2006 Ford Mustang Suspension Parts
More 2006 Ford Mustang Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2006 Ford Mustang, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2006 Ford Mustang Suspension Parts
MOOG – Coil Spring Set (Part No.8621)
from
$131.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
KAI – Control Arm (Part No.GMK302197368S)
from
$104.99
New Goodmark Driver Or Passenger Side Front Lower Control Arm Assembly, 2 Required
Product Features:
See More
Product Features:
- 2 Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Whiteline – Control Arm Lower Rear Mounting Bracket (Part No.KBR37)
from
$195.99
The S197 requires geometry correction once the rear of the car has been lowered to correct the rear lower control arm angles. Whiteline’s rear control arm brackets relocate the control arms to correct the modified geometry and improve anti-squat, reducing rear-dive under acceleration.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Precisely placed dampening voids further reduces harshness from sudden road inputs.
MOOG – Strut Bellows (Part No.K90462)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
MOOG – Coil Spring Set (Part No.81077)
from
$76.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Strut-Mate Strut Mounting Kit (Part No.905915)
from
$103.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Alignment Trailing Arm (Part No.528-298)
from
$207.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Whiteline – Sway Bar/ Coil Spring Vehicle Kit (Part No.GS1-FRD011)
from
$1150.99
The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) sway bars, drop links and performance lowering springs.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172540)
from
$226.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
KYB – Gas Shock (Part No.343163)
from
$30.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Classic Ford Or Mercury
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Whiteline – Brace Lower Control Arm To Sway Bar (Part No.KSB726)
from
$325.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Energy Suspension – Control Arm Bushing Set (Part No.4.3115R)
from
$144.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Whiteline – Control Arm Upper Arm (Part No.KTA167)
from
$176.99
Whiteline’s upper control arms are built with tubular DOM steel tubing, forged end rings, and formed clevises for optimal strength. Equipped with grease free GIIRO bushings engineered specifically for this application, these arms work to improve handling, without added maintenance or NVH.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Suncore – Shock Kit (Part No.2-12S252400-001)
from
$39.99
Shock Kit
Carquest Premium – Multi Purpose Relay (Part No.RAA1257)
from
$29.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
KYB – Excel-G Strut Assembly (Part No.L3000456436KYB)
from
$177.09
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.
Product Features:
See More
Product Features:
- Restores OE performance
- One way anti-foaming valve reduces foaming and performance fade
- Three stage dual valving
- Teflon coated piston valve
- Seamless inner cylinder and eye ring, no leaks
- Bonded bushings and sleeves
- Hard chromed piston rod
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172138)
from
$256.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
MOOG – Suspension Strut Mount (Part No.K160367)
from
$75.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Superior rubber to steel bonding for durability
- Engineered to meet or exceed OE requirements
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Mounting Kit (Part No.901925)
from
$47.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suncore – Quick Strut Kit (Part No.2-55S11950-001)
from
$259.99
Quick Strut Kit
Whiteline – Brace Chassis Support (Part No.KSB729)
from
$162.99
The S197 Mustang chassis features a rear chassis Brace to assist in absorbing the load that would otherwise be stressed onto the panhard rod. The stock Brace is merely stamped lightweight steel, but Whiteline’s rear chassis Brace is a heavy duty boxed steel and reduces the force on the panhard.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
Whiteline – Coil Springs Lowered (Part No.WSK-FRD005)
from
$350.99
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 3.4kg/mm (190lb/in) front rated springs that provide a 35mm drop while the 4.8kg/mm (269lb/in) rated rears deliver a desirable 45mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.
Product Features:
See More
Product Features:
- Cold rolled in Europe from the highest quality material.
- These progressive rate springs are designed to provide improved performance without compromising ride quality characteristics.
- Engineered for superior fit/performance with OEM shocks while produced to the finest tolerances ensuring exact fitment.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline – Coil Springs Lowered (Part No.WSK-FRD006)
from
$348.99
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 3.5kg/mm (196lb/in) front rated springs that provide a 35mm drop while the 11.8kg/mm (661lb/in) rated rears deliver a desirable 30mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.
Product Features:
See More
Product Features:
- Cold rolled in Europe from the highest quality material.
- Engineered for superior fit/performance with OEM shocks while produced to the finest tolerances ensuring exact fitment.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline – Coil Springs Lowered (Part No.WSK-FRD011)
from
$369.99
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 3.5kg/mm (196lb/in) front rated springs that provide a 25mm drop while the 11.8kg/mm (661lb/in) rated rears deliver a desirable 25mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.
Product Features:
See More
Product Features:
- Cold rolled in Europe from the highest quality material.
- Cold rolled in Europe from the highest quality material.
- These progressive rate springs are designed to provide improved performance without compromising ride quality characteristics.
- Engineered for superior fit/performance with OEM shocks while produced to the finest tolerances ensuring exact fitment.
aFe POWER – Lowering Spring Kit (Part No.410-301001-N)
from
$298.99
aFe Control lowering springs increase cornering and performance handling, giving you the confidence to take that turn without adversely affecting ride quality. The lowered stance will transform the appearance as well as offer improve aerodynamics. Designed as a direct fit application these springs require no modifications to the vehicle. Made in the USA and are engineered to optimize the factory shock absorber damping and offer a 1.5″ (38mm) front and 1.25″ (31.75mm) rear drop for the perfect blend of performance and style
Product Features:
See More
Product Features:
- Engineered To Optimize The Factory Shock Absorber Damping
- 1 To 1.25 in. Of Drop
- Optimized Design For Both V6 and V8 Applications
- Powder coat Gloss Silver For Unbeatable Looks And Durability
aFe POWER – Lowering Spring Kit (Part No.410-301002-N)
from
$298.99
aFe Control lowering springs increase cornering and performance handling, giving you the confidence to take that turn without adversely affecting ride quality. The lowered stance will transform the appearance as well as offer improve aerodynamics. Designed as a direct fit application these springs require no modifications to the vehicle. Made in the USA and are engineered to optimize the factory shock absorber damping and offer a 1.5″ (38mm) front and 1.25″ (31.75mm) rear drop for the perfect blend of performance and style
Product Features:
See More
Product Features:
- Engineered To Optimize The Factory Shock Absorber Damping
- 1 To 1.25 in. Of Drop
- Optimized Design For Both V6 and V8 Applications
- Powder coat Gloss Silver For Unbeatable Looks And Durability
Popular 2006 Ford Mustang Suspension Parts Categories
2006 Ford Mustang Suspension Parts
You count on your 2006 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 45 Suspension Parts ranging in price from $6.29 to $948.99, you’re sure to find everything you need for your 2006 Ford Mustang.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 12 different brands like Valvoline, Monroe, and Carquest Premium. 2006 Ford Mustang Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 134 extensive product reviews on 2006 Ford Mustang Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Boot Kit with 2.6 stars and OESpectrum Strut with 4.6 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2006 Ford Mustang below to get started!
Top-Rated Suspension Parts Brands For Your 2006 Ford Mustang
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Ford Mustang running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Carquest Premium, and even more.
Popular MOOG Suspension Parts
You’ll find popular MOOG brand products across Coil and Leaf Springs. All are waiting to get your 2006 Ford Mustang back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Valvoline Suspension Parts
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Suspension Parts for your 2006 Ford Mustang, and some of our most reviewed Valvoline parts include:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
FAQs for 2006 Ford Mustang Suspension Parts
What are the most purchased Suspension Parts for the 2006 Ford Mustang?
Out of 45 Suspension Parts for the 2006 Ford Mustang, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
from
$155.99
This product is not rated
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
What are the top-rated 2006 Ford Mustang Suspension Parts?
Top-rated Suspension Parts for your 2006 Ford Mustang based on customer reviews/ratings are:
from
$37.49
(9)
Strut-Mate Strut Boot Kit
“The boot snd bumper fit perfectly knto the upper strut mount on my 2011 f150, although they dont fit under the upper rubber for the spring like OEM th”
from
$256.99
(1)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
“Fit our 2009 V6 mustang with no issues. Car drives much better and it’s way less hassle just buying a complete bolt in strut assembly. Let’s hope they”
