2006 Nissan Maxima Exhaust Parts
More 2006 Nissan Maxima Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2006 Nissan Maxima, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2006 Nissan Maxima Exhaust Parts
Walker – Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31355)
from
$3.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31311)
from
$3.29
Complete your exhaust repair with Walker∩┐╜ gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walkern++ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Nippon Reinz – Catalytic Converter Gasket (Part No.H4001176549NRZ)
from
$11.19
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
BRExhaust – Exhaust Hanger (Part No.255-623)
from
$6.79
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (Part No.03133HP)
from
$26.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
BRExhaust – Exhaust Hanger (Part No.255-381)
from
$6.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- OE-style design for quality fit
- Secure sealing for superior durability
- Manufactured from quality materials to ensure maximum durability
- Reduced vibration
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.444032)
from
$675.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444032. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2003 Nissan Maxima and 2002-2004 INFINITI I35, this direct-fit catalytic converter also interchanges with OE parts 208A2-5Y826 and 208A2-5Y827. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.50809)
from
$540.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50809. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2006 Nissan Maxima, 2004-2009 Nissan Quest, and more, this direct-fit catalytic converter also interchanges with OE parts 208A1-7Y100 and 208A1-8J410, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52128)
from
$817.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52128. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2014 Nissan Maxima, 2007-2018 Nissan Altima, and more, this direct-fit catalytic converter also interchanges with OE parts 208A3-3JP0A and 208A3-9DB0A, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Original Equipment – Exhaust Pipe Stud (Part No.H60071155667OEA)
from
$4.14
Exhaust Pipe Stud
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-058)
from
$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.53711)
from
$179.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Autopart International Inc – Muffler Assembly (Part No.H50011937911API)
from
$362.89
Muffler Assembly
Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942041)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18567)
from
$123.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Ishino Stone – Cat. Converter Gaske (Part No.H4001419196ISH)
from
$12.19
Cat. Converter Gaske
Felpro – Exhaust Pipe Flange Gasket (Part No.61630)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
BRExhaust – Exhaust Flange Gasket (Part No.256-170)
from
$8.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Walker – Ring Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31739)
from
$3.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.452405)
from
$717.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452405. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2000-2001 Nissan Maxima and 2000-2001 INFINITI I30, this direct-fit catalytic converter also interchanges with OE parts 20020-3Y400 and 20020-4L800, among others. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-935)
from
$257.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-934)
from
$335.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-331)
from
$309.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Nippon Reinz – Exhaust Manifold Gasket (Part No.A8111116682NRZ)
from
$16.07
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Ishino – Exhaust Manifold Gasket (Part No.A811145404ISH)
from
$7.68
Exhaust Manifold Gasket
Nippon Reinz – Exhaust Manifold Gasket (Part No.A8111170326NRZ)
from
$18.11
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 91459)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Popular 2006 Nissan Maxima Exhaust Parts Categories
2006 Nissan Maxima Exhaust Parts
You count on your 2006 Nissan Maxima to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 47 Exhaust Parts ranging in price from $1.99 to $2,506.99, you’re sure to find everything you need for your 2006 Nissan Maxima.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Walker, Dorman, and Felpro. 2006 Nissan Maxima Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 165 extensive product reviews on 2006 Nissan Maxima Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter with 4.5 stars and Exhaust Flange Gasket with 1.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2006 Nissan Maxima below to get started!
Top-Rated Exhaust Parts Brands For Your 2006 Nissan Maxima
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Nissan Maxima running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular Walker Exhaust Parts
You’ll find popular Walker brand products across Exhaust Pipes and Catalytic Converters. All are waiting to get your 2006 Nissan Maxima back on the road. Some of the top-rated Walker products in these categories are:
from
$4.79
(9)
Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$455.99
(1)
Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed
Catalytic Converters
from
$2.79
(37)
2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 2006 Nissan Maxima Exhaust Parts
What are the most purchased Exhaust Parts for the 2006 Nissan Maxima?
Out of 47 Exhaust Parts for the 2006 Nissan Maxima, the most popular in our inventory are:
What are the top-rated 2006 Nissan Maxima Exhaust Parts?
Top-rated Exhaust Parts for your 2006 Nissan Maxima based on customer reviews/ratings are:
from
$15.29
(1)
Exhaust Flange Gasket
“Bosal 256-446 is a expensive “special order” exhaust gasket – received and compared to Walker exhaust gasket 31640 appears to be the same in construct”
