2006 Ford F-150 Clutch Systems
More 2006 Ford F-150 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 2006 Ford F-150, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 2006 Ford F-150 Clutch Systems
ATP – Automatic Transmission Flex Plate (Part No.Z-107)
from
$58.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Sfi Flexplate:Ford 57-Up 332-428: 429-46 (Part No.12-049)
from
$178.99
Sfi Flexplate:Ford 57-Up 332-428: 429-46
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-506)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$26.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65662)
National – Bearings (Part No.FC-65662)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.FC-68329)
from
$16.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – 1 In Under Head Length, 10 Mm X 1.0 Thread Strength, Black Oxide, Chrome Moly (Part No.254-2801)
from
$49.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. that is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- 1-PC Rear Main Seal
- M10 X 1.0 Thread Size
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
LuK – Clutch Slave Cylinder (Part No.LSC003B)
from
$77.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Slave Cylinder (Part No.LSC147)
from
$55.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Slave Cylinder (Part No.I3010836231LUK)
from
$99.06
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS038)
from
$169.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More
LuK – Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-033)
from
$147.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-065)
from
$196.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-031)
from
$147.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.CSPD44)
from
$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
LuK – Clutch Master Cylinder (Part No.LMC167)
from
$55.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Master Cylinder (Part No.LMC359)
from
$73.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000835944LUK)
from
$69.46
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LUK – Clutch Master Cylinder (Part No.I3000836061LUK)
from
$91.62
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Popular 2006 Ford F-150 Clutch Systems Categories
2006 Ford F-150 Clutch Systems
You count on your 2006 Ford F-150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 23 Clutch Systems ranging in price from $9.29 to $346.51, you’re sure to find everything you need for your 2006 Ford F-150.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 7 different brands like LuK, ATP, and National. 2006 Ford F-150 Clutch Systems start as low as $9.29!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 148 extensive product reviews on 2006 Ford F-150 Clutch Systems. Some of the top-rated Clutch Systems products we carry are Bearings with 5.0 stars and Manual Transmission Flywheel Ring Gear with 5.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 2006 Ford F-150 below to get started!
Top-Rated Clutch Systems Brands For Your 2006 Ford F-150
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Ford F-150 running right for years to come. In our inventory you’ll find brands like LuK, ATP, National, and even more.
Popular Driveworks Clutch Systems
You’ll find popular Driveworks brand products across Clutch Pilot Bearings. All are waiting to get your 2006 Ford F-150 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated ATP Clutch Systems
If ATP are what you’re looking for, our inventory holds plenty. We stock ATP brand Clutch Systems for your 2006 Ford F-150, and some of our most reviewed ATP parts include:
FAQs for 2006 Ford F-150 Clutch Systems
What are the most purchased Clutch Systems for the 2006 Ford F-150?
Out of 23 Clutch Systems for the 2006 Ford F-150, the most popular in our inventory are:
What are the top-rated 2006 Ford F-150 Clutch Systems?
Top-rated Clutch Systems for your 2006 Ford F-150 based on customer reviews/ratings are:
from
$14.79
(7)
Bearings
“inner spindle bearing for dana 35.direct fit. no issues.goes in nice n snug.”
from
$99.06
(1)
Clutch Slave Cylinder
“This slave cylinder does not work for a 1990 f150. It is meant to be used for the next generation of f150s. The connection for the master cylinder lin”
