2006 Mercury Milan Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 2006 Mercury Milans

Bosch – Pressure Sensor (Part No.0261230093)

Pressure Sensor

from

$122.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:
  • Bosch OE quality pressure sensors for accurate measurements
  • Bosch OE quality pressure sensors for long term stability
  • Bosch OE quality pressure sensors with a short response time
  • Bosch OE quality pressure sensors with improved media resistance
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Motor Connector (Part No.PTA1869)

Exhaust Gas Recirculation (EGR) Valve Motor Connector

from

$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ambient Air Temperature Sensor Connector (Part No.PTA1106)

Ambient Air Temperature Sensor Connector

from

$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013387693MTR)

Fuel Injector O-Ring Kit

from

$10.32
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Motorcraft – Crankcase Breather Hose (Part No.B2010306596MTR)

Crankcase Breather Hose

from

$39.65
Motorcraft Positive Crankcase Ventilation Valve Hoses are designed and tested to meet OE requirements for durability and reliability under extreme conditions. These hoses are built to maximize the performance are made from high-quality materials ensuring lasting durability. They offer high resistance which enhances the hose life.

Product Features:
  • Ensures long lasting durability
  • Highly reliable
  • Made of high quality material
  • Resists abrasion and corrosion
  • Enhances hose life
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPC1011)

Fuel Injection Pressure Sensor

from

$89.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Bosch – Fuel Pressure Sensor (Part No.C3001212139BOS)

Fuel Pressure Sensor

from

$76.99
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:
  • Built-in circuit protection to ensure your electronics and computer systems stay unharmed
  • High reliability of pressure sensing proved in gasoline and diesel direct injection systems
  • Sturdy design, vibration resistant and thermal stability
See More

Motorcraft – Fuel Injector (Part No.C1000671877MTR)

Fuel Injector

from

$63.09
Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:
  • Same fuel Injectors installed during vehicle production
  • Latest engineering enhancements are incorporated
  • Hot fuel handling capabilities translate into consistent performance
  • Before they are shipped, fuel Injectors are 100-percent flow-tested
  • Units come as complete assemblies for easier, faster installation
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1141)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$317.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Dorman – SPRINGLOCK FUEL LINE CONNECTOR- 11mm x 5/16In. BARBED MALE (Part No.800-130)

SPRINGLOCK FUEL LINE CONNECTOR- 11mm x 5/16In. BARBED MALE

from

$13.49
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:
  • Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
  • Quality construction – manufactured from premium materials for a long service life.
  • Saves money – replace only the part, not the entire assembly
  • Excellent value – original equipment quality at a lower price
See More

Driveworks – Electrical Relay (Part No.83265)

Electrical Relay

from

$15.79
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Autotecnica – Air Pump (Part No.B6010190718ANA)

Air Pump

from

$214.60
Air Pump

Dorman – Fuel Tank With Lock Ring And Seal (Part No.576-973)

Fuel Tank With Lock Ring And Seal

from

$353.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:
  • Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models.
  • Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service.
  • Quality assured – this part has been validated to ensure a quality fit and long service life
  • Trustworthy design – backed by team of product specialists in the United States
See More

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-281)

Evaporative Emissions Purge Solenoid Valve

from

$85.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:
  • Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Dorman – Fuel Tank O-Ring (Part No.911-245)

Fuel Tank O-Ring

from

$39.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service.
  • Durable construction – recommended for replacement when the fuel pump or sensor is replaced
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61158)

Fuel Injection Throttle Body Mounting Gasket

from

$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Walker Products – Air Charge Temperature Sensor (Part No.C6000408661WKR)

Air Charge Temperature Sensor

from

$30.62
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor Connector (Part No.PTA1524)

Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor Connector

from

$37.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA3077)

Oxygen Sensor Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Oxygen Sensor (Part No.C50101164561BOS)

Oxygen Sensor

from

$165.11
Oxygen Sensor

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Air Injection Reaction Check Valve (Part No.B60502159986DOR)

Air Injection Reaction Check Valve

from

$266.39
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants before they reach the atmosphere. Dorman’s A.I.R Check Valve is constructed to withstand the extreme heat of the exhaust manifold and function properly every time.

Product Features:
  • Include gaskets and mounting hardware for a complete repair
  • Direct replacement for a proper fit every time
  • Durable metal construction helps to withstand extreme temperatures
  • Quality-tested to ensure trouble-free installation and durability
See More

Dorman – Lock Ring For The Fuel Pump (Part No.579-207)

Lock Ring For The Fuel Pump

from

$21.99
A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service..

Product Features:
  • Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part.
  • Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1035)

Exhaust Gas Recirculation (EGR) Valve

from

$77.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – EGR Tube Connector (Part No.917-416)

EGR Tube Connector

from

$32.99
This EGR tube connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this EGR tube connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Secondary A.I.R. Injection Valve (Part No.911-167)

Secondary A.I.R. Injection Valve

from

$235.99
This secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles.
  • Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 2006 Mercury Milan with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Mercury Milan, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Milan functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Fuel and Emissions Systems for the 2006 Mercury Milan, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2006 Mercury Milan at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.49 to $648.99, with an average price of $88.28. Our 98 Fuel and Emissions Systems in stock come from 21 trusted brands, so you’re sure to find the right part for your 2006 Mercury Milan without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Mercury Milan, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Bosch, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $2.49 and boast an impressive 5 stars average rating from customers. Bosch and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $8.29, and at an average 5 stars rating. With 1,728 customer reviews and counting, our 2006 Mercury Milan Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Mercury Milan is always ready to roll. We’re committed to providing you with everything you need to keep your Milan in top shape, all in one place. Start shopping confidently below for your 2006 Mercury Milan!

Best-Selling Fuel Pumps for 2006 Mercury Milans

Enhance the driving experience in your Mercury with 7 quality Fuel Pump components, starting at $39.99.

Carquest Premium – Fuel Pump E2521127 (Part No.E2521127)

Fuel Pump E2521127

from

$61.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1143)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$253.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Carquest Premium – Fuel Pump Module Assembly M2496136: Fuel Pump, Sending Unit and Strainer (Part No.M2496136)

Fuel Pump Module Assembly M2496136: Fuel Pump, Sending Unit and Strainer

from

$147.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1138)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$251.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Motorcraft – Fuel Pump Assembly (Part No.E3001357966MTR)

Fuel Pump Assembly

from

$434.63
Motorcraft electric fuel pumps are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:
  • Same fuel pumps installed during vehicle production
  • Latest engineering enhancements are incorporated
  • Hot fuel handling capabilities translate into consistent performance
  • Optimal check-valve design and outlet fitting configurations are utilized to meet specific vehicle applications
  • Accurate fuel gauge readings are the result of vehicle-specific designs
  • Before they are shipped, fuel pumps are 100-percent flow-tested
  • Units come as complete assemblies for easier, faster installation
See More

Delphi – Series 7000 Fuel Module (Part No.E3001357966DEL)

Series 7000 Fuel Module

from

$390.38
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Most Popular 2006 Mercury Milan Oxygen Sensors

Customize your Mercury with 17 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $89.10.

DENSO – Oxygen Sensor: Upstream, 4 Wire, 15.39" Long, Heated, Exact Fit (Part No.234-4374)

Oxygen Sensor: Upstream, 4 Wire, 15.39" Long, Heated, Exact Fit

from

$61.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)

Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit

from

$59.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)

Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit

from

$59.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.15716)

Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit

from

$49.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No.15718)

Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit

from

$49.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

NTK – Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No.22012)

Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit

from

$59.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)

Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal

from

$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Motorcraft – Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency (Part No.C5010948703MTR)

Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency

from

$89.10
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:
  • Same components used in the factory
  • Units come ready to plug and play, with no need for modifications
  • OE connectors and wire lengths
  • Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
  • Designed to help provide optimal performance and fuel economy
  • OE enhancements are included in the most current designs
  • Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
See More

DENSO – Oxygen Sensor: 4 Wire, 18.11" Long, Heated, Exact Fit (Part No.234-4609)

Oxygen Sensor: 4 Wire, 18.11" Long, Heated, Exact Fit

from

$50.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Walker – Walker Oxygen Sensor (Part No.C5010380927WKR)

Walker Oxygen Sensor

from

$84.57
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:
  • Improved Engine Response and Performance
  • Lower Emissions
  • Improved Fuel Economy
  • Longer Sensor Life
  • Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
See More

DENSO – Oxygen Sensor: 4 Wire, 13.15" Long, Heated, Exact Fit (Part No.234-4610)

Oxygen Sensor: 4 Wire, 13.15" Long, Heated, Exact Fit

from

$58.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Bosch Oxygen Sensor (Part No.C501091453BOS)

Bosch Oxygen Sensor

from

$53.00
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

DENSO – Universal Oxygen Sensor (Part No.C5010121226ND)

Universal Oxygen Sensor

from

$79.49
Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

DENSO – Oxygen Sensor (Part No.C5010690111ND)

Oxygen Sensor

from

$72.92
Oxygen Sensor

DENSO – First Time Fit Oxygen Sensor (Part No.C5010112405ND)

First Time Fit Oxygen Sensor

from

$60.08
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA3077)

Oxygen Sensor Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2006 Mercury Milan Air Flow Sensors

Upgrade Mercury Milans with top-quality Air Flow Sensors parts, including 11 OEM and aftermarket selections for your 2006 model.

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Fuel Pressure Sensor (Part No.C3001212139BOS)

Fuel Pressure Sensor

from

$76.99
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:
  • Built-in circuit protection to ensure your electronics and computer systems stay unharmed
  • High reliability of pressure sensing proved in gasoline and diesel direct injection systems
  • Sturdy design, vibration resistant and thermal stability
See More

Carquest Premium – Ambient Air Temperature Sensor Connector (Part No.PTA1106)

Ambient Air Temperature Sensor Connector

from

$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1074)

Manifold Absolute Pressure Sensor (MAP)

from

$86.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Bosch – Oxygen Sensor (Part No.C501041270BOS)

Oxygen Sensor

from

$69.77
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1367)

Manifold Absolute Pressure Sensor (MAP)

from

$82.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1615)

ABS Wheel Speed Sensor Connector

from

$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DY-1137)

Original Equipment (O.E.) Sensor Assembly

from

$62.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Motorcraft – Motorcraft MAP Sensor (Part No.C7044672014MTR)

Motorcraft MAP Sensor

from

$118.44
Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:
  • New and remanufactured available to help meet your customers’ needs
  • Units come ready to plug and play, with no need for modifications
  • Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
  • Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
  • Design includes OE innovations and upgrades
See More

Motorcraft – Air Charged Temperature Sensor (Part No.C6000408661MTR)

Air Charged Temperature Sensor

from

$69.90
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1529)

Ambient Air Temperature Sensor

from

$56.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Application matched components ensures system operation in like new condition.
See More

In-Demand Fuel Injectors for 2006 Mercury Milans

Select from 24 premium Fuel Injectors parts for your 2006 Mercury Milan, with prices ranging from $2.49 to $176.02.

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 96252)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61158)

Fuel Injection Throttle Body Mounting Gasket

from

$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Mass Air Flow Sensor

from

$89.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • Platinum connector threads reduce the number of connection points for faster reaction to change
  • Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
  • Ceramic board provides reliable voltage to eliminate engine rough-idle problems
  • Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Felpro – Fuel Injection Idle Air Control Valve Gasket (Part No.72302)

Fuel Injection Idle Air Control Valve Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61413)

Fuel Injection Throttle Body Mounting Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)

Air Flow Sensor - New Actual OE Part

from

$91.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:
  • Hitachi is a Tier 1 OE supplier for air flow sensors
  • 100% NEW, never remanufactured
  • Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
  • Precision manufactured and assembled sensing elements for accurate air flow measurements
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Fuel Injector Seal Kit

from

$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1922)

Remanufactured Fuel Injector

from

$51.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Motorcraft – Fuel Injector (Part No.C1000671877MTR)

Fuel Injector

from

$63.09
Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:
  • Same fuel Injectors installed during vehicle production
  • Latest engineering enhancements are incorporated
  • Hot fuel handling capabilities translate into consistent performance
  • Before they are shipped, fuel Injectors are 100-percent flow-tested
  • Units come as complete assemblies for easier, faster installation
See More

Dorman – OE Solutions Intake Manifold Runner Control Valve (Part No.B1220703207DOR)

OE Solutions Intake Manifold Runner Control Valve

from

$176.02
Save time, money and labor with Dorman’s Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.

Product Features:
  • Replacement returns vehicle to proper operation
  • Direct replacement for a proper fit every time
  • Durable construction for a long service life
  • Easy to install
See More

Worldpac – INTAKE MAN. RUNNER V (Part No.B12204199689ANA)

INTAKE MAN. RUNNER V

from

$165.37
INTAKE MAN. RUNNER V

Delphi – Mass Air Flow Sensor (Part No.AF10140)

Mass Air Flow Sensor

from

$159.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Hitachi – Mass Air Sensor (Part No.B3150396162HIT)

Mass Air Sensor

from

$144.36
Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Platinum coated sensing element
  • Meets or exceeds OEM specifications
  • Utilizes the factory style mounts, connectors and fittings
  • Provides exceptional reliability
See More

Motorcraft – Fuel Injector (Part No.C1000357661MTR)

Fuel Injector

from

$77.54
Fuel Injector

Bosch – Fuel Injector: New (Part No.62401)

Fuel Injector: New

from

$72.99
Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:
  • Guaranteed OE fit, form and function
  • Manufactured of the highest quality materials
  • Provides precision flow and original spray pattern for optimal performance
  • Product includes top and bottom mounting o-ring
  • Maintains new-car smoothness and drivability
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2132)

Remanufactured Fuel Injector

from

$54.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Motorcraft – Motorcraft Idle Control Valve Gasket (Part No.C4063432901MTR)

Motorcraft Idle Control Valve Gasket

from

$34.94
With today’s complex automotive engines, it’s even more critical to have the right sealing components for accurate pressure relief and gasket sealing.

Product Features:
  • Wide range available in precut sizes
  • Available plain or backed with adhesive
  • Bulk gasket material available for custom cutting by hand
See More

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)

Fuel Injector O-Ring Kit

from

$28.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:
  • Why Buy:
  • The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
See More

Mahle – Mahle, Fuel Injector O-Ring Kit, Pack of 12 (Part No.C1013387693MAH)

Mahle, Fuel Injector O-Ring Kit, Pack of 12

from

$14.95
Mahle, Fuel Injector O-Ring Kit, Pack of 12

Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013387693MTR)

Fuel Injector O-Ring Kit

from

$10.32
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Fuel Injector O-Ring Kit

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Mahle – FI Throttle Body Mou (Part No.C7001299866MAH)

FI Throttle Body Mou

from

$4.42
FI Throttle Body Mou

Most Sold 2006 Mercury Milan Gas Caps

Explore our best-selling Mercury parts for the 2006 Milan among 5 OEM and aftermarket options starting from $21.99.

Carquest Premium – Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840)

Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10510)

Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$32.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC839T)

Tethered Fuel Cap

from

$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Gates – Fuel Tank Cap (Part No.E2010668563GAT)

Fuel Tank Cap

from

$26.05
Fuel Tank Cap

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010672210MTR)

Motorcraft Fuel Tank Cap

from

$34.86
With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:
  • Motorcraft provides extensive coverage of these caps
  • Available for most Ford and Lincoln vehicles
  • Locking sets are offered for dual-tank applications that contain two matching caps with four keys
  • Both locking- and non-locking styles are available
See More

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Mercury Milan

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2006 Mercury Milans. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Bosch, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2006 Milan start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2006 Mercury Milan Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Mercury Milan, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2006 Mercury Milan. With over 8 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $6.68. Plus, with over 186 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

EGR/EXHAUST AIR SUPPLY GASKET
from
$4.49

(39)

EGR/EXHAUST AIR SUPPLY GASKET

“Great product”

Fuel Injection Throttle Body Mounting Gasket
from
$3.99

(4)

Fuel Injection Throttle Body Mounting Gasket

“Great seal and fitment”

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET
from
$21.49

(29)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

“They worked out great no fitment issues and replaced the old flattened ones”

Popular Bosch 2006 Mercury Milan Fuel and Emissions Systems

Bosch auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2006 Mercury Milan owner should feel confident when installing genuine Bosch parts in their vehicle. To ensure the best fit and performance for your 2006 Milan, Advance Auto Parts carries a full inventory of 9 Bosch Fuel and Emissions Systems. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Bosch Fuel and Emissions Systems range from $49.99 to $122.99, plus, with more than 260 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Oxygen Sensor
from
$69.77
This product is not rated

Oxygen Sensor

“”

Fuel Pressure Sensor
from
$76.99
This product is not rated

Fuel Pressure Sensor

“”

Bosch Oxygen Sensor
from
$53
This product is not rated

Bosch Oxygen Sensor

“”

FAQs for 2006 Mercury Milan Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2006 Mercury Milans?

Out of 98 Fuel and Emissions Systems that fit 2006 Mercury Milans, the following parts are the top sellers:

What’s the price range for 2006 Mercury Milan Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2006 Mercury Milan start at $2.49 and go up to $648.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2006 Mercury Milan?

The average price for Fuel and Emissions Systems for the 2006 Mercury Milan is $88.28. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Mercury Milan model years?

Yes, we currently carry Fuel and Emissions Systems for 5 model years of Mercury Milans between 2007 and 2011. Fuel and Emissions Systems are bought most frequently for the following model years: 2011, 2010, 2009, 2008, and 2007.

What are the cheapest Fuel and Emissions Systems for my 2006 Mercury Milan?

The cheapest 2006 Mercury Milan Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 2006 Mercury Milan?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2006 Mercury Milan:

Can I get help with 2006 Mercury Milan Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Fuel and Emissions Systems and more.

What is your return policy for Mercury Milan Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Mercury Milan Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.