2006 GMC Canyon Drivetrains
More 2006 GMC Canyon Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2006 GMC Canyon, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2006 GMC Canyon Drivetrains
Dorman – 4WD Locking Hub Actuator (Part No.K7027699827DOR)
from
$172.25
More like a complete kit than a single part, Dorman’s Four-Wheel Drive (4WD) Actuator comes with all the parts needed to complete the repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Includes all necessary gaskets and seals (where applicable)
- Sealed for leak resistance
- Engineered for durability against harsh road and weather conditions, including water intrusion
- Quality tested to ensure trouble free installation and performance
Yukon Gear – High Performance Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio (Part No.24145)
from
$407.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.6″
- 7.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 3.42 ratio
Yukon Gear – Pinion Install Kit For ’09 & Up GM 8.6" Differential (Part No.13105)
from
$186.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. .
Product Features:
See More
Product Features:
- Fits 2009 and up GM 8.6″
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Felpro – Differential Cover Gasket (Part No.RDS 55479)
from
$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Motive Gear – Ring Gear Bolt (Part No.14066913)
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
ACDelco – Differential Bearing (Part No.J7060723477ACD)
from
$69.63
Differential Bearing
Yukon Gear – Standard Open Case For GM 7.625" IFS Front, Fits All Ratios (Part No.20139)
from
$289.99
Product Features:
See More
- Standard open carrier case
- Does not include spider gears
- Fits GM 7.6″ IFS
Yukon Gear – 10 Bolt Open Spider Gear Set For ’00-’06 8.6" GM With 30 Spline Axles (Part No.16056)
from
$207.99
10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number 7875 & 1073.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits 2000-2006 GM 8.6″ open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Pro-King – Differential Internal Nest Kit (Part No.742A717)
from
$215.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Master Overhaul Kit for the ’09 and Newer GM 8.6" Differential (Part No.37060)
from
$315.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits 2009 and up GM 8.6″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Polished Aluminum Cover For 8.6", 8.2" And 8.5" GM Rear (Part No.32030)
from
$255.99
Polished aluminum cover for 8.6″, 8.2″ and 8.5″ GM rear.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- Finned polished aluminum
Motive Gear – Differential Bearing Kit – Timken (Part No.RG8RT)
from
$150.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
Pro-King – Differential Pinion Shim Kit (Part No.742G202)
from
$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Powertrax – Grip LS Traction System (Part No.LS201030)
from
$503.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)
from
$483.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 18 piece kit
- Steel clutches
Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)
from
$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for GM 8.5″ and 8.6″
- Fits standard open differentials only
- 0.795″ I.D.
EMPI/Empire – Axle Nut (Part No.K40301617413EMP)
from
$4.93
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Felpro – Differential Cover Gasket (Part No.RDS 55477)
from
$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)
from
$10.99
8.2″ & 8.5″ rear cover gasket.
Product Features:
See More
Product Features:
- Cover gasket
- Fits GM 8.2″, 8.5″ and 8.6″
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)
from
$189.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- 30 spline
- Mechanics 3R u-joint size
- 2.556″ snap ring span
- 1.125″ cap diameter
- Inside snap ring design
- Strap style
Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)
from
$231.99
This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.
Product Features:
See More
Product Features:
- GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008
Popular 2006 GMC Canyon Drivetrains Categories
2006 GMC Canyon Drivetrains
You count on your 2006 GMC Canyon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 277 Drivetrains ranging in price from $2.49 to $1,014.99, you’re sure to find everything you need for your 2006 GMC Canyon.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Moog, DriveWorks, and Spicer. 2006 GMC Canyon Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,326 extensive product reviews on 2006 GMC Canyon Drivetrains. Some of the top-rated Drivetrains products we carry are 4WD Actuator, Front Axle with 4.5 stars and Greaseable Super Strength Universal Joint with 3.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2006 GMC Canyon below to get started!
Top-Rated Drivetrains Brands For Your 2006 GMC Canyon
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 GMC Canyon running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Anchor Drivetrains
You’ll find popular Anchor brand products across Drive Shafts and Axles. All are waiting to get your 2006 GMC Canyon back on the road. Some of the top-rated Anchor products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2006 GMC Canyon, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2006 GMC Canyon Drivetrains
What are the most purchased Drivetrains for the 2006 GMC Canyon?
Out of 277 Drivetrains for the 2006 GMC Canyon, the most popular in our inventory are:
What are the top-rated 2006 GMC Canyon Drivetrains?
Top-rated Drivetrains for your 2006 GMC Canyon based on customer reviews/ratings are:
