2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers
More 2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers
Find your specific 2006 Chevrolet Impala original or aftermarket Crankshaft Pulley and Harmonic Balancers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers
Mr. Gasket – Chrome Plated Steel Crankshaft Pulley (Part No.4978)
from
$98.99
Replace your stock black engine pulleys with a pair of chrome plated steel pulleys from Mr. Gasket. The pulleys are highly polished then chrome plated. Designed for small and big block Chevrolet engines with 5/8 inch water pump shaft.
Product Features:
See More
Product Features:
- Highly Polished For Lasting Beauty
Mr. Gasket – Billet Style Aluminum Crankshaft Pulley (Part No.5317)
from
$103.99
The machined aluminum pulley has been heat treated for strength and has a satin finish.
Product Features:
See More
Product Features:
- Made from aluminum
- Heat treated for strength
- Satin finish for a more subtle hi-tech look than chrome
- Matches water pump pulley #5315
KAI – Crankshaft Pulley (Part No.GMK4012266696)
from
$159.99
New Goodmark 2 Deep Groove Crankshaft Pulley, For Vehicles With Shp Big Block Chevrolet V8 Engines
Product Features:
See More
Product Features:
- For Vehicles With Shp Big Block Chevrolet V8 Engines
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Engine Harmonic Bala (Part No.A2210682662DOR)
from
$88.92
Durable and sleek, Dorman Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. The ductile steel construction allows for improved tensile and impact strength, safeguarding the engine and maintaining fuel efficiency year after year. Dorman Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.
Product Features:
See More
Product Features:
- Includes woodruff key, bolts, and washers for a complete repair (where applicable)
- Direct replacement to ensure proper fit
- Ships with protective sleeve over cone and trigger to prevent damage (where applicable)
Dorman – Harmonic Balancer Assembly (Part No.594-004)
from
$127.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
PowerBond – Race Performance 10% Underdrive Harmonic Balancer; 171.5mm Diameter (Part No.PBU1481SS10)
from
$209.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Street Performance Harmonic Balancer; 202mm Diameter (Part No.PB1050ST)
from
$129.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Street Performance Harmonic Balancer; 202.25mm Diameter (Part No.PB1018ST)
from
$118.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Street Performance Harmonic Balancer; 171.5mm Diameter (Part No.PB2221ST)
from
$108.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
Dorman – Harmonic Balancer Assembly (Part No.594-420)
from
$76.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
PowerBond – Premium OEM Replacement Harmonic Balancer; 203mm Diameter (Part No.PB1150N)
from
$153.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Race Performance Harmonic Balancer; 202mm Diameter (Part No.PB1046SS)
from
$169.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 156mm Diameter (Part No.PB1208N)
from
$69.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 182.1mm Diameter (Part No.PB1461N)
from
$97.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 179mm Diameter (Part No.PB1237N)
from
$92.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
Dorman – Harmonic Balancer Assembly (Part No.594-014)
from
$95.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
PowerBond – Street Performance Harmonic Balancer; 177.25mm Diameter (Part No.PB1019ST)
from
$178.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 203mm Diameter (Part No.PB1201N)
from
$56.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Race Performance 8 Rib Harmonic Balancer; 176.2mm Diameter (Part No.PB81461SS)
from
$252.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Race Performance Harmonic Balancer; 202mm Diameter (Part No.PB1211SS)
from
$207.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 155.4mm Diameter (Part No.PB1012N)
from
$49.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 171.45mm Diameter (Part No.PB1200N)
from
$50.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
Dorman – Harmonic Balancer Assembly (Part No.594-148)
from
$83.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Harmonic Balancer Assembly (Part No.594-563)
from
$219.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
PowerBond – Premium OEM Replacement Harmonic Balancer; 177.65mm Diameter (Part No.PB1019N)
from
$111.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 203mm Diameter (Part No.PB1211N)
from
$82.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
PowerBond – Premium OEM Replacement Harmonic Balancer; 203mm Diameter (Part No.PB1018N)
from
$62.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
Dorman – Harmonic Balancer Assembly (Part No.594-710)
from
$49.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Popular 2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers Categories
2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers
Maybe you’re in the middle of a full rebuild of that 2006 Chevrolet Impala. Maybe you just need a couple of Crankshaft Pulley and Harmonic Balancers. Either way, Advance Auto Parts has 5 different Crankshaft Pulley and Harmonic Balancers in our inventory ranging from $88.92 to $219.99. That means you can find the exact parts or products you need to keep that 2006 Chevrolet Impala running smoothly.
Crankshaft Pulley and Harmonic Balancers are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Chevrolet Impala. Dorman, GM Genuine, and PowerBond are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Crankshaft Pulley and Harmonic Balancers for your 2006 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Crankshaft Pulley and Harmonic Balancers to keep your 2006 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Crankshaft Pulley and Harmonic Balancers Brands To Make Your 2006 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Crankshaft Pulley and Harmonic Balancers make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Crankshaft Pulley and Harmonic Balancers brands and parts.
Popular PowerBond Crankshaft Pulley and Harmonic Balancers
We carry PowerBond parts in our stock across Harmonic Balancers categories, plus more. For a 2006 Chevrolet Impala, our most popular PowerBond Crankshaft Pulley and Harmonic Balancers include:
FAQs for 2006 Chevrolet Impala Crankshaft Pulley and Harmonic Balancers
What are the most purchased Crankshaft Pulley and Harmonic Balancers for the 2006 Chevrolet Impala?
Out of 5 Crankshaft Pulley and Harmonic Balancers for the 2006 Chevrolet Impala, the most popular in our inventory are:
