2006 Lexus IS250 Fuel and Emissions Systems

Essential 2006 Lexus IS250 Fuel and Emissions Systems

DENSO – Mass Air Flow Sensor (Part No.197-6160)

Mass Air Flow Sensor

from

$169.99
DENSO’s innoviate designs reduces the size and weight which allows for easy installation. Glass film coated sensing elements reduces contamination exposure and improves reliability.

Product Features:
  • OE technology adapted for the aftermarket
  • Reduces emissions, increased performance
  • Delivers the highest reliability and detection accuracyá
See More

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015690062ND)

First Time Fit Air Fuel Ratio Sensor

from

$288.17
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:
  • Tarnish-proof platinum electrodes provides longer life and maintains accuracy
  • Quick-response planar zirconia element can quickly detect oxygen concentration
  • Measures A/F ratios from approximately 12:1 to 19:1
  • Increased performance by mapping a/f ratios throughout rpm range
  • Reduces emissions by keeping the air-fuel mixture at an optimum ratio
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61583)

Fuel Injection Throttle Body Mounting Gasket

from

$10.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1038)

Fuel Injection Pressure Sensor

from

$375.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Keyed Alike Locking Fuel Cap

from

$6.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 8.35" Long, Heated, Exact Fit (Part No.234-9144)

Wideband Oxygen Sensor: Upstream, 4 Wire, 8.35" Long, Heated, Exact Fit

from

$248.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit the first t

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 10.83" Long, Heated, Exact Fit (Part No.234-9048)

Wideband Oxygen Sensor: Upstream, 4 Wire, 10.83" Long, Heated, Exact Fit

from

$212.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1121)

Ambient Air Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10014)

Direct Injection High Pressure Fuel Pump: With Gasket

from

$3629.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
  • Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
  • Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
  • Meets OE specifications
See More

Carquest Premium – Vapor Canister (Part No.CPN1806)

Vapor Canister

from

$1018.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1489)

Fuel Injection Pressure Regulator

from

$131.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10666)

Fuel Injection Pressure Regulator

from

$336.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Delphi – Series 7000 Fuel Module (Part No.E3001537820DEL)

Series 7000 Fuel Module

from

$349.37
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Delphi – Electric Fuel Pump: With Spacers (Part No.FE0544)

Electric Fuel Pump: With Spacers

from

$767.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Bolts/Washers, Clips (Part No.FG1174)

Fuel Pump Module Assembly: With Float Arm, Seal, Bolts/Washers, Clips

from

$321.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Carquest Premium – Fuel Injector Seal (Part No.AS058)

Fuel Injector Seal

from

$15.99
Product Features:
  • Premium OE quality materials
  • Includes upper o-ring
  • Includes two plastic washers
  • Includes two combustion seals
  • Includes body ring
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A512-1024)

Remanufactured Fuel Injector

from

$296.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new o-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A512-1014)

Remanufactured Fuel Injector

from

$187.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new o-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

2006 Lexus IS250 Fuel and Emissions Systems

You count on your 2006 Lexus IS250 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 43 Fuel and Emissions Systems ranging in price from $6.99 to $3,629.99, you’re sure to find everything you need for your 2006 Lexus IS250.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 9 different brands like Carquest Premium, Bosch, and Motorad. 2006 Lexus IS250 Fuel and Emissions Systems start as low as $6.99!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 566 extensive product reviews on 2006 Lexus IS250 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2006 Lexus IS250 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Lexus IS250

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Lexus IS250 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Bosch, Motorad, and even more.

Popular Cardone Fuel and Emissions Systems

You’ll find popular Cardone brand products across Fuel Injectors. All are waiting to get your 2006 Lexus IS250 back on the road. Some of the top-rated Cardone products in these categories are:
Mass Air Flow Sensor
from $122.99
(2)
Mass Air Flow Sensor
Air Flow Meters and Mass Air

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 2006 Lexus IS250, and some of our most reviewed Carquest Premium parts include:

FAQs for 2006 Lexus IS250 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2006 Lexus IS250?

Out of 43 Fuel and Emissions Systems for the 2006 Lexus IS250, the most popular in our inventory are:

What are the top-rated 2006 Lexus IS250 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2006 Lexus IS250 based on customer reviews/ratings are:
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”