2005 Saab 9-2X Steering and Chassis Parts

Essential 2005 Saab 9-2X Steering and Chassis Parts

Rein – Power Steering Suction Hose (Part No.PSH0523)

Power Steering Suction Hose

from

$29.99
Rein OE Quality power steering suction hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering suction hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose with clamps
  • OE quality, braided rubber compound hose
  • Pre attached protective jacket(s) and heat sleeve(s), where required
  • Ensures proper operation of the power steering system
See More

Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.524-502)

Suspension Control Arm And Ball Joint Assembly

from

$209.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Rare Parts – Ball Joint (Part No.RP10598)

Ball Joint

from

$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

MOOG – Stabilizer Bar Link (Part No.K80875)

Stabilizer Bar Link

from

$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Incorporates proven design and engineering features
See More

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)

Roll Centre/Bump Steer Correction Kit

from

$292.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BSF12)

Sway Bar 22Mm Heavy Duty

from

$296.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Subframe Lock Kit (Part No.KSB750)

Subframe Lock Kit

from

$52.99
KSB750 is designed to lock the rear subframe which allows for more precise alignment of the rear wheels and limits the amount of rear subframe movement under cornering loads which can result in poor dynamic alignment settings. The hardware can easily be installed and removed between motorsport activities. The kit will increase rear NVH as it effectively locks out the rear subframe bushings. It is designed for motorsport use only and should not be used for extended periods as it may lead to premature chassis wear.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Control Arm Inner Lock Washers (Part No.KCA377)

Control Arm Inner Lock Washers

from

$51.99
KCA377 toe-adjuster locking kit is designed to complement cars already fitted with KTA107, KTA108 and KTA109 camber & toe adjustable control arms. The kit replaces the OE or stock toe-adjuster, and eliminates the tendency of the friction based factory adjuster to move and alter the required toe settings. Particularly relevant for race or rally vehicles or other high load applications. Can also be used with some other types of adjustable control arms.

Product Features:
  • Featuring anti geometry that works to aid traction by allowing the wheel to track the ground more precisely resulting in superior traction under power including cornering and dramatically reducing understeer and front wheel spin.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

MOOG – Camber Adjusting Kit (Part No.K5330)

Camber Adjusting Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Whiteline – Steering Rack And Pinion Mount Bushing (Part No.KSR206)

Steering Rack And Pinion Mount Bushing

from

$92.99
Power steering, aggressive wheel alignment geometry, wider wheels and lower profile tyres have all put radically increased loading on the steering systems of modern cars. Add to that engine bay contaminants such as oil leaks that also help to degrade the performance of steering rack mount bushings. Whiteline steering rack mounts are engineered to outlast and enhance steering precision and feedback.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Whiteline – Sway Bar Link (Part No.KLC26)

Sway Bar Link

from

$140.99
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

MOOG – Ball Joint (Part No.K9513)

Ball Joint

from

$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Designed to meet or exceed original equipment performance
See More

PWR – New Power Steering Pump with Pulley (Part No.60-5151P)

New Power Steering Pump with Pulley

from

$429.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:
  • PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
  • All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
  • Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
  • Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
  • Enables you to achieve a more efficient, durable, and professional installation
See More

Cardone – Power Steering Pump (Part No.21-5396)

Power Steering Pump

from

$203.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W0406-24G)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 24mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Kit (Part No.KBR21-20)

Sway Bar Mount Kit

from

$171.99
Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

MOOG – Tie Rod End (Part No.ES3712)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010285751SNK)

Sankei 555 Tie Rod End

from

$38.88
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Whiteline – Strut Mount (Part No.KCA335)

Strut Mount

from

$266.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA375)

Control Arm Lower Inner Rear Bushing

from

$125.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Dorman – Suspension Control Arm (Part No.522-688)

Suspension Control Arm

from

$296.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

2005 Saab 9-2X Steering and Chassis Parts

You count on your 2005 Saab 9-2X to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 61 Steering and Chassis Parts ranging in price from $20.29 to $434.99, you’re sure to find everything you need for your 2005 Saab 9-2X.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Cardone, Moog, and Driveworks. 2005 Saab 9-2X Steering and Chassis Parts start as low as $20.29!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 416 extensive product reviews on 2005 Saab 9-2X Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Pump with 2.3 stars and Tie Rod End with 3.7 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2005 Saab 9-2X below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2005 Saab 9-2X

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Saab 9-2X running right for years to come. In our inventory you’ll find brands like Cardone, Moog, Driveworks, and even more.

Popular Cardone Steering and Chassis Parts

You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 2005 Saab 9-2X back on the road. Some of the top-rated Cardone products in these categories are:
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

Top-Rated Driveworks Steering and Chassis Parts


If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 2005 Saab 9-2X, and some of our most reviewed Driveworks parts include:
Sway Bar Link Kit
from $37.99
(65)
Sway Bar Link Kit
Sway Bar Link Kits
Camber Bolt Kit
from $20.29
(10)
Camber Bolt Kit
Front Alignment Kits
Sway Bar Link Kit
from $26.99
(2)
Sway Bar Link Kit
Sway Bar Link Kits

FAQs for 2005 Saab 9-2X Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2005 Saab 9-2X?

Out of 61 Steering and Chassis Parts for the 2005 Saab 9-2X, the most popular in our inventory are:
Ball Joint
from $54.99
(38)
Ball Joint
Suspension Ball Joint Kits
Tie Rod End
from $65.99
(9)
Tie Rod End
Tie Rod Ends
Camber Adjusting Kit
from $34.99
(9)
Camber Adjusting Kit
Camber Kits

What are the top-rated 2005 Saab 9-2X Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2005 Saab 9-2X based on customer reviews/ratings are:
Power Steering Pump
from $203.99
(6)
Power Steering Pump
“I had no problems transferring parts & installing this pump on my son’s 2005 WRX 2.0L”
Tie Rod End
from $44.99
(3)
Tie Rod End
“This is an inner Tie Rod End. The other reviewer just ordered the wrong part and feels the need to blame others for their mistake. This is a quality M”
Stabilizer Bar Link
from $32.99
(3)
Stabilizer Bar Link
“Does not work on a 2006 Outback, broke in a month. Original had ball joint type ends.”