2006 Ford F650 Fuel and Emissions Systems

Name: EGR Valve
Brand: Carquest Premium
SKU: EGG2417
Price: 445.99 USD

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2006 F650. Advance Auto Parts has popular F650 parts like Fuel Tanks, Fuel Injectors, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F650 model years including 2013, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2006 Ford F650 Fuel and Emissions Systems below and start saving instantly.

Popular 2006 Ford F650 Fuel and Emissions Systems Categories

Fuel Injector Control Modules

Fuel Pressure Sensors

Gas Caps

Diesel Injection Control Pressure Sensors

Vacuum Pumps

Fuel Injection Nozzles

Diesel Injection High Pressure Oil Pumps

Fuel Injector Sleeves

MAP-Barometric Pressures

Manifold Air Pressure Sensors

Fuel and Water Separators

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Pressure Regulator Kits

Fuel Injection Pressure Regulator Seals

Fuel Injector Harness

EGR Valve Gaskets

EGR Vacuum Regulator Solenoid Connectors

Essential Fuel and Emissions Systems for 2006 Ford F650s

from

$445.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$73.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$51.99

This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$215.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$6.29

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$182.99

No matter what the application, there is a unique Motorcraft and Ford Part designed, manufactured and comprehensively tested to perform to Ford specifications and quality standards.

Product Features:

Why Buy:
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these aftermarket replacement parts, ensuring the most current technology and performance.
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

from

$73.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$164.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Carquest Premium line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$8.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$34.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$359.99

Delphi knows OE technology and how to service diesel systems. For more than 60 years, we have partnered with 25 OEM’s to bring our OE diesel powertrain knowledge and expertise to the aftermarket. Delphi diesel systems operate at high performance to meet today’s tough emissions standards and are built to OE specifications for the fit, form, and function technicians expect. Trust Delphi for an unrivalled, cost-effective diesel program to help build your business.

Product Features:

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$71.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$15.99

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$132.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$82.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Harness connects between valve cover gasket connector and fuel injectors and glow plugs
One required per side

from

$209.99

The FICM on certain Ford and Navistar vehicles is mounted in a location where it’s exposed to constant heat and vibration, often causing the internal inverter board to stop working properly. When that happens, the only replacement available from the OEM is a complete module assembly, with a housing, controller board and power board, that needs to re-initialized to the vehicle using proprietary programming tools. This Dorman OE FIX fuel injector control module repair directly replaces only the inverter board to reduce the overall repair cost as well as avoid having to program the module, allowing for a DIY repair. This improved component also features an additional securing compound that helps control vibrations and make it less likely to fail the same way again.

Product Features:

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$1242.00

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Exact fit original equipment replacements means easy installation
Delphi injection pumps are produced in a Delphi ISO 9001:2008 certified facility
All parts used in the rebuild process are Delphi validated
All Delphi injection pumps are tested utilizing OE methodologies
All pumps are functionally tested for correct operation which improves pump reliability

from

$140.99

This fuel pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pressure sensor is designed to match the fit and function of the original sensor on specified vehicle
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$346.99

The original EGR cooler for certain vehicles features a fin design that is prone to clogging. Dorman’s OE FIX EGR cooler modifies the OE design by using spiral tubes that are optimized to cool exhaust gas efficiently and reduce clogging.

Product Features:

Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design
Superior durability – precision-engineered using welded stainless steel for long service life
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Hardware included – all necessary O-rings, gaskets, and application-specific hardware included

from

$395.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$53.99

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Contains Sensor Port Thread: 1 1/4-10;Integral Post Seal
Includes Integral Post Seal. Sensor Port Thread: 1 1/4-10
CAUTION: Furnished O-Ring must be installed on post for seal.

from

$89.99

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Made in USA
Includes Sensor Port Thread: M14 x 2.0
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$132.99

FUEL INJ KIT

from

$14.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$59.99

FUEL INJ KIT

Upgrade your 2006 Ford F650 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Ford F650, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F650 functioning at its best. At Advance Auto Parts, we offer a wide selection of 37 Fuel and Emissions Systems for the 2006 Ford F650, designed to meet your needs without breaking the bank. From Fuel Tank replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2006 Ford F650 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $10.49 to $988.99, with an average price of $228.44. Our 37 Fuel and Emissions Systems in stock come from 7 trusted brands, so you’re sure to find the right part for your 2006 Ford F650 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford F650, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Dorman, and more. Carquest Fuel and Emissions Systems start at just $295.99 and boast an impressive 4.4 stars average rating from customers. With 58 customer reviews and counting, our 2006 Ford F650 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Ford F650 is always ready to roll. We’re committed to providing you with everything you need to keep your F650 in top shape, all in one place. Start shopping confidently below for your 2006 Ford F650!

Best-Selling Fuel Tanks for 2006 Ford F650s

Enhance the driving experience in your Ford with 1 quality Fuel Tank components, starting at $215.99.

show more show less

from

$215.99

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

Most Popular 2006 Ford F650 Fuel Injectors

Customize your Ford with 20 Fuel Injectors products like Fuel Injectors, Fuel Injector O-Ring Kits, and Fuel Injector Seal Kits, all priced under $931.99.

show more show less

from

$209.99

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$51.99

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$295.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$10.49

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$281.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100 percent to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance.

from

$264.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$14.99

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
Premium OE quality materials
Services one injector

from

$322.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.

from

$296.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
New spool valves are designed with updated features to reduce injector stiction
Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$34.49

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$45.99

This complete repair solution allows repair and upgrade of the fuel pressure regulator. The updated spring increases factory fuel pressure which improves injector operation and longevity. Low fuel pressure on the 6.0L Power Stroke can result in loss of power under full load and premature injector failure.

Product Features:

Includes updated spring
Includes housing seal and fitting O-ring
Includes technical bulletin and installation instructions

from

$394.99

This complete repair solution allows replacement of the fuel injector harness on the Ford 6.0L Power Stroke engine. The harness connects between the Fuel Injection Control Module (FICM) and fuel injectors. Chafing and damage to the OE harness is common due to improper OE routing and contact with sharp engine components. This can result in an engine misfire or no-start condition or damage to other components in the system. This new harness allows proper routing to eliminate this condition.

Product Features:

Includes all new wiring and connectors
Upgraded harness wrap reduces potential for chafing
Includes technical bulletin and installation tips

from

$931.99

Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
New spool valves are designed with updated features to reduce injector stiction
Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
Includes all new premium quality o-rings and seals
Includes copper combustion seal
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$735.99

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$724.99

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$700.99

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$495.99

CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$261.99

Fuel Injection Pressure Regulator

from

$15.99

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

Top Picks for 2006 Ford F650 Gas Caps

Upgrade Ford F650s with top-quality Gas Caps parts, including 2 OEM and aftermarket selections for your 2006 model.

show more show less

from

$118.99

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting

from

$81.99

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

In-Demand Air Flow Sensors for 2006 Ford F650s

Select from 2 premium Air Flow Sensors parts for your 2006 Ford F650, with prices ranging from $71.99 to $79.99.

show more show less

from

$71.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$79.99

This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 2006 Ford F650 Fuel Pumps

Explore our best-selling Ford parts for the 2006 F650 among 2 OEM and aftermarket options starting from $53.99.

show more show less

from

$83.99

CAUTION: Furnished O-Ring must be installed on post for seal. For use with Deutz square sensor. NOT Interchangeable with 86422.
Sensor Port Thread: M14 x 2.0; Standpipe
Includes Standpipe. Sensor Port Thread: M14 x 2.0
CAUTION: Furnished O-Ring must be installed on post for seal. For use with Deutz square sensor.

from

$53.99

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Contains Sensor Port Thread: 1 1/4-10;Integral Post Seal
Includes Integral Post Seal. Sensor Port Thread: 1 1/4-10
CAUTION: Furnished O-Ring must be installed on post for seal.

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Ford F650

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2006 Ford F650s. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2006 F650 start at just $51.99 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 2006 Ford F650 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Ford F650, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Fuel and Emissions Systems, specifically designed for the 2006 Ford F650. With over 1 Carquest brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $295.99. Plus, with over 1 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $295.99

(1)

Fuel Injector

“In a daily driver”

Popular Dorman 2006 Ford F650 Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2006 Ford F650 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2006 F650, Advance Auto Parts carries a full inventory of 3 Dorman Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range from $51.99 to $209.99, plus, with more than 32 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $209.99

(21)

Fuel Injection Control Module Repair Kit – No Flash Required (OE Fix)

“Great product! No problems at all”

from $51.99

(2)

Fuel Pressure Regulator

“Worked great and employees are awesome”

from $132.99

(9)

Electric Vacuum Pump

“Fixed cruise control issue on 04 Cummins TD”

FAQs for 2006 Ford F650 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2006 Ford F650s?

Out of 37 Fuel and Emissions Systems that fit 2006 Ford F650s, the following parts are the top sellers:

Fuel Injector (10015613) – $295.99
Injection Pressure Regulator (IPR) Valve (11450436) – $264.99
Fuel Injector Seal Kit (11488595) – $14.99

What’s the price range for 2006 Ford F650 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2006 Ford F650 start at $10.49 and go up to $988.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2006 Ford F650?

The average price for Fuel and Emissions Systems for the 2006 Ford F650 is $228.44. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F650 model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of Ford F650s between 2000 and 2023. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Fuel and Emissions Systems for my 2006 Ford F650?

The cheapest 2006 Ford F650 Fuel and Emissions Systems we carry in stock are:

Diesel Fuel Injector O-ring Kit (20471044) – $10.49
Fuel Injector Seal Kit (11488595) – $14.99
Fuel Injector O-Ring Kit (11918763) – $14.99
Fuel Injector Sleeve (11488584) – $15.99
Fuel Injection Pressure Regulator Seal Kit (11695608) – $34.49

What are the top-rated Fuel and Emissions Systems that fit the 2006 Ford F650?

Out of 58 reviews by customers, our 2006 Ford F650 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2006 Ford F650 and their top-rated products:

Exhaust Gas Recirculation (EGR) Parts
- Exhaust Gas Recirculation Cooler Kit (OE Fix) (10609076) – $417.99

What types of Fuel and Emissions Systems do you sell for my 2006 Ford F650?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2006 Ford F650:

Can I get help with 2006 Ford F650 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F650 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F650 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Ford F650 Fuel and Emissions Systems

Carquest Premium – EGR Valve (Part No.EGG2417)

Carquest Premium – Multi-Use Connector (Part No.PTA1207)

Dorman – Fuel Pressure Regulator (Part No.904-239)

Dorman – FUEL TANK STRAP (Part No.578-705)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1215)

Motorcraft – Fuel Injection Pressure Regulator (Part No.CM-5185)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1049)

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1005K)

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CN-5019-RM)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Dorman – Fuel Injection Pressure Regulator Seal Kit (Part No.904-415)

Delphi – Fuel Injector (Part No.EX639349)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Carquest Premium – Fuel Injector Sleeve (Part No.AC20132)

Dorman – Electric Vacuum Pump (Part No.904-214)

Carquest Premium – Fuel Injector and Glow Plug Harness (Part No.AC20102)

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (OE Fix) (Part No.904-229)

Delphi – Diesel High Pressure Oil Pump (Part No.HTP123)

Dorman – HD Solutions – Fuel Pressure Sensor (Part No.904-7029)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Dorman – Exhaust Gas Recirculation Cooler Kit – Not CARB Compliant (OE Fix) (Part No.904-405)

Carquest Premium – Exhaust Gas Recirculation (EGR) Cooler (Part No.DEN1001)

Carquest Premium – Fuel/Water Separator: Quality Removal of Water and Contaminants from Fuel System (Part No.86408)

Carquest Premium – Fuel/Water Separator: Quality Removal of Water and Contaminants from Fuel System (Part No.86965)

Motorcraft – FUEL INJ KIT (Part No.CM-5325)

Dorman – Fuel Injector O-Ring Kit (Part No.904-230)

Motorcraft – FUEL INJ KIT (Part No.CM-5324)

Dorman – FUEL TANK STRAP (Part No.578-705)

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (OE Fix) (Part No.904-229)

Dorman – Fuel Pressure Regulator (Part No.904-239)

Carquest – Fuel Injector (Part No.67528)

Dorman – Diesel Fuel Injector O-ring Kit (Part No.904-207)

Cardone – Fuel Injector (Part No.2J-201)

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20292)

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20152)

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CN-5019-RM)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25072)

Dorman – Fuel Injection Pressure Regulator Seal Kit (Part No.904-415)

Dorman – Fuel Injector O-Ring Kit (Part No.904-230)

Carquest Premium – Fuel Pressure Regulator Upgrade Kit (Part No.AC20382)

Carquest Premium – Fuel Injector Harness (Part No.AC20542)

Carquest Premium – Reman Diesel Fuel Injector – 4 Pack (Part No.AD25072-4PK)

Delphi – Fuel Injector (Part No.EX634763)

Delphi – Fuel Injector (Part No.EX634762)

Delphi – Fuel Injector (Part No.EX634761)

Cardone – Injection Pressure Regulating Valve (Part No.2V-232)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1544)

Carquest Premium – Fuel Injector Sleeve (Part No.AC20252)

Carquest Premium – Heavy Duty Locking Tethered Fuel Tank Cap (Part No.10423)

Carquest Premium – HD Fuel Cap (Part No.10613)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7525)

Carquest Premium – Fuel/Water Separator: Quality Removal of Water and Contaminants from Fuel System (Part No.86604)

Carquest Premium – Fuel/Water Separator: Quality Removal of Water and Contaminants from Fuel System (Part No.86408)