2006 Dodge Ram 2500 Drive Shafts and Axles
More 2006 Dodge Ram 2500 Drive Shafts and Axles
Find your specific 2006 Dodge Ram 2500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Dodge Ram 2500 Drive Shafts and Axles
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-162)
from
$673.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-709)
from
$955.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – 1541H Replacement Outer Stub Axle Shaft For Dana 60 (Part No.21098)
from
$299.99
Yukon 1541H replacement outer stub axle shaft for Dana 60 with a length of 7.05 inches. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1994-1999 Dodge one ton front
- Outer stub
- 33 spline
- 7.05″ from end of splines to center of u-joint bore
Yukon Gear – Stub Axle (Part No.21838)
from
$289.99
Stub Axle
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Square Pinion Flange For ’03 & Up Chrysler 10.5" & 11.5" – 4 Bolt Design (Part No.41202)
from
$187.99
Yukon square pinion flange for ’03 & up Chrysler 10.5″ & 11.5″. 4 bolt design.
Product Features:
See More
Product Features:
- Fits Chrysler 10.5″ and 11.5″
- 30 spline
- Square flange
- 4 bolt holes
Dorman – Axle Flange Gasket Kit (Part No.926-966)
from
$21.49
Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.
Product Features:
See More
Product Features:
- Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
- Required for routine service – this gasket should be replaced every time work is performed at the axle flange
- Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
- Quality tested – this flange gasket has been designed and tested for a guaranteed fit
Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
National – Bearings (Part No.307-FFL5)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)
from
$197.95
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Spicer – U-Joint Kit (Part No.5006813)
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)
from
$52.99
Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Controlled heat treatment process for strength and durability
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- Professional technicians know they can depend on National
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Inner Axle Bearing For Dodge Dana 44 & 60 Disconnect, 1.625" O.D., 0.500" Wide (Part No.18052)
from
$44.99
Product Features:
See More
- Inner axle bearing
- Fits Dana Spicer 44 and 60 with disconnect axles
- 1.625″ O.D.
- 0.500″ wide
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)
from
$47.99
Plug adapter for extra-large clamshell. No Return.
Product Features:
See More
Product Features:
- Plug adapter for Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Replacement Inner Seal For Dana 44 & Dana 60, Quick Disconnect (Part No.30312)
from
$15.99
Replacement inner seal for Dana 44 & Dana 60, quick disconnect (2.290″ OD).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front inner axle seal
- Fits Dodge disconnect front with Dana Spicer 44 or 60
Driveworks – Oil Seal (Part No.S-5131)
from
$9.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Replacement Left Hand Axle Seal For 99-02 Dana 60 Dodge Disconnect (Part No.30317)
from
$48.99
Replacement left hand axle seal for 99-02 Dana 60 Dodge disconnect .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle seal
- Fits 1999-2002 Dodge Dana 60 with vacuum disconnect
- Left hand side
Yukon Gear – Outer Stub Dust Shield For Chrysler 9.25" Front (Part No.33544)
Popular 2006 Dodge Ram 2500 Drive Shafts and Axles Categories
2006 Dodge Ram 2500 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2006 Dodge Ram 2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 49 different Drive Shafts and Axles in our inventory ranging from $9.49 to $1,583.99. That means you can find the exact parts or products you need to keep that 2006 Dodge Ram 2500 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Dodge Ram 2500. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2006 Dodge Ram 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 634 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 1.7 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 3.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2006 Dodge Ram 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2006 Dodge Ram 2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Dodge Ram 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman Drive Shafts and Axles
We carry Dorman parts in our stock across Axle Vents categories, plus more. For a 2006 Dodge Ram 2500, our most popular Dorman Drive Shafts and Axles include:
Top 2006 Dodge Ram 2500 Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 2006 Dodge Ram 2500. Popular National parts include:
FAQs for 2006 Dodge Ram 2500 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2006 Dodge Ram 2500?
Out of 49 Drive Shafts and Axles for the 2006 Dodge Ram 2500, the most popular in our inventory are:
What are the top-rated 2006 Dodge Ram 2500 Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 2006 Dodge Ram 2500 based on customer reviews/ratings are:
from
$111.99
(6)
Center Support Bearing Motor Mount: Center, 1 Piece
“A grease fitting would be great. Bearing is NOT pre greased!!! You have to force grease in through the edges or it will fail…..
That being said,”
from
$92.99
(5)
Center Support Bearing Motor Mount: Center, 1 Piece
“not as beefy as the OEM but fit correctly and works as designed”
