2006 Chevrolet HHR Suspension Parts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Protects spring and spring seat from damage
• Replacement helps to reduce noise

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Reduces road noise
• Reduces vibration
• UV resistant

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:

• Restores OE performance
• One way anti-foaming valve reduces foaming and performance fade
• Three stage dual valving
• Teflon coated piston valve
• Seamless inner cylinder and eye ring, no leaks
• Bonded bushings and sleeves
• Hard chromed piston rod

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

STRUT BELLOW

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Engineered to meet or exceed OE requirements
• Superior rubber to steel bonding for durability
• High polish chrome steel bearing races
• Replacement helps restore vehicle handling
• Includes new spring seat insulator and installation hardware to eliminate noise issues
• Electroplate and corrosion-resistant coating to help prevent galvanic corrosion

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

• Strut Mount
• Bearing
• Upper Spring Isolator
• Lower Spring Isolator
• Upper Spring Seat

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Reduces road noise
• UV resistant
• No Squeak

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Engineered to meet or exceed OE requirements
• Incorporates proven design and engineering features

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

• Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
• Poly Foam Bumper Prevents The Strut From Bottoming Out
• Built With Design And Quality That Matches Or Exceeds One
• Protects The Upper Seal And Bushing

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

• QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
• RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
• VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
• OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
• MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
• MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
• IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
• RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
• ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

Complete Strut Assem

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• KYB Recommended Orem Replacement Shock
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Gm Car
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

• QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
• GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
• EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
• CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
• COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs