2006 BMW M3 Fuel and Emissions Systems

Essential 2006 BMW M3 Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Diverter Valve Gasket (Part No.ECA2998)

Diverter Valve Gasket

from

$12.49
Diverter Valve Gasket

Carquest Premium – Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)

Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$39.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Diverter Valve (Part No.ECC2998)

Diverter Valve

from

$254.99
Diverter Valve

Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDC1045)

Evaporative Emissions System Leak Detection Pump

from

$88.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

aFe POWER – Sprint Booster (Part No.77-16302)

Sprint Booster

from

$297.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Reduces Throttle Response Time
  • Improves Acceleration
  • Easy To Install
  • Does Not Affect The Vehicles Electronic System
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)

Fuel Injector Seal Kit

from

$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

APA/URO Parts – Ambient Temp Sensor (Part No.P4025743812APA)

Ambient Temp Sensor

from

$40.46
Ambient Temp Sensor

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1659)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$589.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)

Fuel Cap Tester Adapter

from

$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Vemo – Relay (Part No.P2020309952VMO)

Relay

from

$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

VDO – Fuel Tank Sender Ass (Part No.E200575882VDO)

Fuel Tank Sender Ass

from

$185.67
Fuel Tank Sender Ass

Pierburg – Secondary Air Pump (Part No.B6010248606APG)

Secondary Air Pump

from

$452.19
Pierburg a global supplier to European automakers manufactures an OE-equivalent direct fit Air Pump that maintains the quality and performance of the Original Equipment it replaces. Pierburg designed a modular system of brackets, and vibration absorbing elements to ensure that the secondary air pump does not interact with its mounting location.

Product Features:
  • OE design
  • Low noise
  • Long working life
  • High thermal and mechanical resistance
  • Sealed bearing design
  • Housing sealed to protect against contamination
  • High output DC motor
  • Exact OE Body and engine mounting
See More

Bosch – Fuel Pressure Regulator O-Ring (Part No.C3002290581BOS)

Fuel Pressure Regulator O-Ring

from

$4.63
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 5mm x 1.5mm
See More

Pierburg – Pierburg Fuel Pressure Regulator (Part No.C3000250030APG)

Pierburg Fuel Pressure Regulator

from

$78.58
The Pierburg Fuel Pressure Regulator is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Corrosion resistant housing material
  • Premium diaphragm materials for longer service life
  • Internal precision components maintain stable fuel pressure and ensure adequate fuel return
  • Meets or exceeds OEM specifications
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE2441)

Vapor Canister Purge Solenoid

from

$141.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6402)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$129.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

DENSO – Wideband Oxygen Sensor: 5 Wire, 14.29" Long, Heated, Exact Fit (Part No.234-5135)

Wideband Oxygen Sensor: 5 Wire, 14.29" Long, Heated, Exact Fit

from

$211.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

NTK – Switching Oxygen Sensor: 4 Wire, 26.75" Long, Heated, Direct Fit (Part No.25743)

Switching Oxygen Sensor: 4 Wire, 26.75" Long, Heated, Direct Fit

from

$177.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Carquest Premium – Idle Air Control Valve (Part No.ABC2824)

Idle Air Control Valve

from

$1081.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1028)

Fuel Injection Pressure Regulator

from

$83.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Pierburg – Secondary Air Injection Check Valve (Part No.B6050143148APG)

Secondary Air Injection Check Valve

from

$175.36
The Pierburg Air Pump Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)

Vapor Canister Gromm

from

$6.81
Vapor Canister Gromm

Carquest Premium – Remanufactured Fuel Injector (Part No.A512-1085)

Remanufactured Fuel Injector

from

$151.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications.
  • Includes new o-rings and seals made of premium OE quality materials.
  • Includes application specific technical bulletin, where applicable.
See More

Bosch – Port Fuel Injector (Part No.C1000110330BOS)

Port Fuel Injector

from

$108.01
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.

Product Features:
  • Low-pressure systems are less complex and more affordable than high-pressure systems
  • Robust combustion process tolerates lower-quality fuel
  • Maintenance-friendly design reduces the overhead for system diagnostics
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1195)

Remanufactured Fuel Injector

from

$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

2006 BMW M3 Fuel and Emissions Systems

You count on your 2006 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 41 Fuel and Emissions Systems ranging in price from $2.39 to $589.99, you’re sure to find everything you need for your 2006 BMW M3.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Carquest Premium, Delphi, and Rein. 2006 BMW M3 Fuel and Emissions Systems start as low as $2.39!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 40 extensive product reviews on 2006 BMW M3 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal with 3.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2006 BMW M3 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2006 BMW M3

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 BMW M3 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Delphi, Rein, and even more.

Popular Rein Fuel and Emissions Systems

You’ll find popular Rein brand products across Gas Caps. All are waiting to get your 2006 BMW M3 back on the road. Some of the top-rated Rein products in these categories are:
Cap-Fuel
from $34.99
(2)
Cap-Fuel
Gas Caps

FAQs for 2006 BMW M3 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2006 BMW M3?

Out of 41 Fuel and Emissions Systems for the 2006 BMW M3, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Seal Kit
from $2.99
This product is not rated
Fuel Injector Seal Kit
Fuel Injector O-Ring Kits
OE Quality Automotive Fuel Tank Cap
from $40.83
This product is not rated
OE Quality Automotive Fuel Tank Cap
Gas Caps

What are the top-rated 2006 BMW M3 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2006 BMW M3 based on customer reviews/ratings are:
Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal
from $100.99
(2)
Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal
“Great price”