from

$16.57

Air Conditioning O-Ring Kit

from

$149.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$18.99

New Standard Replacement A/C System Seal Kit, MT2550, L4 Engine

Product Features:

MT2550, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$13.13

A/C Service Valve

from

$24.29

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest Premium electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$101.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$481.99

As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$102.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$28.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$223.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$4.49

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$11.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$265.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
vibration testing
blast testing
and salt spray testing to simulate real world conditions.

from

$32.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$8.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$311.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$36.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Improved 2 terminal design replacing older 1 terminal switch

from

$80.40

A/C Pressure Switch

from

$51.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$8.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$7.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$172.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
vibration testing
blast testing
and salt spray testing to simulate real world conditions.

from

$198.00

Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:

Zinc diffusion layer improves corrosion resistance
Unique fin design to minimize airflow blockage
High performance design reduces the required compressor power
System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
Engineered to Perfection: OE quality engineered for unparalleled performance
Exact Fit: Condensers install with speed and ease
Reduces required compressor power, resulting improved fuel economy
Restores A/C performance to as-new condition
First Time Fit® assures bolt-in replacement; no brackets or adapters
Greater Durability: Pure aluminum construction provides greater resistance for corrosion

from

$176.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
vibration testing
blast testing
and salt spray testing to simulate real world conditions.