2005 Saab 9-3 Body Parts
More 2005 Saab 9-3 Body Parts Categories
If you’re looking for an original Body Parts replacement for a 2005 Saab 9-3, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 2005 Saab 9-3 Body Parts
KAI – Fender Liner (Part No.SB1249103)
from
$27.99
New Standard Replacement Passenger Side Fender Liner, 2.0 Liter Engines
Product Features:
See More
Product Features:
- 2.0 Liter Engines, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.SB1248103)
from
$28.99
New Standard Replacement Driver Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Burco – Side View Replacement Mirror (Part No.2770)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Dorman – Plastic Backed Mirror Replacement (Part No.O50701674464DOR)
from
$189.78
Pre-cut to original mirror size and shaped for a perfect fit, Dorman’s Door Mirror Glass is convenient to purchase and easy to install. Depending on your mirror’s design, either double-sided tape or a backing plate is included for swift, permanent attachment. Plus, it’s affordable: replace only the damaged or missing glass, not the entire mirror Assembly.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Available for left and right sides of vehicle
- Plastic-backed Mirror Glass is available with defrost and turn signal (where applicable)
- Package includes step-by-step installation instructions
Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56708)
from
$203.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.
Product Features:
See More
Product Features:
- Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
- Seamless design – precisely cut to match the shape and look of the factory glass
- Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
- Easy installation – follow simple step-by-step procedure to swap out existing glass
ACDelco – Multi-Purpose Pigtail (Part No.PT2296)
from
$73.99
ACDelco Professional Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Protective outer coverings provide long-lasting durability
- Color-coded wires allow for easy installation
- Manufactured to meet expectations for fit, form, and function
Professional Parts Sweden – Mirror Back (Part No.O5090435144PPS)
from
$40.45
Mirror Back
Needa Parts – Air-Dam And Grille Push-Type Retainer (Part No.461020B)
from
$4.99
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Professional Parts Sweden – Trim Fastener (Part No.Q2010574546PPS)
from
$1.41
Trim Fastener
Professional Parts Sweden – Door Mirror (Part No.O5050846503PPS)
from
$31.96
Door Mirror
KAI – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.SB1321108)
from
$309.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, Power Folding, With Heated Glass, Sedan Only, With Memory, Power-Folding, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- Power Folding, With Heated Glass And Memory, Paint To Match, Sedan Models, Convex Glass
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Professional Parts Sweden – Door Mirror (Part No.O5050846504PPS)
from
$41.50
Door Mirror
Burco – Wide Angle Heated Side View Mirror Replacement with Backing Plate (Part No.5399WHRSG)
from
$104.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
International Suspension Group – Trunk Strut (Part No.O2064281796ISG)
from
$23.71
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.
Product Features:
See More
Product Features:
- Exact replacement, engineered for your application.
- Rust-resistant piston rod extends product life.
- Easy lifting, reduced closing effort.
- Consistent lifting force through 50,000 cycles.
StrongArm – Trunk Lift Support: 12.56" Ext Length, 4.25" Travel, 85 Lbs of Force, 1 Pk (Part No.E6274)
from
$54.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Atlas Lift – Lift Support (Part No.LS10896)
from
$24.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Stabilus – Gas Charged Trunk Strut (Part No.O2064281794STB)
from
$63.14
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Hood Lift Support: 20.66" Ext Length, 8.0" Travel, 58 Lbs of Force, 1 Pk (Part No.C4380)
from
$40.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Atlas Lift – Lift Support (Part No.LS11382)
from
$31.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS11305)
from
$26.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Dorman – Window Regulator: Power, 1 Pack (Part No.752-914)
from
$123.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Dorman – Window Regulator: Power, 1 Pack (Part No.749-109)
from
$129.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Dorman – Window Regulator: Power, 1 Pack (Part No.752-845)
from
$159.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Magneti Marelli – Power Window Regulator (Part No.O3040147513MRL)
from
$159.42
Without Electric Motor Magneti Marelli manufactures a direct fit window regulator that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability
APA/URO Parts – Power Window Regulator (Part No.O3040147492APA)
from
$219.34
Without Electric Motor APA/URO manufactures a direct fit window regulator that guarantees OEM quality, fit and performance,
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability
Professional Parts Sweden – Power Window Regulator with Motor (Part No.O3052837541PPS)
from
$228.68
Without Electric Motor Professional Parts Sweden manufactures a direct fit window regulator that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability
World Source One – Power Window Regulator (Part No.O3040147491WSO)
from
$67.29
Without Electric Motor The WORLD SOURCEONE Power Window line includes window regulators and motor-regulator assemblies that are competitively priced against remanufactured units and do not require a core trade-in. All WSO window regulators and regulator-motor assemblies come complete and ready for easy installation. The OE quality means increased installer confidence with fewer comebacks. Coverage includes European, and Asian passenger cars and light trucks.
Product Features:
See More
Product Features:
- Superior, reliable performance compared to competitive products
- Identical to OE for simplified installation and no comebacks
- Durable construction including long life motors, gears, cables and case
- Factory original equipment connectors
- No additional time consuming steps needed for installation
- Vehicle specific fit and function
- Manufactured in ISO Certified facilities
Pimax – Power Window Regulator and Motor Assembly (Part No.O3052134372PIM)
from
$247.73
Pimax manufactures a direct fit window regulator that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
Popular 2005 Saab 9-3 Body Parts Categories
2005 Saab 9-3 Body Parts
You count on your 2005 Saab 9-3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 25 Body Parts ranging in price from $1.41 to $309.99, you’re sure to find everything you need for your 2005 Saab 9-3.
Brands matter. If you want to shop a specific Body Parts brand, we stock 12 different brands like Professional Parts Sweden, AC Delco, and Dorman. 2005 Saab 9-3 Body Parts start as low as $1.41!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 123 extensive product reviews on 2005 Saab 9-3 Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2005 Saab 9-3 below to get started!
Top-Rated Body Parts Brands For Your 2005 Saab 9-3
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Saab 9-3 running right for years to come. In our inventory you’ll find brands like Professional Parts Sweden, AC Delco, Dorman, and even more.
Popular Professional Parts Sweden Body Parts
You’ll find popular Professional Parts Sweden brand products across Vehicle Mirrors. All are waiting to get your 2005 Saab 9-3 back on the road. Some of the top-rated Professional Parts Sweden products in these categories are:
Top-Rated Dorman Body Parts
If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Body Parts for your 2005 Saab 9-3, and some of our most reviewed Dorman parts include:
FAQs for 2005 Saab 9-3 Body Parts
What are the most purchased Body Parts for the 2005 Saab 9-3?
Out of 25 Body Parts for the 2005 Saab 9-3, the most popular in our inventory are:
