2006 Chevrolet Cobalt Power Steering Parts
More 2006 Chevrolet Cobalt Power Steering Parts
Find your specific 2006 Chevrolet Cobalt original or aftermarket Power Steering Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Chevrolet Cobalt Power Steering Parts
Rare Parts – R & P BELLOWS (Part No.RP57359)
from
$14.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
EMPI – re Steering Rack Boot (Part No.M10101317635EMP)
from
$16.11
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Cardone – Power Steering Assist Motor (Part No.1C-18010M)
from
$135.99
CARDONE Remanufactured Power Steering Assist Motor Modules are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Each unit is built and calibrated to O.E.M. electronic and electrical specifications
- Every unit is 100% computer tested to ensure O.E.M. performance
- Vehicle diagnostic codes are specific to each component
- Built to meet or exceed O.E.M. performance
- Designed for easy installation and setup
Cardone – Rack and Pinion Assembly (Part No.1G-1815)
from
$214.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.1G-1811)
from
$344.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Electronic Rack and Pinion {Complete} – Domestic (Part No.23-1815)
from
$169.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Cardone – Electronic Rack and Pinion {Complete} – Domestic (Part No.23-1811)
from
$314.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
PWR – New Manual Rack and Pinion (Part No.45-1169)
from
$601.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), and Installation Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Carquest Premium – HVAC Control Connector (Part No.PTA2321)
from
$152.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Inline Connector (Part No.PTA2373)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Air Bag Connector (Part No.PTA2152)
from
$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Cardone – P/S Assist Motor/ Mo (Part No.M2103901535CAR)
from
$115.46
Cardone Remanufactured Power Steering Assist Motor Modules are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.
Product Features:
See More
Product Features:
- 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function
- All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability
- All units are built with 100% new seals and o-rings
- Units are supplied with 100% tested and calibrated pressure relief valves
- Shafts are 100% processed to ensure surface finish is within O.E. tolerances
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Popular 2006 Chevrolet Cobalt Power Steering Parts Categories
2006 Chevrolet Cobalt Power Steering Parts
Maybe you’re in the middle of a full rebuild of that 2006 Chevrolet Cobalt. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 17 different Power Steering Parts in our inventory ranging from $11.49 to $601.99. That means you can find the exact parts or products you need to keep that 2006 Chevrolet Cobalt running smoothly.
Power Steering Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Chevrolet Cobalt. Imperial, Cardone, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Power Steering Parts for your 2006 Chevrolet Cobalt, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,060 reviews in this category, some of the top rated parts include Electronic Rack and Pinion {Complete} – Domestic with 5.0 stars and Transmission Oil Cooler Replacement Hose with 3.0 stars.
So if you’re in the market for aftermarket Power Steering Parts to keep your 2006 Chevrolet Cobalt rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Power Steering Parts Brands To Make Your 2006 Chevrolet Cobalt Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Chevrolet Cobalt demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Cobalt the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.
Popular Imperial Power Steering Parts
We carry Imperial parts in our stock across Power Steering Coolers and Power Steering Pressure Hoses categories, plus more. For a 2006 Chevrolet Cobalt, our most popular Imperial Power Steering Parts include:
Top 2006 Chevrolet Cobalt Power Steering Parts from Imperial
Imperial products are another trusted brand when it comes to Power Steering Parts for your 2006 Chevrolet Cobalt. Popular Imperial parts include:
FAQs for 2006 Chevrolet Cobalt Power Steering Parts
What are the most purchased Power Steering Parts for the 2006 Chevrolet Cobalt?
Out of 17 Power Steering Parts for the 2006 Chevrolet Cobalt, the most popular in our inventory are:
What are the top-rated 2006 Chevrolet Cobalt Power Steering Parts?
Top-rated Power Steering Parts for your 2006 Chevrolet Cobalt based on customer reviews/ratings are:
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
