2006 Isuzu I-350 Ignition and Tune-Up Products
More 2006 Isuzu I-350 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2006 Isuzu I-350, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2006 Isuzu I-350 Ignition and Tune-Up Products
Carquest Premium – Ignition Coil Seal (Part No.FAA1099)
from
$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Designed to match OE in form to ensure proper, trouble free fit
- Premium quality materials for longer service life
Carquest Premium – Ignition Switch (Part No.CSC1218)
from
$104.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.74)
from
$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.
Product Features:
See More
Product Features:
- E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
- Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
- Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
- Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
- E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
- The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
- Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
- Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
- Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
- Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5263)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, ZTJ16VR10 (Part No.3539)
from
$9.99
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
ACDelco – Relay (Part No.P2020848844ACD)
from
$14.95
Relay
ACDelco – GM Original Equipment Ignition Knock (Detonation) Sensor (Part No.F6020205037ACD)
from
$39.97
An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3734)
from
$39.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Prenco – Prenco Direct Ignition Coil Boot (Part No.F3006183094PRN)
from
$11.36
Prenco Coil on Plug Boots provide the best protection possible for your ignition system versus the harsh environment created by the modem day engine. Prenco Coil on Plug Boots are constructed using the finest quality materials and compounds, and produced with superior quality tooling that exactly matches the Original Equipment Boot.
Product Features:
See More
Product Features:
- Prenco Coil on Plug Boots are produced using precise computer designed tooling and premium quality materials/compounds that are formulated to perform in extreme temperatures.
- Prenco Coil on Plug Boots are designed as a direct replacement for the OE Boot. Springs, grommets and ferrite resistors are provided for all applications where applicable.
- Inspect and replace Coil on Plug Boots every 50,000 miles and/or with every spark plug change to ensure optimum engine efficiency and performance.
- Replacing Coil and Plug Boots at regular intervals will prevent/correct misfires and will help to minimize further costly damage to Ignition Coils, Sensors, Catalytic Convertors, and ECUs.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7003)
from
$7.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – Coil on Plug Boot (Part No.58921)
from
$5.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Carquest Premium – Ignition Coil Connector (Part No.PTA1335)
from
$48.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Ignition Coil (Part No.GN10114)
from
$104.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48844)
from
$107.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1006)
from
$73.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest – Ignition Coil (Part No.E255)
from
$80.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from insulated iron powder limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Stainless steel spring resists corrosion
- Tin-plated brass terminals improve electrical contact and protect against corrosion
- High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
GM Genuine Parts – Ignition Coil (Part No.19300921)
from
$167.99
Product Features:
See More
- For proper installation, locate your nearest GM dealer, independent service center, or body shop
- Precise fit for ease of installation
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1344)
from
$81.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-007GMP)
from
$38.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
DENSO – Coil On Plug Boots-5 (Part No.671-5008)
from
$31.49
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Popular 2006 Isuzu I-350 Ignition and Tune-Up Products Categories
2006 Isuzu I-350 Ignition and Tune-Up Products
You count on your 2006 Isuzu I-350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 40 Ignition and Tune-Up Products ranging in price from $4.29 to $167.99, you’re sure to find everything you need for your 2006 Isuzu I-350.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like Autolite, ACDelco, and E3. 2006 Isuzu I-350 Ignition and Tune-Up Products start as low as $4.29!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 784 extensive product reviews on 2006 Isuzu I-350 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RE10PMC5 with 4.7 stars and Iridium IX Spark Plug: Single Iridium Fine Wire, LTR5IX-11 with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2006 Isuzu I-350 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2006 Isuzu I-350
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Isuzu I-350 running right for years to come. In our inventory you’ll find brands like Autolite, ACDelco, E3, and even more.
Popular Carquest Ignition and Tune-Up Products
You’ll find popular Carquest brand products across Ignition Coils and Boots. All are waiting to get your 2006 Isuzu I-350 back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Autolite Iridium Ignition and Tune-Up Products
If Autolite Iridium are what you’re looking for, our inventory holds plenty. We stock Autolite Iridium brand Ignition and Tune-Up Products for your 2006 Isuzu I-350, and some of our most reviewed Autolite Iridium parts include:
from
$4.79
(182)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$9.99
(133)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$6.49
(102)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2006 Isuzu I-350 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2006 Isuzu I-350?
Out of 40 Ignition and Tune-Up Products for the 2006 Isuzu I-350, the most popular in our inventory are:
from
$11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
What are the top-rated 2006 Isuzu I-350 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2006 Isuzu I-350 based on customer reviews/ratings are:
from
$4.29
(49)
Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RE10PMC5
“Great price and excellent service per usual! A+”
