2006 IC Corporation 1652 SC Fuel Injectors
More 2006 IC Corporation 1652 SC Fuel Injectors
Find your specific 2006 IC Corporation 1652 SC original or aftermarket Fuel Injectors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 IC Corporation 1652 SC Fuel Injectors
Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (Part No.904-229)
from
$209.99
This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
- Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
- No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
- Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future
Tech Smart – Fuel Injector Control Module (Part No.R76001)
from
$224.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.
Product Features:
See More
Product Features:
- Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
- 100% new, not remanufactured, so there’s no leftover debris that may cause failure
- Re-engineered circuit board layout
- Higher-quality electronics protect critical components from excess heat that can lead to failure
Cardone – Injection Pressure Regulating Valve (Part No.2V-232)
from
$495.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.
Product Features:
See More
Product Features:
- Built and 100% tested to perform like the original, with all standard wear items replaced
- Air decay tested to ensure on-car performance
- Designed for easy installation and setup
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Dorman – Fuel Pressure Regulator Upgrade Kit (Part No.904-490)
from
$38.99
This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Delphi – Fuel Injector (Part No.EX63804AE)
from
$298.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-201)
from
$387.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX63803AD)
from
$335.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Dorman – Diesel Fuel Injector O-ring Kit (Part No.904-207)
from
$10.49
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Product Features:
See More
Product Features:
- Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
- Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Popular 2006 IC Corporation 1652 SC Fuel Injectors Categories
2006 IC Corporation 1652 SC Fuel Injectors
Maybe you’re in the middle of a full rebuild of that 2006 IC Corporation 1652 SC. Maybe you just need a couple of Fuel Injectors. Either way, Advance Auto Parts has 6 different Fuel Injectors in our inventory ranging from $10.49 to $495.99. That means you can find the exact parts or products you need to keep that 2006 IC Corporation 1652 SC running smoothly.
Fuel Injectors are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2006 IC Corporation 1652 SC. Dorman, Cardone, and Tech Smart are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Fuel Injectors for your 2006 IC Corporation 1652 SC, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Fuel Injectors to keep your 2006 IC Corporation 1652 SC rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Fuel Injectors Brands To Make Your 2006 IC Corporation 1652 SC Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 IC Corporation 1652 SC demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Injectors make up Advance Auto Parts’ inventory, and all are ready to help make your 1652 SC the best it can be. Be sure to browse some of our top Fuel Injectors brands and parts.
Popular Tech Smart Fuel Injectors
We carry Tech Smart parts in our stock across Fuel Injector Control Modules categories, plus more. For a 2006 IC Corporation 1652 SC, our most popular Tech Smart Fuel Injectors include:
Top 2006 IC Corporation 1652 SC Fuel Injectors from Dorman
Dorman products are another trusted brand when it comes to Fuel Injectors for your 2006 IC Corporation 1652 SC. Popular Dorman parts include:
from
$209.99
(21)
Fuel Injection Control Module Repair Kit – No Flash Required
Fuel Injector Control Modules
FAQs for 2006 IC Corporation 1652 SC Fuel Injectors
What are the most purchased Fuel Injectors for the 2006 IC Corporation 1652 SC?
Out of 6 Fuel Injectors for the 2006 IC Corporation 1652 SC, the most popular in our inventory are:
