2006 Chevrolet Malibu Towing Products

Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:

• 60 in. Long
• Adapts Tow Vehicles Taillight System To The Trailers
• Powers Up To 2.1 Amps Per Output
• Double-Molded Weatherproof Design; Includes Dust Cover
• Corrosion Resistant Terminals
• Includes Splices And Terminal Grease
• Complete With Splices And Circuit Tester

Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microprocessor that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package includes a powered converter wiring kit #55152 and four snap locks for faster, more secure splicing.

Product Features:

• Converts 2-wire, 3-wire or PWM ST system to 2-wire trailer light wiring
• Potted enclosure significantly increases water and vibration resistance
• 4-way flat output connects tail lights, brake lights and turn signals
• Constructed with SMT circuitry for better performance and durability
• Microcontroller senses current to rapidly react to overload
• Provides improved overload, short-circuit and thermal protection
• Low-voltage operation allows function down to seven volts
• Color-coded wires with wiring guide for easier installation
• Included wiring kit allows for a convenient connection to the vehicle battery
• Snap locks included for fast, secure splicing
• Dust cover included to keep connector clean when not in use

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery

Product Features:

• For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
• Protects Tow Vehicle Electronics And Itself From Wiring Shorts
• Self-Resetting
• Includes 12 Ga. Power Lead Wire
• Includes Fuse/Fuse Assembly/Splices/Cable Ties
• Powers Up To 8.0 Amps Per Output
• Receives Power Directly From The Battery
• Includes Vehicle Side 4 Flat
• Includes Dust Cover And Grease Packet To Prevent Corrosion

The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:

• 60 inch length
• Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
• Double-molded weatherproof design
• Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
• Includes 4 wire flat extension
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:

• For vehicles equipped with independent bulb turn signals or common bulb systems
• Protects tow vehicle electronics from wiring shorts
• Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
• Powers up to 5.0 amps per output
• Receives power directly from the battery
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

A CURT trailer hitch is the key to pursuing your passions, whether you’re taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Chevrolet Malibu (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4″ x 1-1/4″ hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4″ trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.

Product Features:

• Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
• Ball mount can be flipped to provide drop or rise for level towing
• Made in USA (may include imported hardware)