2006 Chevrolet Tahoe Air Suspension and Kits

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to damage or fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

POWER STEERING FLUID

Quick Strut Kit

Gas Shock

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

• 6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
• Levels Out Factory Rake Not Affecting Your Ride Quality
• Allows For The Use Of Larger Wheel And Tire Combinations
• Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Comes With Everything For A Quick, Easy Installation, Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Suspension Ride Heig

Suspension Ride Heig

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:

• OE matched design for Form, Fit, and Function
• Engineered to reduce road noise and provide a stable ride.
• Hardware included for easier installation (where applicable)

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The highest quality replacement strut mount available
• Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
• Superior rubber reduces noise, vibration and harshness
• Mount bearings provide smoother steering and help retain front end alignment
• Matched grade studs and nuts

Arnott’s new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/Magneride suspension.

Arnott’s new rear shock AS-3066 for 2015-2019 GM trucks and SUVs (K2XX Chassis) equipped with Magneride, is the ideal replacement for your failing rear air assisted shock. This Arnott shock, which was engineered in the USA, includes a passive Eibach monotube damper which has been custom tuned to deliver control, stability, and comfort. Arnott’s new aftermarket rear shock bypasses the vehicle’s auto-damping system and incorporates a sensor which eliminates dash panel error messages.

Shock Kit

Shock Kit

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Shocks

Arnott’s premium rear shock for GM vehicles equipped with air-assisted suspensions is an ideal replacement for a failing rear shock. This top-of-the-line shock, engineered in the USA, delivers control, stability, performance, and comfort. Arnott’s new aftermarket shock connects to the vehicle’s auto-leveling system with no modifications and includes a bypass resistor to turn off dashboard warning lights for the auto-damping control unit. These rear shocks should be replaced in pairs. Not applicable for vehicles w/Magneride suspension.

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

• CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
• COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
• EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
• KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off
• RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride.

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

• CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
• COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
• RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride
• EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
• KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)