2006 Hummer H1 Drivetrains
More 2006 Hummer H1 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2006 Hummer H1, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2006 Hummer H1 Drivetrains
Yukon Gear – Model 20 Inner Axle Seal (Part No.30175)
from
$9.99
Model 20 inner axle seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear inner axle seal
- Fits AMC Model 20
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Pinion Install Kit For Model 20 Differential (Part No.13082)
from
$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
USA Standard Gear – Ring & Pinion Gear Set For Model 20 In A 4.88 Ratio (Part No.36232)
from
$302.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- 8.875″ ring gear diameter
- 28 spline pinion
- 8 ring gear bolts
- 4.88 ratio
Yukon Gear – Yoke For Model 20 With A 1310 U/Joint Size (Part No.41096)
from
$161.99
Yukon yoke for Model 20 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- 28 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
National – Bearings (Part No.FC-66561)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Master Overhaul Kit for the ‘Model 20 Differential (Part No.37065)
from
$248.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – Crush Sleeve (Part No.33085)
from
$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
- 0.480″ tall
National – Multi Purpose Seal (Part No.341022)
from
$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Motive Gear – Differential Carrier Shim Kit (Part No.1130)
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
National – Shaft Repair Sleeve (Part No.99225)
from
$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Spicer – Universal Joint (Part No.5-1330X)
from
$37.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Bearings (Part No.3420)
from
$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Locker for Model 20 Differential with 29 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17006)
from
$657.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Driveworks – Oil Seal (Part No.S-3946)
from
$4.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Bearing Race Driver (Part No.56020)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M802011 race
- All steel construction
National – Multi Purpose Seal (Part No.714675)
from
$19.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Gear Install Kit (Part No.AM20IK)
from
$52.79
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)
from
$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R20RMK)
from
$131.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG & SL MSTR AMC 20
Yukon Gear – Finned Polished Aluminum Cover For Amc Model 20 (Part No.32031)
from
$261.99
Finned Polished aluminum cover for AMC Model 20.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- Finned polished aluminum
Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)
Popular 2006 Hummer H1 Drivetrains Categories
2006 Hummer H1 Drivetrains
You count on your 2006 Hummer H1 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 108 Drivetrains ranging in price from $1.99 to $883.99, you’re sure to find everything you need for your 2006 Hummer H1.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 9 different brands like DriveWorks, Spicer, and National. 2006 Hummer H1 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 143 extensive product reviews on 2006 Hummer H1 Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Seal with 3.3 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2006 Hummer H1 below to get started!
Top-Rated Drivetrains Brands For Your 2006 Hummer H1
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Hummer H1 running right for years to come. In our inventory you’ll find brands like DriveWorks, Spicer, National, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 2006 Hummer H1 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 2006 Hummer H1, and some of our most reviewed Driveworks parts include:
FAQs for 2006 Hummer H1 Drivetrains
What are the most purchased Drivetrains for the 2006 Hummer H1?
Out of 108 Drivetrains for the 2006 Hummer H1, the most popular in our inventory are:
What are the top-rated 2006 Hummer H1 Drivetrains?
Top-rated Drivetrains for your 2006 Hummer H1 based on customer reviews/ratings are:
from
$19.79
(9)
Multi Purpose Seal
“This is for your 2000 Jeep Grand Cherokee 4.0 rear differential pinion seal. It is a quick replacement make sure you have a impact gun to remove the p”
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$25.99
(1)
Multi Purpose Seal
“Perfect replacement for the piece of you know what leaky rear output seal that came with my 231 SYE kit.”
