2006 Dodge Magnum Performance and Racing Products
More 2006 Dodge Magnum Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2006 Dodge Magnum, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2006 Dodge Magnum Performance and Racing Products
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.16420)
from
$761.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 16420. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2008-2014 Dodge Challenger, 2006-2014 Dodge Charger, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.16635)
from
$902.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 16635 brings out the personality of your 2.7L, 3.5L 2005-2010 Dodge with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16635 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16635 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Energy Suspension – CntrlArmBshngKt (Part No.5.3141R)
from
$164.99
CntrlArmBshngKt
Energy Suspension – CntrlArmBshngKt (Part No.5.3140G)
from
$221.99
CntrlArmBshngKt
Monroe – Strut-Mate Coil Spring Insulator (Part No.906995)
from
$57.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.71-1542)
from
$399.99
The K&N 71-1542 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces the restrictive factory air filter and air intake housing on some Dodge Challenger/Charger/Magnum and Chrysler 300/300C models. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated tube features a welded, engraved K&N plate giving you a clean, high-performance look under the hood. The intake tube accommodates the factory inlet air temperature sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1542 vehicle applications to determine the legal status for each vehicle.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9935)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
- Product might not be available in all states due to local laws.
Flowmaster Inc. – 40 Delta Muffler 409S – 2.25 Offset In / 2.25 Offset Out – Aggressive Sound (Part No.842443)
from
$125.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – DBX Muffler, 2.5in Center Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12514310)
from
$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
MSD Ignition – Ignition/Timing Control for Late HEMI (Part No.6013)
from
$768.99
These MSD 6-Hemi ignition controllers fire the coils and control the timing on Hemis that are retro-fit with a carburetor or late model factory electronic fuel injection. You program two separate rev limits and have a single-step retard adjustment. The MSD 6-Hemi ignition controllers connect easily, directly to the coils, crankshaft, cam, and MAP sensors for a simple installation. Wiring harnesses for installing on factory EFI engines are sold separately.
Product Features:
See More
Product Features:
- Fires Coils and Controls Timing on Hemis Retro-Tit
- Program two rev limits and a step retard
- Can be used w/Carburetor or factory EFI
- Easily connects directly to coils/crank/cam/MAP sensors
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$390.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Dynomax – Tail Pipe (Part No.55341)
from
$290.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
Dynomax – 55232 Exhaust Tail Pipe (Part No.55232)
from
$236.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.69-2526TP)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$103.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Energy Suspension – SwyBarBshKt (Part No.5.5171R)
from
$23.99
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.5.5173G)
from
$38.99
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.5.5170R)
from
$23.99
SwyBarBshKt
Popular 2006 Dodge Magnum Performance and Racing Products Categories
2006 Dodge Magnum Performance and Racing Products
You count on your 2006 Dodge Magnum to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 34 Performance and Racing Products ranging in price from $17.99 to $902.99, you’re sure to find everything you need for your 2006 Dodge Magnum.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like K&N, Flowmaster Inc., and Bully Dog. 2006 Dodge Magnum Performance and Racing Products start as low as $17.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 662 extensive product reviews on 2006 Dodge Magnum Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Cold Air Intake Kit Engineered to Add Horsepower & Torque with 4.0 stars and 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound with 3.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2006 Dodge Magnum below to get started!
Top-Rated Performance and Racing Products Brands For Your 2006 Dodge Magnum
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Dodge Magnum running right for years to come. In our inventory you’ll find brands like K&N, Flowmaster Inc., Bully Dog, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Intake Kits. All are waiting to get your 2006 Dodge Magnum back on the road. Some of the top-rated K&N products in these categories are:
from
$349.99
(14)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$349.99
(38)
Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$399.99
(10)
Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
Top-Rated K&N Performance and Racing Products
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 2006 Dodge Magnum, and some of our most reviewed K&N parts include:
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$399.99
(14)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits
FAQs for 2006 Dodge Magnum Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2006 Dodge Magnum?
Out of 34 Performance and Racing Products for the 2006 Dodge Magnum, the most popular in our inventory are:
from
$99.99
(2)
40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$113.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
Performance Computer Prom and Chips
What are the top-rated 2006 Dodge Magnum Performance and Racing Products?
Top-rated Performance and Racing Products for your 2006 Dodge Magnum based on customer reviews/ratings are:
from
$199.99
(15)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“Pleasantly surprised by the immediate boost in performance.”
from
$139.99
(1)
50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
“Love the sound,but a baffle came loose inside one of the mufflers after only a couple of years. Now it rattles. Go stainless steel.”
