2006 Kia Amanti Suspension Parts
More 2006 Kia Amanti Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2006 Kia Amanti, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2006 Kia Amanti Suspension Parts
MOOG – Coil Spring Set (Part No.81718)
from
$111.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
CTR – Trailing Arm Bushing (Part No.L2006237248CTR)
from
$10.34
The CTR Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Monroe – Strut-Mate Strut Mounting Kit (Part No.905923)
from
$16.99
Monroe® Strut-Mate® mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe® struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate® mounting kits can include (as applicable by OE design): Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
Product Features:
See More
Product Features:
- Replacing all your worn strut components ensures a complete repair
- High-Quality premium strut components
- Engineered For Superior Fit And Performance
MOOG – Strut Mount Kit (Part No.K160056)
from
$17.49
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Provides like-new steering ease of installation and longer life
- Incorporates proven design and engineering features
KYB – STRUT BELLOW (Part No.L303734949KYB)
from
$27.78
STRUT BELLOW
MOOG – Suspension Strut Bellows (Part No.K90466)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
TRW – Twin Tube Shock Absorber (Part No.L4000852414TRW)
from
$106.08
TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.
Product Features:
See More
Product Features:
- TRW micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
- TRW advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out.
- Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
- Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
- TRW working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
- Twin-tube Design
International Suspension Group – Ride Control Shock Absorber (Part No.L4000654349ISG)
from
$75.76
The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium shocks to sense the vehicles velocity and road conditions. The Ride Control shocks adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.
Product Features:
See More
Product Features:
- Vented Striker Plate – Eliminates seal damage and prolongs strut life
- Teflon Banded Piston Seal – Provides superior sealing
- Multi-Shim Valve – For superior handling control and comfort
- Twin Tube Design – For extra protection, strength and durability
- Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
- PBT Bump Stop – Dampens noise and stops metal to metal contact
- Machine Mounting Eyes – Seamless for strength and durability
CTR – Control Arm (Part No.L2000321603CTR)
from
$91.08
The CTR control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Dorman – Suspension Control Arm (Part No.521-764)
from
$354.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm Bushing (Part No.K200033)
from
$14.79
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
MTC – Control Arm Bushing (Part No.L2030320147MTC)
from
$17.87
The MTC Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
MOOG – Strut Bellows (Part No.K90462)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – OESpectrum Strut Assembly (Part No.L3000570108MNR)
from
$176.61
TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.
Product Features:
See More
Product Features:
- All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Rod Displaced Valving – Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
- Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
- Twin Tube Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
- Hardened and Chrome Plated Piston Rod – Long service life.
- Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- Unique Rod Guide Single Lip Seal – Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
- Special Dust Boot/Jounce Bumper – Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. (Dust Boot and Jounce bumper sold separately)
Monroe – OESpectrum Strut (Part No.72244)
from
$136.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Rare Parts – Coil Spring Insulator (Part No.RP47052)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Rare Parts – Spring Insulator (Part No.RP47040)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172244)
from
$229.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Royal Purple – POWER STEERING FLUID (Part No.01326)
from
$6.29
POWER STEERING FLUID
MOOG – Suspension Strut Mount (Part No.K160225)
from
$75.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
Monroe – Strut-Mate Suspension Strut Mount (Part No.902058)
from
$36.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Suspension Trailing Arm (Part No.524-336)
from
$44.49
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Original Equipment – Trailing Arm (Part No.L2005116465OEA)
from
$115.61
Trailing Arm
Dorman – Suspension Trailing Arm (Part No.522-398)
from
$57.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
MOOG – Coil Spring Seat (Part No.K160257)
from
$17.49
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MOOG – Suspension Coil Spring Seat (Part No.K160255)
from
$18.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Popular 2006 Kia Amanti Suspension Parts Categories
2006 Kia Amanti Suspension Parts
You count on your 2006 Kia Amanti to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 42 Suspension Parts ranging in price from $1.90 to $273.99, you’re sure to find everything you need for your 2006 Kia Amanti.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 15 different brands like DriveWorks, Moog, and KYB. 2006 Kia Amanti Suspension Parts start as low as $1.90!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 33 extensive product reviews on 2006 Kia Amanti Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2006 Kia Amanti below to get started!
Top-Rated Suspension Parts Brands For Your 2006 Kia Amanti
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Kia Amanti running right for years to come. In our inventory you’ll find brands like DriveWorks, Moog, KYB, and even more.
Popular Driveworks Suspension Parts
You’ll find popular Driveworks brand products across Shocks and Struts. All are waiting to get your 2006 Kia Amanti back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated MOOG Suspension Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Suspension Parts for your 2006 Kia Amanti, and some of our most reviewed MOOG parts include:
FAQs for 2006 Kia Amanti Suspension Parts
What are the most purchased Suspension Parts for the 2006 Kia Amanti?
Out of 42 Suspension Parts for the 2006 Kia Amanti, the most popular in our inventory are:
