2006 Ford E-150 Econoline Air Intakes
Find Your Specific 2006 Ford E-150 Econoline Air Intakes
Below you will find various in-demand Ford Air Intakes, components and accessories for your 2006 E-150 Econoline. Advance Auto Parts has popular E-150 Econoline parts like Intake Manifold Parts, Carburetor Kits, Throttle Body Parts and more. You’ll also find aftermarket and OEM Air Intakes for other E-150 Econoline model years including
1994,
1995,
1996,
1997,
1998,
1999,
2000,
2001,
2002 and more. Select a category of 2006 Ford E-150 Econoline Air Intakes below and start saving instantly.
Popular 2006 Ford E-150 Econoline Air Intakes Categories
Essential Air Intakes for 2006 Ford E-150 Econolines
Dorman – Throttle Body Motor (Part No.911-102)
from
$242.99
This throttle body motor is engineered to match the fit, function and performance of the original motor to help restore proper throttle response and engine idling on specified vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this electronic throttle body motor is engineered to match the fit, function and performance of the original throttle body motor on specified vehicle years, makes and models
- Restores functionality – designed to help restore proper electronic throttle response when the original motor has failed due to internal component damage, leaks or corrosion
- Durable construction – this motor is made from quality materials and components for reliable service
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
NTK – Throttle Position Sensor (Part No.TH0262)
from
$157.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Carquest Premium – Throttle Position Sensor (Part No.ECC1019)
from
$43.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Throttle Position Sensor (Part No.ECC1111)
from
$67.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
from
$47.99
Product Features:
See More
- The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
- The kit comes with the necessary components to rebuild a 4160 style Carburetor.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G2101)
from
$35.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1910)
from
$69.99
Product Features:
See More
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)
from
$8.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Holley EFI – KIT; FORD 351W HI-RAM; 105MM EFI BLACK (Part No.300-242BK)
from
$1400.99
KIT; FORD 351W HI-RAM; 105MM EFI BLACK
Edelbrock – Performer 351-W Intake Manifold for S/B Ford 351 Windsor (Part No.2181)
from
$402.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Stock Replacement
- 50-State Street Legal
Dorman – Lower Aluminum Intake Manifold (Part No.615-270)
from
$851.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-278)
from
$451.99
Re-engineered by Dorman using innovative plastic technology, our Engine Intake Manifold is lighter than the original aluminum design – and easier to install. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Includes all essential components for a complete repair.
Product Features:
See More
Product Features:
- Available as a complete assembly with fully integrated gaskets for a hassle-free replacement
- Uniquely designed with heat-resistant molding to reduce both warping and coolant leaks
- Features a reinforced aluminum coolant crossover to eliminate corrosion and vibration
- Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 94951)
from
$32.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98011 T-3)
from
$116.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 92121-2)
from
$73.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Victor Reinz – Engine Intake Manifold Gasket Set (Part No.11-10279-01)
from
$94.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
- It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
Carquest – Exhaust Gas Recirculation (EGR) Sensor Connector (Part No.PT771)
from
$19.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Multi-Use Connector (Part No.PTA1279)
from
$17.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1571)
from
$55.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61052)
from
$4.29
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.ES 70582)
from
$15.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Carburetor Mounting Gasket (Part No.60716)
from
$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Electronic Throttle Body (OE Fix) (Part No.977-160)
from
$245.99
Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – THROTTLE BODY UNIT (Part No.977-815)
from
$249.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the throttle body. This 100% new throttle body is designed to match the fit and function of the original equipment throttle body on specified Ford vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this 100% new mechanical throttle body is designed to match the fit and function of the original equipment throttle body on specified Ford vehicles
- Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and rough idling
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Hitachi – Fuel Injection Throttle Body (Part No.ETB0042)
from
$249.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- 100% NEW, never remanufactured
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Powerful electric motor provides quick and accurate response for optimal engine efficiency
- Electronics are sealed to prevent contamination that may result in inaccurate readings
- Detailed manufacturing tracking system using QR codes
Tech Smart – Fuel Injection Throttle Body (Part No.S20020)
from
$270.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.
Product Features:
See More
Product Features:
- 100% NEW, never remanufactured, which maximizes performance and extends service life
- Undergoes extensive testing to ensure quality and reliability out of the box
- Matches OE response time for peak performance on drive by wire systems
- All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
Upgrade your 2006 Ford E-150 Econoline with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2006 Ford E-150 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Air Intakes are key to keeping your E-150 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Air Intakes for the 2006 Ford E-150 Econoline, designed to meet your needs without breaking the bank.
From
Intake Manifold Part
replacements to
Carburetor Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2006 Ford E-150 Econoline at great prices.
Our Air Intakes inventory for this model
ranges from just $5.49 to $451.99, with
an average price of $144.03.
Our 20 Air Intakes in stock come from 9 trusted brands, so you’re sure to find the right part for your 2006 Ford E-150 Econoline without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford E-150 Econoline, we stock popular OEM and aftermarket Air Intakes from top names
like Felpro, Dorman, Tech Smart, and more.
Felpro Air Intakes
start at just $5.49 and boast an impressive 4.6 stars average rating from customers.
Dorman and Tech Smart also bring quality to the table, with Air Intakes available starting at $61.99, and at an average 4.2 stars rating.
With 188 customer reviews and counting, our 2006 Ford E-150 Econoline Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Ford E-150 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-150 Econoline in top shape, all in one place.
Start shopping confidently below for your 2006 Ford E-150 Econoline!
Best-Selling Intake Manifold Parts for 2006 Ford E-150 Econolines
Enhance the driving experience in your Ford with 9 quality Intake Manifold Part components, starting at $55.99.
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96281-1)
from
$77.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Upper Intake Manifold Gasket Set: 15 Piece Set (Part No.615-188G)
from
$63.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Lower & Upper Intake Manifold Gasket Set: 14 Piece Set (Part No.615-702)
from
$61.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96281)
from
$57.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-188)
from
$244.99
If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines
- Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction
- Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
- Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws
Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-278)
from
$451.99
Re-engineered by Dorman using innovative plastic technology, our Engine Intake Manifold is lighter than the original aluminum design – and easier to install. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Includes all essential components for a complete repair.
Product Features:
See More
Product Features:
- Available as a complete assembly with fully integrated gaskets for a hassle-free replacement
- Uniquely designed with heat-resistant molding to reduce both warping and coolant leaks
- Features a reinforced aluminum coolant crossover to eliminate corrosion and vibration
- Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)
Dorman – Upper Intake Manifold Gasket Set: 14 Piece Set (Part No.615-278G)
from
$61.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autotecnica – Intake Manifold (Part No.FD1414328)
from
$298.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
Product Features:
See More
Product Features:
- Guaranteed fitment
Victor Reinz – Engine Intake Manifold Gasket Set (Part No.11-10583-01)
from
$55.99
Withstanding harsh environments, while sealing fuel, air, coolant, and oil, is the challenging task for intake manifold gaskets. Victor Reinz product coverage includes upper manifold (plenum) gaskets, lower intake manifold gaskets and additional gaskets and seals as required. Victor Reinz engineers choose from the worlds broadest range of gasket materials and constructions, and select the best design for the specific engine, whether it is import, domestic, heavy cast iron or lightweight aluminum.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Longer service intervals and Organic Acid Technology coolants place additional burdens on molded intake manifold gaskets. Victor Reinz offers maximum durability and steel carrier gasket designs for severe applications.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
Most Popular 2006 Ford E-150 Econoline Carburetor Kits
Customize your Ford with 1 Carburetor Kits products
like Carburetor and Injector Seal Kits, all
priced under $8.99.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)
from
$8.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Top Picks for 2006 Ford E-150 Econoline Throttle Body Parts
Upgrade Ford E-150 Econolines with top-quality Throttle Body Parts parts, including 3 OEM and aftermarket selections for your 2006 model.
Tech Smart – Fuel Injection Throttle Body (Part No.S20020)
from
$270.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.
Product Features:
See More
Product Features:
- 100% NEW, never remanufactured, which maximizes performance and extends service life
- Undergoes extensive testing to ensure quality and reliability out of the box
- Matches OE response time for peak performance on drive by wire systems
- All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
Hitachi – Fuel Injection Throttle Body (Part No.ETB0042)
from
$249.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- 100% NEW, never remanufactured
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Powerful electric motor provides quick and accurate response for optimal engine efficiency
- Electronics are sealed to prevent contamination that may result in inaccurate readings
- Detailed manufacturing tracking system using QR codes
Dorman – Electronic Throttle Body (OE Fix) (Part No.977-160)
from
$245.99
Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
In-Demand Throttle Bodies & Carb Parts for 2006 Ford E-150 Econolines
Select from 7 premium Throttle Bodies & Carb Parts parts for your 2006 Ford E-150 Econoline, with prices ranging from $5.49 to $242.99.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61048)
from
$7.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Throttle Body Motor (Part No.911-102)
from
$242.99
This throttle body motor is engineered to match the fit, function and performance of the original motor to help restore proper throttle response and engine idling on specified vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this electronic throttle body motor is engineered to match the fit, function and performance of the original throttle body motor on specified vehicle years, makes and models
- Restores functionality – designed to help restore proper electronic throttle response when the original motor has failed due to internal component damage, leaks or corrosion
- Durable construction – this motor is made from quality materials and components for reliable service
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Throttle Position Sensor with Hardware (Part No.ECC1014)
from
$82.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Motorcraft – Original Equipment (O.E.) Potentiometer – Engine Throttle (Part No.DY-1164)
from
$139.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Product Features:
See More
Product Features:
- Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
- The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
- The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
- Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
- Designed for long service life under harsh under-hood conditions.
- Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
- Designed with OE electrical connectors ensuring proper fits.
NTK – Throttle Position Sensor (Part No.TH0262)
from
$157.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
Carquest Premium – Multi-Use Connector (Part No.PTA1571)
from
$55.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Top-Rated Air Intakes Brands For Your 2006 Ford E-150 Econoline
Shop for the best-rated brands offering Air Intakes and other products for your 2006 Ford E-150 Econolines. Below you’ll find some of our best rated Air Intakes from Felpro, Dorman, and Tech Smart, and more. Air Intakes from these brands that fit a 2006 E-150 Econoline start at just $5.49 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 2006 Ford E-150 Econoline Air Intakes
When it comes to maintaining or upgrading your 2006 Ford E-150 Econoline, using quality Air Intakes is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Air Intakes, specifically designed for the 2006 Ford E-150 Econoline. With over 3 Felpro brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.49, with an average price of just $30.32. Plus, with over 13 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 2006 Ford E-150 Econoline Air Intakes
Dorman auto parts is one of the highest quality Air Intake brands in the market. Any 2006 Ford E-150 Econoline owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2006 E-150 Econoline, Advance Auto Parts carries a full inventory of 3 Dorman Air Intakes. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Air Intakes range from $61.99 to $244.99, plus, with more than 30 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$244.99
(27)
Plastic Intake Manifold – Includes Gaskets
“Not what i was expecting to find after opening the box it was in. This intake manifold is a little different from the OEM.
The original intake develo”
FAQs for 2006 Ford E-150 Econoline Air Intakes
Which Air Intakes are best-sellers for 2006 Ford E-150 Econolines?
Out of 20 Air Intakes that fit 2006 Ford E-150 Econolines, the following parts are the top sellers:
- Plastic Intake Manifold – Includes Gaskets (10016210) – $244.99
- Fuel Injector Seal Kit (11450392) – $8.99
- Throttle Position Sensor with Hardware (12424476) – $82.99
What’s the price range for 2006 Ford E-150 Econoline Air Intakes?
Air Intake prices for the 2006 Ford E-150 Econoline start at $5.49 and go up to $451.99 for the most premium parts.
What’s the average price of a Air Intake for a 2006 Ford E-150 Econoline?
The average price for Air Intakes for the 2006 Ford E-150 Econoline is $144.03. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Ford E-150 Econoline model years?
What are the cheapest Air Intakes for my 2006 Ford E-150 Econoline?
The cheapest 2006 Ford E-150 Econoline Air Intakes we carry in stock are:
- Fuel Injection Throttle Body Mounting Gasket (15780644) – $5.49
- Fuel Injection Throttle Body Mounting Gasket (15780625) – $7.49
- Fuel Injector Seal Kit (11450392) – $8.99
- Multi-Use Connector (12443059) – $55.99
- Engine Intake Manifold Gasket Set (12577017) – $55.99
What are the top-rated Air Intakes that fit the 2006 Ford E-150 Econoline?
Out of 188 reviews by customers, our 2006 Ford E-150 Econoline Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2006 Ford E-150 Econoline and their top-rated products:
- Intake Manifold Parts
- Lower & Upper Intake Manifold Gasket Set: 14 Piece Set (10286662) – $61.99
- Upper Intake Manifold Gasket Set: 15 Piece Set (10055016) – $63.99
- INTAKE MANIFOLD GASKET SET (20688190) – $77.99
- Throttle Body Parts
- Lower & Upper Intake Manifold Gasket Set: 14 Piece Set (10286662) – $61.99
- Upper Intake Manifold Gasket Set: 15 Piece Set (10055016) – $63.99
- INTAKE MANIFOLD GASKET SET (20688190) – $77.99
- Throttle Bodies & Carb Parts
- Lower & Upper Intake Manifold Gasket Set: 14 Piece Set (10286662) – $61.99
- Upper Intake Manifold Gasket Set: 15 Piece Set (10055016) – $63.99
- INTAKE MANIFOLD GASKET SET (20688190) – $77.99
What types of Air Intakes do you sell for my 2006 Ford E-150 Econoline?
As of 3/1/26, these are some of the most in-demand types of Air Intakes for a 2006 Ford E-150 Econoline:
Can I get help with 2006 Ford E-150 Econoline Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Air Intakes and more.
What is your return policy for Ford E-150 Econoline Air Intakes?
Advance Auto Parts keeps returns simple. For new Ford E-150 Econoline Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
