2006 Chevrolet C4500 Kodiak Differentials

Essential 2006 Chevrolet C4500 Kodiak Differentials

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana S135 With 36 Spline Axles (Part No.16136)

Replacement Standard Open Spider Gear Kit For Dana S135 With 36 Spline Axles

from

$872.99
Yukon replacement standard open spider gear kit for Dana S135 with 36 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer S135 open differential
  • Includes two side gears, two four gears, cross pin shaft and spider gear thrust washers.
See More

Yukon Gear – Round Replacement Yoke Companion Flange For Dana 80 (Part No.41036)

Round Replacement Yoke Companion Flange For Dana 80

from

$374.99
Round replacement yoke companion flange for Dana 80. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 80
  • 37 spline
  • Round companion flange
See More

USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)

Master Overhaul Kit for the Dana 80 Differential (4.125" OD only).

from

$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – RngPnnKt (Part No.24716)

RngPnnKt

from

$459.99
RngPnnKt

Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

Dana 70 & Dana 80 Pinion Gear Thrust Washer

from

$7.99
Dana 70 & Dana 80 pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 70 and 80
See More

Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)

Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up

from

$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 80 with 37 spline axles
  • 4.10 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 80 (Part No.33018)

Replacement Outer Oil Slinger For Dana 80

from

$6.99
Product Features:
  • Outer slinger
  • Fits Dana Spicer 80
See More

Yukon Gear – Differential (Part No.26048)

Differential

from

$1145.00
Differential

Yukon Gear – Bearing Race Driver (Part No.56010)

Bearing Race Driver

from

$215.99
Bearing race drive for Ford 10.25″ and 10.5 axle bearing. (TK 3920). No return.

Product Features:
  • Bearing race driver
  • Fits 3920 race
  • All steel construction
See More

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)

Pinion Install Kit For Dana 80 Differential (4.125" OD Only)

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)

Replacement Spider Gear Set For Dana 80, 37 Spline

from

$318.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 80, 37 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Replacement Outer Oil Baffle For Dana 80

from

$19.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 80
See More

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Dana 80 Tracloc Clutch Set Round Design

from

$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 80 Trac Loc positraction
See More

Yukon Gear – Differential Pinion (Part No.55076)

Differential Pinion

from

$16.99
Differential Pinion

National – Bearings (Part No.LM48548)

Bearings

from

$13.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Steel Cover For Dana 80 (Part No.32323)

Steel Cover For Dana 80

from

$215.99
Product Features:
  • Fits Dana Spicer 80
  • Steel
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down

from

$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 80
  • 3.73 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

Replacement Pinion Nut For Dana 80

from

$26.99
Replacement pinion nut for Dana 80, 1 7/8″ socket.

Product Features:
  • Pinion nut for Dana Spicer 80
  • 1 7/8″ socket
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – Set Up Bearing (Part No.56080)

Set Up Bearing

from

$198.99
NO RETURN HM807046 SET-UP Bearing (1 SINGLE Bearing) for Dana 80 , 11.5AAM , 4.125″ OD .

Product Features:
  • Set up bearing
  • Fits HM807046 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Replacement Pinion Nut Washer For Dana 80

from

$5.99
Product Features:
  • Pinion nut washer
  • Fits Dana Spicer 80
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

2006 Chevrolet C4500 Kodiak Differentials

Maybe you’re in the middle of a full rebuild of that 2006 Chevrolet C4500 Kodiak. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 82 different Differentials in our inventory ranging from $4.99 to $1,145.00. That means you can find the exact parts or products you need to keep that 2006 Chevrolet C4500 Kodiak running smoothly.

Differentials are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Chevrolet C4500 Kodiak. Yukon Gear, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2006 Chevrolet C4500 Kodiak, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 2006 Chevrolet C4500 Kodiak rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2006 Chevrolet C4500 Kodiak Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Chevrolet C4500 Kodiak demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C4500 Kodiak the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2006 Chevrolet C4500 Kodiak Differentials

What are the most purchased Differentials for the 2006 Chevrolet C4500 Kodiak?

Out of 82 Differentials for the 2006 Chevrolet C4500 Kodiak, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts
Repleacement Ring Gear Bolt For Dana 80
from $7.99
This product is not rated
Repleacement Ring Gear Bolt For Dana 80
Differential Ring Gear Bolts