2006 Cadillac DTS Steering and Chassis Parts
More 2006 Cadillac DTS Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2006 Cadillac DTS, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2006 Cadillac DTS Steering and Chassis Parts
Cardone New – Power Steering Pump (Part No.96-71996)
from
$251.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
MOOG – Ball Joint (Part No.K6445)
from
$96.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
MOOG – Stabilizer Bar Bushing Kit (Part No.K201317)
from
$24.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K5255)
from
$19.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)
from
$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Carquest Premium – Return Hose Assembly (Part No.37541)
from
$91.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Maval – Complete Steering Rack, Remanufactured (Part No.M1000436068MAV)
from
$464.32
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
MOOG – Camber Adjusting Kit (Part No.K90476)
from
$32.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Dorman – Left Front Steering Knuckle (Part No.698-077)
from
$401.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Power Steering Pump Pulley (Part No.300-128)
from
$25.49
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rare Parts – Sway Bar Link Kit (Part No.RP17014)
from
$23.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Stab Bar Link Kit (Part No.RP22196)
from
$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
MOOG – Control Arm and Ball Joint Assembly (Part No.RK660168)
from
$80.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Dorman – Suspension Control Arm (Part No.520-394)
from
$205.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
TRW – TRW Steering Rack Boot Kit (Part No.M1030208535TRW)
from
$72.50
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Steering Rack Boot Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
MOOG – Rack & Pinion Bellows Kit (Part No.K6472)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Alignment Shim (Part No.K6660-2)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-3)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Tie Rod End (Part No.ES3452)
from
$67.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Tie Rod End (Part No.RP27474)
from
$38.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$8.99
Camber Bolt Kit
Driveworks – Ball Joint (Part No.DW-K6445)
from
$53.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Popular 2006 Cadillac DTS Steering and Chassis Parts Categories
2006 Cadillac DTS Steering and Chassis Parts
You count on your 2006 Cadillac DTS to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 83 Steering and Chassis Parts ranging in price from $8.99 to $464.32, you’re sure to find everything you need for your 2006 Cadillac DTS.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Imperial, Driveworks, and Cardone. 2006 Cadillac DTS Steering and Chassis Parts start as low as $8.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 756 extensive product reviews on 2006 Cadillac DTS Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Stabilizer Bar Link Kit with 4.8 stars and Ball Joint with 4.4 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2006 Cadillac DTS below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2006 Cadillac DTS
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Cadillac DTS running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Cardone, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Camber Kits. All are waiting to get your 2006 Cadillac DTS back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 2006 Cadillac DTS, and some of our most reviewed Driveworks parts include:
FAQs for 2006 Cadillac DTS Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2006 Cadillac DTS?
Out of 83 Steering and Chassis Parts for the 2006 Cadillac DTS, the most popular in our inventory are:
What are the top-rated 2006 Cadillac DTS Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2006 Cadillac DTS based on customer reviews/ratings are:
