from

$357.99

Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r

Product Features:

Impact Resistant Nodular Iron
Corrosion Resistant
Better 4WD Performance
Better Fuel Economy
Easy Install

from

$39.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.

from

$361.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$47.99

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

315 MHz TPMS Universal with metal valve
Programmable – Only take 3 seconds to configure to specific application
Always up-to-date with the new programming function via the TPMS diagnostic tool
Covers multiple applications with one OE equivalent sensor
Reprogrammable and Copy Clone Capable
Have WAL technology for locating tire positon
Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$109.99

Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$32.49

Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$17.39

Our Wheel Nuts are designed and constructed to strict engineering quality standards. All of our Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment.

Product Features:

Wheel nut covers also available
Easy to install
Available in different quantities and packaging options
Chrome wheel nut & lock kits available (where applicable)

from

$3.79

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$14.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Complete TPMS valve stem assembly for OE and REDI-Sensor
0.453″ rim hole compatiblity
200 PSI maximum cold inflation pressure

from

$8.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatiblity
200 PSI maximum cold inflation pressure

from

$23.99

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$4.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Burgundy Kit for Mazda, Mitsubishi, & Nissan

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$462.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$48.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$139.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

from

$39.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$81.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$63.40

Wheel Bearing

from

$29.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

from

$229.99

This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:

Complete repair – this assembly includes the wheel hub and application-specific bearing components
Saves time – eliminates work required to remove individual corroded components
Reliable fit – precision-engineered to match the dimensions of original equipment
Trustworthy quality – engineered and tested in the United States

from

$222.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$138.99

CARQUEST PREMIUM hub assemblies provide the installation benefits of the aftermarket while providing high-quality and proven reliability. CARQUEST PREMIUM hub assemblies are backed by rigorously quality testing throughout the manufacturing process, meeting or exceeding OE specifications. CARQUEST PREMIUM hub assembly parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Obsidian coating for enhancedrust prevention
Enhanced corrosion-resistant on wheel studs to reduce rust (where applicable)
Precision-machined to stringent tolerances provides high-quality and longer endurance
Superior supplier of ABS sensors provides OEM matching signal and our strengthened ABS cord insulation and socket connections add durability and contamination prevention (where applicable)
Bearings and seals are constructed and engineered to meet or exceed the requirements of your vehicle
Roll form bearing design applies exact preload for long lasting durability (where applicable)

from

$42.99

Upgrade the look of your wheel hardware with these racing-inspired lug nuts. Designed with an open end to accommodate long studs, these nuts are finished with a knurled texture for better grip when spinning them by hand. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Purple Open End Knurled Wheel Nuts
Wheel Lug Nut: M12-1.25 Thread, Conical 60, Bulge Open End, 48 mm Length, Purple Chrome, 20 Pack
Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip
Quality materials – made of tough steel for durability and positive tool contact

from

$24.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

from

$3.57

Dorman’s Wheel Nuts are designed and constructed to strict engineering quality standards. All of Dorman’s Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment. Available in multiple styles and finishes, they match the original to blend in with the overall aesthetic design of your car. Chrome upgrade nuts are also available in multiple styles and colors to enhance the look of your wheels.

Product Features:

Wheel nut covers also available
Easy to install
Available in different quantities and packaging options
Chrome wheel nut and lock kits available (where applicable)

2006 Nissan Titan Wheels and Tires

More 2006 Nissan Titan Wheels and Tires Categories

Essential 2006 Nissan Titan Wheels and Tires

Rugged Ridge – Locking Hub (Part No.15001.61)

McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.25 Thread Size) – Set of 4 Locks and 1 Key (Part No.24154)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3040)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A-66)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A-10)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Dorman – Wheel Nut Chrome Cragar Sat Mag M12-1.25, Hex 13/16 Inch Length 2-1/4 Inch (Quantity 4) (Part No.711-402)

Dorman – Wheel Lug Nut: M12-1.25 Thread, Flanged, Cragar SST Mag, 2.245" Length, Chrome, 1 Pack (Part No.611-265.1)

Dill Air Control – TPMS Complete Valve Stem Assembly for OE and REDI-Sensor (Part No.VS-70)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

Dill Air Control – TPMS Service Kit: Burgundy Color Coded Service Kit For Select Models, 25 Piece (Part No.1130K)

Schrader – TPMS Sensor Service Kit (Part No.20018)

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

VDO REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10001HP)

McGard – Chrome Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M12 x 1.25 Thread Size) (Part No.84654)

Dorman – Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-455)

Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, M12-1.25 Thread Size, RHT, 1 Pack (Part No.98364.1)

Dorman – Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread, 40 Pack (Part No.610-378.40)

Autopart International Inc – Wheel Bearing (Part No.K80001944039API)

National – Wheel Seal (Part No.710869)

Dorman – Wheel Bearing and Hub Assembly: Front, 6 Studs (Part No.951-098)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515155)

Carquest Premium – Wheel Bearing and Hub Assembly (Part No.94-611942)

Dorman – Wheel Lug Nut: M12-1.25 Thread, Conical 60, Bulge Open End, 48 mm Length, Purple Chrome, 20 Pack (Part No.713-485J)

McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.25 Thread Size) – Set of 4 Lug Nuts (Part No.64013)

Dorman – Wheel Lug Nut (Part No.O8030782412DOR)

Popular 2006 Nissan Titan Wheels and Tires Categories

2006 Nissan Titan Wheels and Tires

Top-Rated Wheels and Tires Brands For Your 2006 Nissan Titan

Popular MOOG Hub Assemblies Wheels and Tires

Top-Rated Schrader Wheels and Tires

FAQs for 2006 Nissan Titan Wheels and Tires

What are the most purchased Wheels and Tires for the 2006 Nissan Titan?

What are the top-rated 2006 Nissan Titan Wheels and Tires?

More Popular Parts for All Makes