2006 Buick Terraza Exhaust Parts
More 2006 Buick Terraza Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2006 Buick Terraza, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2006 Buick Terraza Exhaust Parts
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18942)
from
$84.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03142)
from
$10.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Walker – Exhaust 55273 Exhaust Resonator and Pipe Assembly (Part No.55273)
from
$103.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Walker – Exhaust 55586 Exhaust Resonator and Pipe Assembly (Part No.55586)
from
$88.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-058)
from
$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Dorman – Crossover Pipe – Includes Hardware (Part No.679-004)
from
$141.99
This exhaust crossover pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust crossover pipe is designed to match the fit and function of the original tube on specified applications
- Restores functionality – reliable replacement for an original part that has failed due to heat, vibration or corrosion
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Crossover Pipe (Part No.H6020367541DOR)
from
$361.55
More like a complete kit than a single part, Dorman’s Exhaust Crossover Pipe includes all necessary gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Comes with two flange bolts and one flange gasket per side for ease of installation
- Rust-resistant for long-lasting performance
- Corrosion-resistant for extended durability
- A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
Elring – Exhaust Seal Ring (Part No.H4002210057ELR)
from
$13.02
Exhaust Seal Ring
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Tin with Metal, Heat Resistant, Premium Materials (Part No.31605)
from
$16.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.61310)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)
from
$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Donut Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31602)
from
$16.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Manifold Crossover Pipe (Part No.679-002)
from
$297.99
This exhaust crossover pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust crossover pipe is designed to match the fit and function of the original tube on specified applications
- Restores functionality – reliable replacement for an original part that has failed due to heat, vibration or corrosion
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99206HM)
from
$178.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.55587)
from
$643.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-901)
from
$274.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-948)
from
$113.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-918)
from
$273.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Felpro – Exhaust Manifold Gasket Set (Part No.MS 96818)
from
$95.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
ACDelco – GM Original Equipment Exhaust Manifold Gasket (Part No.A8111353756ACD)
from
$129.10
ACDelco GM Original Equipment Exhaust Manifold Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95586)
from
$37.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 96329)
from
$61.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Walker – Intermediate Pipe Aluminized 17" (Part No.52262)
from
$56.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Popular 2006 Buick Terraza Exhaust Parts Categories
2006 Buick Terraza Exhaust Parts
You count on your 2006 Buick Terraza to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 32 Exhaust Parts ranging in price from $2.49 to $1,173.99, you’re sure to find everything you need for your 2006 Buick Terraza.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 7 different brands like Walker, Felpro, and Dorman. 2006 Buick Terraza Exhaust Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 178 extensive product reviews on 2006 Buick Terraza Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Exhaust Stud Kit – M10-1.5 x 62mm with 4.4 stars and Exhaust Pipe Flange Gasket with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2006 Buick Terraza below to get started!
Top-Rated Exhaust Parts Brands For Your 2006 Buick Terraza
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Buick Terraza running right for years to come. In our inventory you’ll find brands like Walker, Felpro, Dorman, and even more.
Popular BRExhaust Exhaust Parts
You’ll find popular BRExhaust brand products across Exhaust Pipes. All are waiting to get your 2006 Buick Terraza back on the road. Some of the top-rated BRExhaust products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 2006 Buick Terraza, and some of our most reviewed Walker parts include:
from
$6.49
(13)
2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$184.99
(12)
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
Catalytic Converters
FAQs for 2006 Buick Terraza Exhaust Parts
What are the most purchased Exhaust Parts for the 2006 Buick Terraza?
Out of 32 Exhaust Parts for the 2006 Buick Terraza, the most popular in our inventory are:
from
$16.99
(2)
Donut Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Catalytic Converter Gaskets
What are the top-rated 2006 Buick Terraza Exhaust Parts?
Top-rated Exhaust Parts for your 2006 Buick Terraza based on customer reviews/ratings are:
from
$56.99
(3)
Intermediate Pipe Aluminized 17"
“same as factory no problems previous same part lasted 5 years”
