4.8 stars and Mass Air Flow Sensor with 3.0 stars.
So if you’re in the market for aftermarket Fuel Injectors to keep your 2006 Pontiac Solstice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Fuel Injectors Brands To Make Your 2006 Pontiac Solstice Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Pontiac Solstice demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Injectors make up Advance Auto Parts’ inventory, and all are ready to help make your Solstice the best it can be. Be sure to browse some of our top Fuel Injectors brands and parts.
Popular Carquest Fuel Injectors
We carry Carquest parts in our stock across Fuel Injectors categories, plus more. For a 2006 Pontiac Solstice, our most popular Carquest Fuel Injectors include:
Top 2006 Pontiac Solstice Fuel Injectors from Felpro
Felpro products are another trusted brand when it comes to Fuel Injectors for your 2006 Pontiac Solstice. Popular Felpro parts include:
FAQs for 2006 Pontiac Solstice Fuel Injectors
What are the most purchased Fuel Injectors for the 2006 Pontiac Solstice?
Out of 19 Fuel Injectors for the 2006 Pontiac Solstice, the most popular in our inventory are:
What are the top-rated 2006 Pontiac Solstice Fuel Injectors?
Top-rated Fuel Injectors for your 2006 Pontiac Solstice based on customer reviews/ratings are:
from
$79.99
(6)
Mass Air Flow Sensor
“2007 GMC Envoy with P0171 lean on bank 1 code. Easy fix, been in for a week and code has not come back.”
from
$76.99
(2)
Mass Air Flow Sensor
“[…] easy to install with 2 screws, worked as specified. Pretty much a replacement part. Only in use for 1 week, so I cannot comment on long term rel”
from
$38.99
(1)
Injector O-Rings
“The orings and bushings/collars fit very good but the clips tho hold the injectors into rail do not fit they rattle anround and fall off. Easily fixed”
