2006 Audi A6 Cooling and Climate Controls

Below you will find various in-demand Audi Cooling and Climate Controls, components and accessories for your 2006 A6. Advance Auto Parts has popular A6 parts like Engine Cooling Parts, HVAC Electrical Parts, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other A6 model years including 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and more. Select a category of 2006 Audi A6 Cooling and Climate Controls below and start saving instantly.

Popular 2006 Audi A6 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Engine Cooling Fan Controllers

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Coolant Reservoirs

Coolant Temperature Sensors

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Blower Motor Resistors

AC Condensers

AC Line O-Rings

AC Evaporators

AC Caps and Valve Core Kits

Engine Coolant Pipes

Thermostat Housing Gaskets

Heater Valves

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Expansion Valve and Orifice Tubes

Coolant Outlet Flanges

HVAC Blower Motor Regulators

AC Refrigerant Pressure Sensors

AC Temperature Control Switches

Radiator Mount Brackets

Heater Core Temperature Sensors

Radiator Cap Tester Adapters

Radiator Support Splash Shield Clip

HVAC Temperature Delay Relay Harness Connectors

Essential Cooling and Climate Controls for 2006 Audi A6s

from

$259.79

A/C Hose

from

$56.57

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$8.94

The Mahle Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$14.29

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$190.07

The APA/URO Auxiliary Fan Control Unit is manufactured to OE specifications and is a direct fit replacement. The auxiliary fan control unit controls the cooling fans on your vehicle. Failure of this unit can cause your radiator cooling fans to not operate properly, leading to engine overheating and failure.

Product Features:

OE Quality and Direct Fit Application
Supplied with Factory Mounting and Connectors

from

$32.99

New Standard Replacement A/C System Seal Kit, MT2622, L4 Engine

Product Features:

MT2622, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$8.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$232.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.
O-Rings and gaskets necessary for installation are included.

from

$228.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$658.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$144.80

Blower Motor Regulat

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$672.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$49.49

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$75.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$50.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$327.69

Very useful OEM fastener assortment kit for Audis and VWs. This kit includes 5-10 pieces of each of the following part numbers:

Product Features:

N90335005
8D0805121B
N90775001
4A0805163
4D0867299A
N10516801
8D0805121
N90335004
2E1827649
7M0867299K
191853733A
N90974701
4A0805121A
3B0868243
6Q0868243

from

$88.99

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$44.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$198.88

Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$64.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Manufactured with high quality materials
Designed for underhood conditions
Quality constructed for durability
Application specific for this vehicle

from

$14.94

Air Conditioning Temperature Switch

from

$39.72

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$77.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$18.99

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

Tested to ensure maximum performance
Manufactured to strict engineering standards/specifications in materials and tolerances
Long life and durability
Made by the OE manufacturer

from

$50.97

Water Temperature Sender

Upgrade your 2006 Audi A6 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2006 Audi A6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your A6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 81 Cooling and Climate Controls for the 2006 Audi A6, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to HVAC Electrical Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2006 Audi A6 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.86 to $741.73, with an average price of $138.03. Our 81 Cooling and Climate Controls in stock come from 29 trusted brands, so you’re sure to find the right part for your 2006 Audi A6 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Audi A6, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Factory Air, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $4.99, and at an average 4 stars rating. With 563 customer reviews and counting, our 2006 Audi A6 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Audi A6 is always ready to roll. We’re committed to providing you with everything you need to keep your A6 in top shape, all in one place. Start shopping confidently below for your 2006 Audi A6!

Best-Selling Engine Cooling Parts for 2006 Audi A6s

Enhance the driving experience in your Audi with 40 quality Engine Cooling Part components, starting at $0.86.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$11.99

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$20.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
Robust design and high grade materials meet the stringent demands of today’s service professional

from

$77.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$29.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$109.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$24.17

Water Temp. Sensor

from

$23.99

from

$306.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$89.80

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$351.96

Valeo Service offers OE quality motor fans with high cooling efficiency and allows you to save money keeping your engine safe.

Product Features:

OE quality
Quiet operation and dependable performance
Dual Bearing design technology
Vibration free operation
Precision assembled and balanced with all new components
Tested to OEM specifications

from

$342.10

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

OE-Equivalent
Direct fit for easy installation.
High quality corrosion resistant materials.
OE Style mounting brackets and hose connections.
Mechanically bonded aluminum core.
Integrated transmission oil cooler when applicable.

from

$337.42

Aux. Fan Control Uni

from

$327.69

Very useful OEM fastener assortment kit for Audis and VWs. This kit includes 5-10 pieces of each of the following part numbers:

Product Features:

N90335005
8D0805121B
N90775001
4A0805163
4D0867299A
N10516801
8D0805121
N90335004
2E1827649
7M0867299K
191853733A
N90974701
4A0805121A
3B0868243
6Q0868243

from

$241.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$241.66

COOLANT PIPE

from

$236.46

Auxiliary Fan Assemb

from

$165.99

New Platinum Pro Radiator, 3.2 Liter Engine

Product Features:

3.2 Liter Engine, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$164.31

ACM is a supplier of Original Equipment quality climate control products. 200 with 280mm

from

$125.99

Trimline Straight Blade Electric Fan

from

$112.99

Trimline Straight Blade Electric Fan

from

$108.62

The Rein Thermostat is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$107.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$76.45

Water Pump

from

$75.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$72.52

Thermostat Assembly

from

$65.85

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$64.99

Matches OE form, fit and function
Manufactured with high quality materials
Designed for underhood conditions
Quality constructed for durability
Application specific for this vehicle

from

$64.99

Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

Matches original equipment design specifications
Direct fitments allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances
Thermostat set to 87 degrees Celsius to maintain optimal running temperature

from

$61.09

THERMOSTAT ASSEMBLY

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$37.34

COOLANT PIPE

from

$29.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$16.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$8.94

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$7.19

Expansion Tank Cap

from

$5.43

Radiator Mount

from

$3.73

Water Flange O-Ring

from

$0.86

Cooling Hose Flange Plug

Most Popular 2006 Audi A6 HVAC Electrical Parts

Customize your Audi with 2 HVAC Electrical Parts products like Cabin Air Temperature Sensors and Heater Core Temperature Sensors, all priced under $107.99.

show more show less

from

$107.99

from

$53.99

Top Picks for 2006 Audi A6 Air Conditioning Parts

Upgrade Audi A6s with top-quality Air Conditioning Parts parts, including 31 OEM and aftermarket selections for your 2006 model.

show more show less

from

$22.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$741.73

Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
Equipped with a new clutch assembly
OEM supplier to many European vehicle manufacturers

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$4.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$82.99

New Platinum Pro A/C Condenser, 3.2/4.2 Liter Engines

Product Features:

3.2/4.2 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$113.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$50.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$32.99

New Standard Replacement A/C System Seal Kit, MT2622, L4 Engine

Product Features:

MT2622, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.68

A/C Temp. Switch

from

$615.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$599.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance

from

$565.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$444.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$339.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$259.79

A/C Hose

from

$216.67

A/C Condenser

from

$176.76

A/C Evaporator

from

$112.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$84.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$64.30

A/C Receiver Drier

from

$60.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$49.49

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$16.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$15.08

Air Conditioning Temperature Switch

from

$14.94

Air Conditioning Temperature Switch

from

$9.79

A/C Service Valve Co

from

$8.69

A/C Orifice Tube

from

$7.38

A/C Orifice Tube

In-Demand Heating Parts for 2006 Audi A6s

Select from 4 premium Heating Parts parts for your 2006 Audi A6, with prices ranging from $106.99 to $503.64.

show more show less

from

$503.64

Heater Valve

from

$277.24

Heater Core

from

$196.93

Heater Valve

from

$106.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Sold 2006 Audi A6 Blower Motor and Related Products

Explore our best-selling Audi parts for the 2006 A6 among 4 OEM and aftermarket options starting from $30.49.

show more show less

from

$30.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$173.05

The Vemo Blower Motor Regulator is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$524.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$144.80

Blower Motor Regulat

Top-Rated Cooling and Climate Controls Brands For Your 2006 Audi A6

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2006 Audi A6s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 2006 A6 start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2006 Audi A6 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2006 Audi A6, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2006 Audi A6. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2006 Audi A6 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2006 Audi A6 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2006 A6, Advance Auto Parts carries a full inventory of 24 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $4.99 to $615.99, plus, with more than 225 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$30.49

This product is not rated

Multi Purpose Relay

“”

from
$44.99

This product is not rated

A/C Compressor Relay Connector

“”

from
$109.99

This product is not rated

Engine Water Pump: New, Gasket/Seals Included

“”

FAQs for 2006 Audi A6 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2006 Audi A6s?

Out of 81 Cooling and Climate Controls that fit 2006 Audi A6s, the following parts are the top sellers:

Cap & Valve A/C System Seal Kit (15890310) – $17.99
A/C Severe Temp Automatic Adjusting Orifice Tube (18892178) – $15.99
Engine Coolant Temperature Sensor (10017275) – $20.99

What’s the price range for 2006 Audi A6 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2006 Audi A6 start at $0.86 and go up to $741.73 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2006 Audi A6?

The average price for Cooling and Climate Controls for the 2006 Audi A6 is $138.03. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Audi A6 model years?

Yes, we currently carry Cooling and Climate Controls for 22 model years of Audi A6s between 1995 and 2018. Cooling and Climate Controls are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, and 2010.

What are the cheapest Cooling and Climate Controls for my 2006 Audi A6?

The cheapest 2006 Audi A6 Cooling and Climate Controls we carry in stock are:

Cooling Hose Flange Plug (10792211) – $0.86
Water Flange O-Ring (12591259) – $3.73
A/C Orange Orifice Tube (10052824) – $4.99
Radiator Mount (10743361) – $5.43
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What are the top-rated Cooling and Climate Controls that fit the 2006 Audi A6?

Out of 563 reviews by customers, our 2006 Audi A6 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2006 Audi A6 and their top-rated products:

Engine Cooling Parts
- Engine Coolant Reservoir Cap (5020080) – $11.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 2006 Audi A6?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2006 Audi A6:

Can I get help with 2006 Audi A6 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.

What is your return policy for Audi A6 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Audi A6 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Audi A6 Cooling and Climate Controls

ACM – A/C Hose (Part No.R1020341205ACM)

Behr – Expansion Tank (Part No.G1030127453BEH)

Mahle – Engine Coolant Thermostat Housing Gasket (Part No.G40201197205MAH)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39464)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

APA/URO Parts – Auxiliary Fan Control Unit (Part No.G5007167102APA)

KAI – A/C System Seal Kit (Part No.FTT010068)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10225)

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T5805614)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3208)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1699)

Febi – Blower Motor Regulat (Part No.R2041452019FEB)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – A/C New, with Clutch, with 6SEU14C Compressor (Part No.T158322)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Carquest Premium – A/C Accumulator (Part No.T83731)

Vaico – Door Panel Fastener Assortment Kit (Audi VW, 18-Piece) (Part No.4Z100461705VCO)

Geba – Geba Water Pump (Part No.G3000116187GEB)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

Nissens – Nissens Heater Core (Part No.R3000133671NSS)

Beck/Arnley – Water Flange (Part No.147-0039)

Original Equipment – Air Conditioning Temperature Switch (Part No.R1055160375OEA)

Mahle – Thermostat (Part No.G400052649MAH)

Motorad – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.506-192)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Rein – Temperature Sensor Kit (Part No.ELC0051P)

FAE – Water Temperature Sender (Part No.P403684657FAE)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)

Motorad – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.506-192)

NTK – Engine Coolant Temperature Sensor (Part No.EF0153)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1220)

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-835)

Geba – Water Pump (Part No.G3000931071GEB)

Valeo – Service Auxiliary Cooling Fan Assembly (Part No.G5000169959VAL)

Behr – Radiator (Part No.G1000390001BEH)

APA/URO Parts – Aux. Fan Control Uni (Part No.G5007433358APA)

Vaico – Door Panel Fastener Assortment Kit (Audi VW, 18-Piece) (Part No.4Z100461705VCO)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.812828)

Worldpac – COOLANT PIPE (Part No.G20254153958RIN)

Behr – Auxiliary Fan Assemb (Part No.G5000169959BEH)

KAI – Radiator (Part No.RAD2828)

ACM – Auxiliary Fan Assembly (Part No.G5000169961ACM)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)

Rein – Thermostat (Part No.G4000319286RIN)

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 192 Degrees (Part No.902-718)

Autopart International Inc – Water Pump (Part No.G30001932878API)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Autopart International Inc – Thermostat Assembly (Part No.G40021941108API)

Behr – Behr Expansion Tank (Part No.G1030401903BEH)

Beck/Arnley – Water Flange (Part No.147-0039)

Rein – Thermostat Assembly 87C (Part No.CTA0022)

Worldpac – THERMOSTAT ASSEMBLY (Part No.G4002180204CAL)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Worldpac – COOLANT PIPE (Part No.G20251725656MTC)

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-39052-00)

Rein – Cap-Expansion Tank (Part No.CPE0047)

Mahle – Engine Coolant Thermostat Housing Gasket (Part No.G40201197205MAH)

Autopart International Inc – Expansion Tank Cap (Part No.G10402046473API)

Febi – Radiator Mount (Part No.G1020285459FEB)

Mahle – Water Flange O-Ring (Part No.G202437848MAH)

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2034)

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTA2004)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26767)

Behr – A/C Compressor w/ Clutch, New (Part No.R1000398636BEH)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Carquest Premium – A/C Orange Orifice Tube (Part No.T38639)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

KAI – A/C Condenser (Part No.CNDDPI3424)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2268)