2006 Land Rover LR3 Brake Parts

Below you will find various in-demand Land Rover Brake Parts, components and accessories for your 2006 LR3. Advance Auto Parts has popular LR3 parts like Brake Pads and Shoes, Brake Hoses, Brake Rotors and Drums and more. You’ll also find aftermarket and OEM Brake Parts for other LR3 model years including 2005, 2007, 2008, 2009 and more. Select a category of 2006 Land Rover LR3 Brake Parts below and start saving instantly.

Popular 2006 Land Rover LR3 Brake Parts Categories

Front Brake Rotors

Rear Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Rear Brake Calipers

Front Brake Calipers

Disc Brake Pad and Rotor Kits

Disc Brake Kits

Power Brake Boosters

Brake Caliper Bolt and Pins

Brake Caliper Guide Pin Boot Kits

Brake Wear Sensors

Brake Hoses

Brake Hardware Kits

Brake Caliper Brackets

ABS Harness Connectors

Brake Caliper Kits

Essential Brake Parts for 2006 Land Rover LR3s

from

$144.99

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time.

from

$193.99

Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.

Product Features:

100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
New mounting nuts and washers ensure proper, hassle-free installation.
All units are 100 percent tested to ensure reliable performance.
Guaranteed fit and function.
Meets or exceeds O.E. performance.

from

$6.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Maintains proper movement for safe, effective stopping performance
Prevents noise and premature wear

from

$69.99

Carquest Premium Caliper Brackets meet or exceed OE specifications for performance and durability. They are finished with OE-style zinc-dichromate for superior rust protection. Every unit is 100% tested for fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Finished with OE-style zinc-dichromate for superior rust protection
Every unit is 100% tested for fit

from

$74.99

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement

from

$111.99

Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Engineered to withstand 120 hours of salt spray testing
Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$77.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100% tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$77.99

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$73.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$52.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$33.99

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$37.99

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$683.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.

Product Features:

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Rotors are zinc plated for maximum protection against rust.
Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
Includes 1 Front & 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$303.99

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Rotors are zinc plated for maximum protection against rust.
Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
Includes 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$23.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$18.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$9.49

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$3.99

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$42.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$38.99

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$83.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$83.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$263.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Includes 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$17.79

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. Brake clips are designed to push the pads away from the rotors when they aren’t being activated to prevent overheating and noise.

Product Features:

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied with the car
Low-friction PTFE coating to reduce drag
Maintains safe movement and effective stopping performance
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system
Stainless Steel Dual Coated

from

$18.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
External core made from oriented silicon steel ensures durability and longevity

Upgrade your 2006 Land Rover LR3 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 2006 Land Rover LR3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Land Rover or enhancing its overall performance, Brake Parts are key to keeping your LR3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Brake Parts for the 2006 Land Rover LR3, designed to meet your needs without breaking the bank. From Brake Pads and Shoe replacements to Brake Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 2006 Land Rover LR3 at great prices. Our Brake Parts inventory for this model ranges from just $3.99 to $683.99, with an average price of $105.91. Our 45 Brake Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2006 Land Rover LR3 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Land Rover LR3, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Professional, Carquest, Carquest Premium, and more. Carquest Professional Brake Parts start at just $73.99 and boast an impressive 4.5 stars average rating from customers. Carquest and Carquest Premium also bring quality to the table, with Brake Parts available starting at $6.99, and at an average 4.4 stars rating. With 276 customer reviews and counting, our 2006 Land Rover LR3 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Land Rover LR3 is always ready to roll. We’re committed to providing you with everything you need to keep your LR3 in top shape, all in one place. Start shopping confidently below for your 2006 Land Rover LR3!

Best-Selling Brake Pads and Shoes for 2006 Land Rover LR3s

Enhance the driving experience in your Land Rover with 11 quality Brake Pads and Shoe components, starting at $33.99.

show more show less

from

$73.99

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance. Carquest Brakes also offers technical support at 1-833-BRAKE HQ (833-272-5347) for help with product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$33.99

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$74.99

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement

from

$73.99

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$73.99

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement

from

$37.99

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$52.99

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$41.99

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$73.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$73.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$68.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

Top Picks for 2006 Land Rover LR3 Brake Rotors and Drums

Upgrade Land Rover LR3s with top-quality Brake Rotors and Drums parts, including 8 OEM and aftermarket selections for your 2006 model.

show more show less

from

$144.99

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time.

from

$111.99

Engineered to withstand 120 hours of salt spray testing
Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$121.99

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

Engineered to withstand 120 hours of salt spray testing
Features RotorShield+ coating to maintain a like-new appearance
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise

from

$159.99

Brembo’s UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo’s NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.

Product Features:

UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
Supplied with necessary fixing hardware
Total control over the entire process

from

$139.99

Brembo’s UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo¿s NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.

Product Features:

UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
Supplied with necessary fixing hardware
Total control over the entire process

from

$130.99

UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
Supplied with necessary fixing hardware
Total control over the entire process

from

$130.99

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to prevent warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$123.99

Carquest Professional coated rotors with high carbon content are built to meet or exceed original equipment specifications delivering superior stopping power. Rotors built with a high carbon content provide superior resistance to pedal pulsation and noise. The high carbon content helps these Carquest Professional rotors dissipate heat faster for better performance and longer-lasting brakes. Carquest Professional coated rotors also feature a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor.

Product Features:

High carbon content dissipates heat faster for better performance and longer-life
Superior resistance to pedal pulsation and noise
Engineered to withstand 120 hours of salt spray testing
Features RotorShield+ coating to maintain a like-new appearance
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Dampened iron helps to reduce brake noise

In-Demand Brake Calipers for 2006 Land Rover LR3s

Select from 7 premium Brake Calipers parts for your 2006 Land Rover LR3, with prices ranging from $18.99 to $83.99.

show more show less

from

$18.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$83.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$23.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$83.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$77.99

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$77.99

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$69.99

Meets or exceeds original equipment specifications for performance and durability
Finished with OE-style zinc-dichromate for superior rust protection
Every unit is 100% tested for fit

Most Sold 2006 Land Rover LR3 Brake Kits

Explore our best-selling Land Rover parts for the 2006 LR3 among 13 OEM and aftermarket options starting from $3.99.

show more show less

from

$6.99

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Maintains proper movement for safe, effective stopping performance
Prevents noise and premature wear

from

$9.49

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$3.99

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$683.99

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Rotors are zinc plated for maximum protection against rust.
Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
Includes 1 Front & 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$263.99

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Includes 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$593.99

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Includes 1 Front & 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$468.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. We are proud to offer our Euro-Stop Brake Kit, an affordable solution for owners of high-end European vehicles who prefer original equipment brakes. This brake pad and rotor kit is manufactured to original equipment specifications and comes with everything you need, including electronic wear sensors and stainless-steel hardware, for an easy, bolt-on installation. The pads meet the strict ECE-R90 standards required throughout the European Union ensuring OE performance and quality, and the High-Carbon rotors are treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without diminishing braking performance. If you are looking to retain the original level of performance for your European vehicle but tired of the big price, Euro-Stop is for you.

Product Features:

This complete brake kit has been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
Rotors coated for optimum anti-corrosion protection
High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
Pads manufactured in Europe for European applications
ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Includes 2 front and 2 rear electronic pad wear sensors
Buy with confidence from the originator & industry leader of brake kits

from

$379.99

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Rotors are zinc plated for maximum protection against rust.
Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
Includes 1 Front Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$330.99

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Includes 1 Front Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$303.99

This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Rotors are zinc plated for maximum protection against rust.
Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
Includes 1 Rear Sensor Wire
Buy with confidence from the originator & industry leader of brake kits

from

$260.99

This complete brake kit has been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
Rotors coated for optimum anti-corrosion protection
High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
Pads manufactured in Europe for European applications
ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Includes 2 front electronic pad wear sensors
Buy with confidence from the originator & industry leader of brake kits

from

$208.99

This complete brake kit has been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
Rotors coated for optimum anti-corrosion protection
High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
Pads manufactured in Europe for European applications
ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Includes 1 rear electronic pad wear sensor
Buy with confidence from the originator & industry leader of brake kits

from

$17.79

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied with the car
Low-friction PTFE coating to reduce drag
Maintains safe movement and effective stopping performance
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system
Stainless Steel Dual Coated

Top-Rated Brake Parts Brands For Your 2006 Land Rover LR3

Shop for the best-rated brands offering Brake Parts and other products for your 2006 Land Rover LR3s. Below you’ll find some of our best rated Brake Parts from Carquest Professional, Carquest, and Carquest Premium, and more. Brake Parts from these brands that fit a 2006 LR3 start at just $6.99 and are rated as high as 4.5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Professional 2006 Land Rover LR3 Brake Parts

When it comes to maintaining or upgrading your 2006 Land Rover LR3, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest Professional ticks all of those boxes. We offer a wide selection of Carquest Professional Brake Parts, specifically designed for the 2006 Land Rover LR3. With over 2 Carquest Professional brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $73.99, with an average price of just $74.49. Plus, with over 14 customer reviews and an average rating of 4.5 stars, you can trust that our Carquest Professional Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $73.99

(11)

Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Rear

“Seems to be quality pads. Came with hardware”

from $74.99

(3)

Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Front

“These seem to be very nice pads. This was my first time changing the pads in a Range Rover and the new pads and clips fit perfectly. The pads are perf”

Popular Carquest 2006 Land Rover LR3 Brake Parts

Carquest auto parts is one of the highest quality Brake Part brands in the market. Any 2006 Land Rover LR3 owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 2006 LR3, Advance Auto Parts carries a full inventory of 3 Carquest Brake Parts. Plus you will be keeping your Land Rover in peak condition while saving money because prices on these Carquest Brake Parts range from $6.99 to $144.99, plus, with more than 30 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from $144.99

(4)

Brake Rotor: Meets or Exceeds OE Specs

“Great price and quality”

from $18.99

(6)

Disc Brake Caliper Guide Pin Kit

“Overtorqued A bolt on caliper. My fault completely! Went too advanced and just needed this 1 replacement. To my surprise, it came with a set of bolts”

from $6.99

(20)

Disc Brake Caliper Guide Pin Boot Kit

“helpfull.”

FAQs for 2006 Land Rover LR3 Brake Parts

Which Brake Parts are best-sellers for 2006 Land Rover LR3s?

Out of 45 Brake Parts that fit 2006 Land Rover LR3s, the following parts are the top sellers:

Brake Pads: Ceramic, Long Life and Quiet – Rear (22973548) – $73.99
Painted Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield (11395416) – $111.99
Brake Pads: Ceramic, Long Life and Quiet – Front (22973547) – $73.99

What’s the price range for 2006 Land Rover LR3 Brake Parts?

Brake Part prices for the 2006 Land Rover LR3 start at $3.99 and go up to $683.99 for the most premium parts.

What’s the average price of a Brake Part for a 2006 Land Rover LR3?

The average price for Brake Parts for the 2006 Land Rover LR3 is $105.91. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Land Rover LR3 model years?

Yes, we currently carry Brake Parts for 3 model years of Land Rover LR3s between 2005 and 2009. Brake Parts are bought most frequently for the following model years: 2009, 2008, 2007, and 2005.

What are the cheapest Brake Parts for my 2006 Land Rover LR3?

The cheapest 2006 Land Rover LR3 Brake Parts we carry in stock are:

Disc Brake Caliper Repair Kit (10279078) – $3.99
Disc Brake Caliper Guide Pin Boot Kit (18310596) – $6.99
Disc Brake Caliper Repair Kit (10279076) – $9.49
Disc Pro Hardware Kit (10217616) – $17.79
Disc Brake Caliper Guide Pin Kit (10167973) – $18.99

What are the top-rated Brake Parts that fit the 2006 Land Rover LR3?

Out of 276 reviews by customers, our 2006 Land Rover LR3 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 2006 Land Rover LR3 and their top-rated products:

Brake Pads and Shoes
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Front (10644774) – $74.99
- Brake Pads: Ceramic, Long Life and Quiet – Front (22973547) – $73.99
- Brake Pad Wear Sensor (10002248) – $33.99
Brake Rotors and Drums
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Front (10644774) – $74.99
- Brake Pads: Ceramic, Long Life and Quiet – Front (22973547) – $73.99
- Brake Pad Wear Sensor (10002248) – $33.99

What types of Brake Parts do you sell for my 2006 Land Rover LR3?

As of 11/2/25, these are some of the most in-demand types of Brake Parts for a 2006 Land Rover LR3:

Can I get help with 2006 Land Rover LR3 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Land Rover Brake Parts and more.

What is your return policy for Land Rover LR3 Brake Parts?

Advance Auto Parts keeps returns simple. For new Land Rover LR3 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Land Rover LR3 Brake Parts

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH200922)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-8081)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)

Carquest Premium – Disc Brake Caliper Bracket (Part No.14-1713)

Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Front (Part No.PMD1098H)

Carquest Premium – Painted Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield (Part No.YH200488P)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3356A)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3357A)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Rear (Part No.17-1099)

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear (Part No.NAD1099)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1592)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1591)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K4059-36)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K6564-36)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14198)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14166)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41178)

Economy Black – Disc Brake Caliper Repair Kit (Part No.41169)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621515)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621516)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3325)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3324)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K6564)

Carquest Wearever – Disc Pro Hardware Kit (Part No.13577Q)

Carquest – Air Charge Temperature Sensor Connector (Part No.28419A)

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet – Front (Part No.GNAD1098)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1592)

Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Front (Part No.PMD1098H)

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet – Rear (Part No.GNAD1099)

Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet, Less Dust – Rear (Part No.PMD1099H)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1591)

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear (Part No.NAD1099)

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Front (Part No.NAD1098)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-1098)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Rear (Part No.17-1099)

PowerStop – Z16 Low-Dust Ceramic Brake Pads – Rear (Part No.16-1099)

Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA621518)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621517)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621515)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA621516)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH200922)

Carquest Premium – Painted Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield (Part No.YH200488P)

Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH200488C)

Brembo – Premium Coated Vented Brake Rotor (Part No.09.8873.31)

Brembo – Premium Coated Vented Brake Rotor (Part No.09.8876.31)

Brembo – Premium Coated Vented Brake Rotor (Part No.09.8874.31)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH200818)

Carquest Professional – Coated Brake Rotor: High Carbon Content for Improved Performance, RotorShield+ (Part No.YH200488HC)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14166)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3324)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14198)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3325)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3357A)

Carquest Premium – Disc Brake Caliper with Bracket (Part No.19-B3356A)

Carquest Premium – Disc Brake Caliper Bracket (Part No.14-1713)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41178)

Economy Black – Disc Brake Caliper Repair Kit (Part No.41169)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K4059-36)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K6564)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K4059)

PowerStop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads and Hardware Kit (Part No.ESK4059)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K4615-36)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K4615)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K6564-36)

PowerStop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads and Hardware Kit (Part No.ESK4615)

PowerStop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads and Hardware Kit (Part No.ESK6564)

Carquest Wearever – Disc Pro Hardware Kit (Part No.13577Q)