2006 Buick Rainier Drivetrains

Below you will find various in-demand Buick Drivetrains, components and accessories for your 2006 Rainier. Advance Auto Parts has popular Rainier parts like Transfer Cases, Drive Shafts and Axles, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other Rainier model years including 2004, 2005, 2007 and more. Select a category of 2006 Buick Rainier Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2006 Buick Rainier Drivetrains Categories

Differential Oil

4WD Actuator Switches

U-Joints

Drive Shaft and Axles

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Transfer Case Output Shaft Sensors

Transfer Case Gaskets

Rear Differential Cover Gaskets

Differential Covers

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

OE CV Boot Kits

Differential Pinion Pilot Bearings

4WD Switches

U-Joint Centering Yokes

Differential Cover Bolts

Input Shaft Pilot Bearings

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Ring and Pinions

Spindle Lock Nuts

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Rear Housing Cover Gaskets

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Drive Shaft Seals

Differential Seals

Axle Shaft Lock C-Clips

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Pinion Shafts

Differential Carrier Bearing Shims

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

4WD Indicator Lamp Switch Connector

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Drive Axle Assemblies

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Stub Axle Washers

4WD Disconnect Gear Kits

Transfer Case Main Shaft Seal

Essential Drivetrains for 2006 Buick Rainiers

from

$261.99

Yukon yoke for 8″ GM (mech 3R) with a U/joint size. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.0″
27 spline
Mechanics 3R u-joint size
Inside snap ring design
2.556″ snap ring span
1.125″ cap diameter
Strap style

from

$39.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$59.99

ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$14.79

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$299.99

This four-wheel-drive disconnect gear kit is a direct replacement for a damaged original equipment gear assembly to restore proper power delivery to the front differential.

Product Features:

Direct replacement – this 4WD disconnect is a direct replacement for the original equipment assembly to restore power delivery through to front differential
Durable construction – this gear assembly is made of quality materials for a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle try-on testing to ensure proper fit

from

$35.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$15.29

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$167.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 2008 and down GM 8.6″
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$6.99

Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:

Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS

from

$7.99

Product Features:

Brand may vary by location

from

$24.99

This axle differential seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle differential seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$354.99

This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
Effective fix – eliminates grinding and whining from failed original bearings
Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
Trustworthy quality – backed by team of designers and engineers in the United States

from

$4.99

8.6″ GM standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 8.6″

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

8.2″ & 8.5″ rear cover gasket.

Product Features:

Cover gasket
Fits GM 8.2″, 8.5″ and 8.6″

from

$207.99

10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number 7875 & 1073.

Product Features:

Spider gear kit
Fits 2000-2006 GM 8.6″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$42.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

from

$14.99

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$823.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$179.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
Related repair – smart to have on hand when installing a differential ring and pinion
Durable construction – built for reliable Longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$373.99

Product Features:

Clutch kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
14 piece kit
Composite clutches

from

$221.99

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

Upgrade your 2006 Buick Rainier with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2006 Buick Rainier, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Drivetrains are key to keeping your Rainier functioning at its best. At Advance Auto Parts, we offer a wide selection of 263 Drivetrains for the 2006 Buick Rainier, designed to meet your needs without breaking the bank. From Transfer Case replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2006 Buick Rainier at great prices. Our Drivetrains inventory for this model ranges from just $2.49 to $1,742.99, with an average price of $176.38. Our 263 Drivetrains in stock come from 22 trusted brands, so you’re sure to find the right part for your 2006 Buick Rainier without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Buick Rainier, we stock popular OEM and aftermarket Drivetrains from top names like National, Dorman, Driveworks, and more. National Drivetrains start at just $15.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Driveworks also bring quality to the table, with Drivetrains available starting at $9.99, and at an average 4.2 stars rating. With 2,250 customer reviews and counting, our 2006 Buick Rainier Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Buick Rainier is always ready to roll. We’re committed to providing you with everything you need to keep your Rainier in top shape, all in one place. Start shopping confidently below for your 2006 Buick Rainier!

Best-Selling Transfer Cases for 2006 Buick Rainiers

Enhance the driving experience in your Buick with 20 quality Transfer Case components, starting at $9.99.

show more show less

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$20.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$28.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$239.99

Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$59.99

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$46.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$17.49

Product Features:

Brand may vary by location

from

$49.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$38.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$25.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$47.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$35.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$53.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$179.99

TCaseBrg-SealKit

from

$49.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$14.99

TCase Seal

from

$14.79

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$9.99

USA Standard Gear produces top quality transfer case small parts for repair and maintenance, including full top-to-bottom overhauls and rebuilds. USA Standard has one of the largest inventories of OEM and aftermarket transfer case component parts in the industry. Our large inventory and experienced tech support are two of the reasons we have been an industry leading supplier for decades. When you chose our transfer case small parts, you know you’re going to get the right part in stock backed by in-house quality assurance testing and expert knowledge.

Product Features:

NP226 Transfer Case (New Process)
Input Seal

Most Popular 2006 Buick Rainier Drive Shafts and Axles

Customize your Buick with 25 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Bearings, all priced under $1,742.99.

show more show less

from

$21.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.49

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$9.99

An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$143.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$6.99

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$14.99

GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Supports and allows the axle shaft to rotate with minimal friction
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$26.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.99

Product Features:

c-clip for GM 7.5″, 7.625″ and 8.0″

from

$261.99

Fits GM 8.0″
27 spline
Mechanics 3R u-joint size
Inside snap ring design
2.556″ snap ring span
1.125″ cap diameter
Strap style

from

$226.99

Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″ and 8.6″
30 spline
Mechanics 3R u-joint size
2.556″ snap ring span
1.125″ cap diameter
Inside snap ring design
Strap style

from

$34.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

BUILT TO LAST — Advanced heat treatment process for strength
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$1742.99

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts: gears, pinions, assembly bolts, bearings, seals, etc. Each unit is micrometer checked for proper gear mesh. Units are assembled, sealed and include backing plates, axle shafts and fluid. Axles are packaged in heavy plastic to protect the unit & aid in returning the core.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$823.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$733.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$558.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$397.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$359.99

Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Forged steel

from

$336.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$111.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$46.99

Product Features:

Thrust washer kit
Fits GM 7.2″ IFS

Top Picks for 2006 Buick Rainier Differentials

Upgrade Buick Rainiers with top-quality Differentials parts, including 189 OEM and aftermarket selections for your 2006 model.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$503.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$234.99

Product Features:

GM 10BL 8.5 R/P 3.42A MG FRT/REAR

from

$10.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$88.99

The National bearing & seal kit includes all the components required to complete the repair.

Product Features:

COMPLETE SOLUTION – Includes everything needed to complete the repair
STRONG AND DURABLE – Controlled heat treatment process for strength and durability
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Professional technicians know they can depend on National

from

$99.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KIT-BRG & SEAL GM 8.5 10 BOLT – ’99 & UP LATER

from

$157.99

BEARING GASKET & SEAL KIT, 10 BOLT GM ’99 AND UP MASTER KIT

from

$241.99

Product Features:

GM 10BL 8.5 R/P 3.73A MG FRT/REAR

from

$6.79

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$243.99

Product Features:

GM 10BL 8.5 R/P 3.73 MG FRT/REAR

from

$8.99

High-quality Differential Carrier Shim Kit

Product Features:

CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON

from

$9.29

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$2.99

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$7.99

Differential Cover B

from

$6.99

Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:

Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
7/16″ x 20

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$5.99

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
Required replacement – when servicing the differential
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

In-Demand Universal Joints for 2006 Buick Rainiers

Select from 19 premium Universal Joints parts for your 2006 Buick Rainier, with prices ranging from $4.59 to $234.99.

show more show less

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$42.99

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$25.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 355, 372 & 534G
Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$29.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$48.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$34.49

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$36.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$24.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$4.59

Universal Joint

from

$13.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

For U-Joints 354, 368, 369, 445 & 455
Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$32.99

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$234.99

Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Strap style

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$49.99

Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.

Product Features:

Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

from

$46.99

Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.

Most Sold 2006 Buick Rainier 4WD Components

Explore our best-selling Buick parts for the 2006 Rainier among 5 OEM and aftermarket options starting from $35.49.

show more show less

from

$117.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

from

$42.99

This 4WD switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this 4WD switch is made to match the fit and function of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$299.99

This four-wheel-drive disconnect gear kit is a direct replacement for a damaged original equipment gear assembly to restore proper power delivery to the front differential.

Product Features:

Direct replacement – this 4WD disconnect is a direct replacement for the original equipment assembly to restore power delivery through to front differential
Durable construction – this gear assembly is made of quality materials for a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle try-on testing to ensure proper fit

from

$100.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

Meets or exceeds OE specifications

Top-Rated Drivetrains Brands For Your 2006 Buick Rainier

Shop for the best-rated brands offering Drivetrains and other products for your 2006 Buick Rainiers. Below you’ll find some of our best rated Drivetrains from National, Dorman, and Driveworks, and more. Drivetrains from these brands that fit a 2006 Rainier start at just $9.99 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2006 Buick Rainier Drivetrains

When it comes to maintaining or upgrading your 2006 Buick Rainier, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 2006 Buick Rainier. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $22.32. Plus, with over 32 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $21.99

(22)

Multi-Purpose Seal

“Works as expected.”

from $28.99

(1)

Multi-Purpose Seal

“2005 Trailbalzer front differential to cv shaft seal.”

from $15.99

(9)

Bearing

“as advertised”

Popular Dorman 2006 Buick Rainier Drivetrains

Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 2006 Buick Rainier owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2006 Rainier, Advance Auto Parts carries a full inventory of 3 Dorman Drivetrains. Plus you will be keeping your Buick in peak condition while saving money because prices on these Dorman Drivetrains range from $9.99 to $239.99, plus, with more than 8 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $117.99

(6)

4WD Actuator, Axle

“dorman done it again nice , easy , great install”

from $9.99

(1)

Axle Shaft Retainer

“Great replacement. Perfect fit. Don’t chance your old ones”

from $239.99

(1)

Transfer Case Shift Motor

“Dorman done it Again quick and easy”

FAQs for 2006 Buick Rainier Drivetrains

Which Drivetrains are best-sellers for 2006 Buick Rainiers?

Out of 263 Drivetrains that fit 2006 Buick Rainiers, the following parts are the top sellers:

Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (5185823) – $10.99
Greaseable Premium Universal Joint (10086738) – $42.99
Universal Joint (10265505) – $15.99

What’s the price range for 2006 Buick Rainier Drivetrains?

Drivetrain prices for the 2006 Buick Rainier start at $2.49 and go up to $1,742.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2006 Buick Rainier?

The average price for Drivetrains for the 2006 Buick Rainier is $176.38. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Buick Rainier model years?

Yes, we currently carry Drivetrains for 2 model years of Buick Rainiers between 2004 and 2007. Drivetrains are bought most frequently for the following model years: 2007, 2005, and 2004.

What are the cheapest Drivetrains for my 2006 Buick Rainier?

The cheapest 2006 Buick Rainier Drivetrains we carry in stock are:

Differential Ring Gear Bolt (10282141) – $2.49
Ring Gear Bolt (20520168) – $2.99
Differential Crush Sleeve (10282146) – $2.99
Differential Ring Gear Bolt (10282159) – $2.99
Differential Cross Shaft (10282201) – $2.99

What are the top-rated Drivetrains that fit the 2006 Buick Rainier?

Out of 2,250 reviews by customers, our 2006 Buick Rainier Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2006 Buick Rainier and their top-rated products:

Universal Joints
- Universal Joint (10265718) – $15.99
- Universal Joint (10265505) – $15.99
- Greaseable Premium Universal Joint (10086738) – $42.99
4WD Components
- Universal Joint (10265718) – $15.99
- Universal Joint (10265505) – $15.99
- Greaseable Premium Universal Joint (10086738) – $42.99

What types of Drivetrains do you sell for my 2006 Buick Rainier?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 2006 Buick Rainier:

Can I get help with 2006 Buick Rainier Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Drivetrains and more.

What is your return policy for Buick Rainier Drivetrains?

Advance Auto Parts keeps returns simple. For new Buick Rainier Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Buick Rainier Drivetrains

Yukon Gear – Yoke For 8" GM (Mech 3R) (Part No.41073)

National – Shaft Repair Sleeve (Part No.99139)

GM Genuine Parts – Vehicle Speed Sensor (Part No.19302667)

National – Multi-Purpose Bearing (Part No.FC-66561)

Motive Gear – Pinion Nut (Part No.1260823)

Dorman – Four Wheel Drive Axle Disconnect Gear Set (Part No.600-117)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2629)

Schaeffler – Shaft Seal (Part No.SS2332)

Yukon Gear – Pinion Install Kit For ’08 & Down GM 8.6" Differential (Part No.13073)

Yukon Gear – Cross Pin Bolt (Part No.33067)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Dorman – 4 Wheel Drive Oil Seal (Part No.600-605)

Dorman – Differential Ring and Pinion Set (Part No.697-303)

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

Yukon Gear – 10 Bolt Open Spider Gear Set For ’00-’06 8.6" GM With 30 Spline Axles (Part No.16056)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Yukon Gear – Pinion Nut Washer (Part No.33167)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Dorman – Drive Shaft (Part No.936-406)

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-119)

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

Motive Gear – Differential Carrier (Part No.GM8.6L)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

National – Bearing (Part No.M88048)

Felpro – Transfer Case Adapter Gasket (Part No.72769)

National – Multi-Purpose Seal (Part No.710687)

Dorman – Transfer Case Shift Motor (Part No.600-903)

GM Genuine Parts – Vehicle Speed Sensor (Part No.19302667)

Carquest Premium – Vehicle Speed Sensor (Part No.SBA3658)

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

National – Multi-Purpose Seal (Part No.710660)

National – Shaft Repair Sleeve (Part No.99189)

National – Multi-Purpose Seal (Part No.710692)

National – Shaft Repair Sleeve (Part No.99210)

National – Transfer Case Input Shaft Seal (Part No.710693)

National – Multi-Purpose Bearing (Part No.N-5210-KLB)

USA Standard Gear – TCaseBrg-SealKit (Part No.72422)

Schaeffler – Shaft Seal (Part No.SS2883)

Victor Reinz – Transfer Case Gasket (Part No.71-14104-00)

USA Standard Gear – TCase Seal (Part No.73897)

National – Multi-Purpose Bearing (Part No.FC-66561)

Schaeffler – Cup (Part No.M88010)

USA Standard Gear – Transfer Case NP226 Input Seal (Part No.72958)

National – Multi-Purpose Seal (Part No.710648)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513067)

National – Shaft Repair Sleeve (Part No.99139)

Dorman – Help – Axle Shaft Retainer (Part No.05311)

National – Shaft Repair Sleeve (Part No.99174)

Carquest Premium – New CV Axle Shaft Assembly (Part No.NCV10248)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-RP513067)

Yukon Gear – C/Clip (Part No.33083)

GM Genuine Parts – Drive Axle Inner Shaft Bearing (Part No.26053326)

National – Multi-Purpose Bearing (Part No.HK-4012)

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

Yukon Gear – Yoke For 8" GM (Mech 3R) (Part No.41073)

Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)

National – Multi-Purpose Bearing (Part No.107)

Spartan – Drive Axle Assembly; GM SUV 06-09 Axle (Part No.RAX2118E)

Dorman – Drive Shaft (Part No.936-406)

Dorman – Rear Driveshaft Assembly (Part No.946-048)

Dorman – Drive Shaft (Part No.936-407)

Dorman – Drive Shaft (Part No.938-307)

Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

Dorman – Drive Shaft: Adjustable (Part No.938-190)

Schaeffler – Axle Shaft Repair Bearing (Part No.DR0151K)

Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 55479)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Powertrax – Grip LS Traction System (Part No.LS201030)

Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)

National – Multi-Purpose Bearing (Part No.A-18)