2006 Chevrolet Corvette Air Intakes
Find Your Specific 2006 Chevrolet Corvette Air Intakes
Below you will find various in-demand Chevrolet Air Intakes, components and accessories for your 2006 Corvette. Advance Auto Parts has popular Corvette parts like Intake Manifold Parts, Airboxes, Throttle Body Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Corvette model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2006 Chevrolet Corvette Air Intakes below and start saving instantly.
Popular 2006 Chevrolet Corvette Air Intakes Categories
Essential Air Intakes for 2006 Chevrolet Corvettes
Dorman – Electronic Throttle Body: New (Part No.977-316)
from
$201.99
Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.217-3151)
from
$363.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Electronic Throttle Body (OE Fix) (Part No.977-376)
from
$234.99
Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Electronic Throttle Body (OE Fix) (Part No.977-804)
from
$225.99
Product Features:
See More
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61436)
from
$10.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Weiand – Hi-Ram; Intake Manifold (Part No.1981)
from
$665.99Product Features:
- Square Flange Carburetor Mounting
- Special D-Shaped Port Runner Design
- Large Plenum Chamber
Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)
from
$395.99Product Features:
- Based on Performer Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg .Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Fits Both Spread and Square Bore Carburetors
- Also in Polished/PermaStar/EnduraShine Finish
Weiand – Stealth; Intake Manifold (Part No.8019)
from
$439.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Holley – LS Carbureted Manifold 2×4 Dual Plane LS3/L92 (Part No.300-133)
from
$645.99
Product Features:
See More
- Power band from 1500-7000rpm
- Perfect for any street/performance, muscle car or street rod enthusiast
- Cast aluminum construction
- Fits all GM LS Gen III or Gen IV engines equipped with LS3/L92 style rectangular port cylinder heads.
- Dual plane design for equal distribution and great mid-range torque without comprimising top-end power
MSD Ignition – Atomic; AirForce; LT1; Intake Manifold (Part No.2700)
from
$1700.99
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Product Features:
See More
Product Features:
- Dyno Proven Bolt On Power
- Runner Layout And Plenum Design Promotes Max Airflow
- 2 Piece Design Easy Access To Runners
- Glass Reinforced Composite Resists Heat Soak
- Accepts OEM and Aftermarket Throttle Bodies
- Equipped w/Port Injector Bosses
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90240)
from
$24.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 92438)
from
$35.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.100)
from
$42.99
Mr. Gasket Performance Series intake gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals & distributor gaskets if applicable
- For OE replacement, high performance street, drag race and oval track use
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90314-3)
from
$22.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)
from
$20.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10506-01)
from
$54.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Longer service intervals and Organic Acid Technology coolants place additional burdens on molded intake manifold gaskets. Victor Reinz offers maximum durability and steel carrier gasket designs for severe applications.
Carquest Premium – Multi-Use Connector (Part No.PTA1357)
from
$51.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Drive Type Rivet (Part No.963-208D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Upgrade your 2006 Chevrolet Corvette with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2006 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Air Intakes for the 2006 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Intake Manifold Part
replacements to
Airboxes
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2006 Chevrolet Corvette at great prices.
Our Air Intakes inventory for this model
ranges from just $4.99 to $1,972.99, with
an average price of $450.08.
Our 17 Air Intakes in stock come from 7 trusted brands, so you’re sure to find the right part for your 2006 Chevrolet Corvette without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 2006 Chevrolet Corvette!
Best-Selling Intake Manifold Parts for 2006 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 11 quality Intake Manifold Part components, starting at $42.99.
MSD Ignition – Atomic; AirForce; LS1; 2; 6; Intake Manifold (Part No.2702)
from
$1400.99
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Product Features:
See More
Product Features:
- Polymer Material Resists Heat Soak
- 103mm Throttle Bore For Greater Air Flow
- Direct Flow Path Runner Design
- Allows For The Use Of Stock Fuel Rails
Edelbrock – RPM Dual-Quad manifold and carb Kit for Big-Block Chevy Oval-Port (Part No.2065)
from
$1972.99
Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Convert From Single To Dual-Quad Intake
- Produces Incredible Top-End Horsepower
- Edelbrock Total Power Package Maximizes Gains
MSD Ignition – Atomic; AirForce; LS7; Intake Manifold (Part No.2701)
from
$1450.99
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Product Features:
See More
Product Features:
- Polymer Material Resists Heat Soak
- 103mm Throttle Bore For Greater Air Flow
- Direct Flow Path Runner Design
- Allows For The Use Of Stock Fuel Rails
Edelbrock – Single-Quad Manifold And Carb Kit For Big-Block Chevy Oval Port (Part No.2063)
from
$1141.99
The Edelbrock No. 2063 Single-Quad Manifold and carb kit is designed for Big-Block Chevy Oval Port applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits include: an Edelbrock manifold, Performer or Thunder Series AVS carb, chrome fuel inlet, intake gasket set, intake bolt set and carb stud kit. The manifold and carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.
See More
Edelbrock – POWER PKG (Part No.2061)
from
$1062.99
POWER PKG
Edelbrock – Pro-Flo XT Small Block Chevy LS2 EFI Black Intake Manifold (Part No.71403)
from
$865.99
Edelbrock part #71403 Pro-Flo XT LS2 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features include a 90mm throttle bore opening and
Product Features:
See More
Product Features:
- 1500-7000 RPM Range
- Single Plane Type-Throttle Body XT Style Flange
- 10.2 in. Front Height, 10.2 in. Center Height, 10 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Holley – Dual Plane Intake – GM LS1/LS2/LS6 – Black (Part No.300-130BK)
from
$589.99
Product Features:
See More
- 1500-6500 RPM power band
- 4150 Square bore flange
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 1500-6500 RPM
- Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
- Great for carbureted or throttle body EFI street applications
- Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
- Weighs 15.14 lbs.
- Height (front) – 5.07″ from front lifter valley cover to carb mounting flange
- Height (rear) – 6.14″ from rear lifter valley cover to carb mounting flange
- Port size – 2.72″ height x 1″ wide
- Mounting flange gasket type – O-ring
- Includes Viton O-rings – Viton is a registered trademark of DuPont Performance Elastomers
Holley – Single Plane Intake – GM LS1/LS2/LS6 (Part No.300-132)
from
$467.99
Product Features:
See More
- 2500-7000 RPM power band
- 4150 Square bore carb mounting flange (accepts up to 1.75″ diameter throttle bores)
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 2500-7000 RPM
- Minimum carb flange height – fits in vehicles with minimum hood modifications
- Cast aluminum construction – great manifold for centrifugal blower, turbocharged or NOS power adder applications
- Efficient casting design – lightweight, consistent wall thicknesses, improved casting quality
- Weight – 11.5 lbs.
- Height (front) – 4.95″ to the lifter valley cover flange at the engine block front flange
- Port size – 2.659″ height x .918″ wide
- Includes Viton intake to cylinder head O-ring gaskets – Viton is a registered trademark of DuPont Performance Elastomers
Holley – Dual Plane Intake – GM LS1/LS2/LS6 (Part No.300-130)
from
$467.99
Product Features:
See More
- 1500-6500 RPM power band
- 4150 Square bore flange
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 1500-6500 RPM
- Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
- Great for carbureted or throttle body EFI street applications
- Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
- Weighs 15.14 lbs.
- Height (front) – 5.07″ from front lifter valley cover to carb mounting flange
- Height (rear) – 6.14″ from rear lifter valley cover to carb mounting flange
- Port size – 2.72″ height x 1″ wide
- Mounting flange gasket type – O-ring
- Includes Viton O-rings – Viton is a registered trademark of DuPont Performance Elastomers
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97396)
from
$57.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Included all parts needed to complete the repair
Mr. Gasket – Gaskets (Part No.61050G)
from
$42.99
Set of eight intake seals for original equipment style heads with cathedral ports.
Product Features:
See More
Product Features:
- OEM Style Molded O-Ring Style Gaskets
- Replaces GM # 12533587
Most Popular 2006 Chevrolet Corvette Airboxes
Customize your Chevrolet with 3 Airboxes products
like Engine Air Duct Rivet, all
priced under $4.99.
Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Drive Type Rivet (Part No.963-208D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Top Picks for 2006 Chevrolet Corvette Throttle Body Parts
Upgrade Chevrolet Corvettes with top-quality Throttle Body Parts parts, including 1 OEM and aftermarket selections for your 2006 model.
Dorman – Electronic Throttle Body: New (Part No.977-820)
from
$336.99
Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
In-Demand Throttle Bodies & Carb Parts for 2006 Chevrolet Corvettes
Select from 2 premium Throttle Bodies & Carb Parts parts for your 2006 Chevrolet Corvette, with prices ranging from $10.49 to $51.99.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61436)
from
$10.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Multi-Use Connector (Part No.PTA1357)
from
$51.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
FAQs for 2006 Chevrolet Corvette Air Intakes
Which Air Intakes are best-sellers for 2006 Chevrolet Corvettes?
Out of 17 Air Intakes that fit 2006 Chevrolet Corvettes, the following parts are the top sellers:
- Nylon Nut – 1/4 In. (No.14) (11911189) – $4.99
- Drive Type Rivet (11910867) – $4.99
- Multi-Use Connector (12461416) – $51.99
What’s the price range for 2006 Chevrolet Corvette Air Intakes?
Air Intake prices for the 2006 Chevrolet Corvette start at $4.99 and go up to $1,972.99 for the most premium parts.
What’s the average price of a Air Intake for a 2006 Chevrolet Corvette?
The average price for Air Intakes for the 2006 Chevrolet Corvette is $450.08. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Chevrolet Corvette model years?
What are the cheapest Air Intakes for my 2006 Chevrolet Corvette?
The cheapest 2006 Chevrolet Corvette Air Intakes we carry in stock are:
- Nylon Nut – 1/4 In. (No.14) (11911189) – $4.99
- Drive Type Rivet (11910867) – $4.99
- Push-Type Rocker and Fender Liner Retainer – 3/8 In. Hole (12580470) – $4.99
- Fuel Injection Throttle Body Mounting Gasket (21021854) – $10.49
- Gaskets (12225900) – $42.99
What are the top-rated Air Intakes that fit the 2006 Chevrolet Corvette?
Out of 2 reviews by customers, our 2006 Chevrolet Corvette Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2006 Chevrolet Corvette and their top-rated products:
- Throttle Bodies & Carb Parts
- Fuel Injection Throttle Body Mounting Gasket (21021854) – $10.49
What types of Air Intakes do you sell for my 2006 Chevrolet Corvette?
As of 3/1/26, these are some of the most in-demand types of Air Intakes for a 2006 Chevrolet Corvette:
Can I get help with 2006 Chevrolet Corvette Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.
What is your return policy for Chevrolet Corvette Air Intakes?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
