2006 Jeep Wrangler Exhaust System Kits

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

The MagnaFlow 1991-1995 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17126 brings additional off-roading prowess and our deep signature exhaust note to your 2.5L, 4.0L 1991-1995 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17126 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17126’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17126 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

MBRP XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system is rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime.

Product Features:

• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Rugged Sixteen Gauge T409 Stainless Steel Construction Can Be Counted On To Withstand Everything From Salt To Rocks, Tar To Grime
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• Everything Is Direct Fit To The OEM Hangers
• Bolt On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project

This Rebel Series cat-back exhaust system delivers quality, sound, performance and appearance for your Jeep JL 2 or 4 door model. Made from mandrel bent 409 stainless steel tubing for increased exhaust flow and performance, this dual rear exit system eliminates the primary muffler and uses a high flow, transverse rear muffler, finished in high temp black powder coating so it looks as good as it sounds. Dual 4-1/2″ stainless steel clamp-on tips with aFe POWER logos finish it off for the perfect combination of performance, value and style.

Product Features:

• Muffler Delivers A Powerful Exhaust Tone
• Custom Designed Rear Tip Brace w/Red aFe Power Logo
• 100% Hand MIG-Welded For Strength and Durability
• Unique Quad Exhaust Tips For A Unique Custom-Styled Look

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19437 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19437 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19437 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe’s Rebel Series, dual black tip cat-back exhaust system for your 2007 – 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2″ mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2″ angle-cut, black stainless steel exhaust tips are badged with laser-cut aFe POWER plates to finish off the Rebel Series exhaust system for the perfect combination of performance, value and style. Additional Performance: Compatible with aFe Power Twisted Steel Down-Pipe Loop Relocation Pipe (48-48022-HN or 48-48022-HC) to optimize your performance gain. Mild Tone A free-flowing, stainless steel, high temp metallic black, rear muffler assembly, engineered for the smoothest sounding performance available. A 14″ long, round front muffler assembly is used to absorb the high pitch tones. The rear, 18″ long, oval muffler is used to producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2″ Black Exhaust Tips: This dual rear-exit system features 4-1/2″ dia. high temp metallic black, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.

Product Features:

• Mandrel Bent Stainless Steel
• Long Round Front Muffler and Long Oval Rear Muffler
• Dual Muffler System For Smoothest Sounding Performance
• Dual Rear Exit Exhaust Tips

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• OE Style/Welded-On Hangers
• Free Flow Muffler

aFe’s Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2″ mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.

Product Features:

• Cost Effective System
• Tubing Is Less Restrictive Than Stock
• Increased Horsepower And Torque
• Aggressive Sound

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both the slip-fit and flange-fit cats. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• Simple 1-Piece Design
• Free Flow Muffler
• Hi-Tuck Tip

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• Free Flow Muffler
• OE Style/Welded-On Hangers

The MagnaFlow 2000-2006 Jeep Wrangler Competition Series Cat-Back Performance Exhaust System 16390 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16390 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16390’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

This durable, purpose-built, cat-back exhaust system improves clearance over rough terrain for the Jeep JK adventurist who wants it all. Large, 2 ½” to 3″ mandrel-bent 409 stainless steel tubing outflows the restrictive OE exhaust to increase torque and horsepower while a free-flowing muffler delivers a powerful, performance tone. The ROCK BASHER’S unique pre-axle turn down tip handles off-road obstacles and utilizes factory mounts for a qui ck and simple install. This cat-back exhaust system has a turn down tip under the vehicle, before the rear axle, to take on rough terrain and off-road obstacles. No more smashed tips. An 18″ long, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound while unleashing all available horsepower and torque.

Product Features:

• Free Flowing Stainless Steel Muffler
• Aggressive Sound
• MIG Welded For Strength
• Steel Band Clamps

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience