2005 Pontiac G6 Air Intakes
Find Your Specific 2005 Pontiac G6 Air Intakes
Below you will find various in-demand Pontiac Air Intakes, components and accessories for your 2005 G6. Advance Auto Parts has popular G6 parts like Intake Manifold Parts, Throttle Body Parts, Throttle Bodies & Carb Parts and more. You’ll also find aftermarket and OEM Air Intakes for other G6 model years including
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2005 Pontiac G6 Air Intakes below and start saving instantly.
Popular 2005 Pontiac G6 Air Intakes Categories
Essential Air Intakes for 2005 Pontiac G6s
GM Genuine Parts – Electronic Throttle Body: New, Original Equipment (Part No.12694871)
from
$199.99
Throttle Body with Throttle Actuator
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Hitachi – Electronic Throttle Body (ETB) (Part No.C7000430598HIT)
from
$333.64
The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OE Manufactured assemblies include Throttle Position sensors
- Controls the volume of air flowing into the engine
- Improves engine power, fuel economy and emissions performance
Dorman – Electronic Throttle Body: New (Part No.977-779)
from
$197.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge.
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Cardone – Electric Throttle Body: Remanufactured (Part No.67-3005)
from
$281.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Product Features:
See More
Product Features:
- Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
- A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
- The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
- Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
- Each unit is guaranteed to function like the original.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96351-1)
from
$49.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10324-01)
from
$57.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
- It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
MAHLE Original – Intake Manifold Gasket Set (Part No.MS19605)
from
$56.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
ACDelco – GM Original Equipment Intake Manifold Gasket (Part No.A8040415737ACD)
from
$48.91
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.
Product Features:
See More
Product Features:
- Both upper and lower intake manifolds with matching gaskets sets available.
- Only ACDelco and GM offer complete later model GM coverage.
- Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)
from
$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)
from
$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Help – Intake Manifold Bolt (Part No.03426)
from
$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest – Electrical Connector (Part No.PT978)
from
$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Utilizing high grade materials to ensure peak conductivity and perfect connections
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Upgrade your 2005 Pontiac G6 with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2005 Pontiac G6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Air Intakes are key to keeping your G6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Air Intakes for the 2005 Pontiac G6, designed to meet your needs without breaking the bank.
From
Intake Manifold Part
replacements to
Throttle Body Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2005 Pontiac G6 at great prices.
Our Air Intakes inventory for this model
ranges from just $4.49 to $299.99, with
an average price of $116.89.
Our 8 Air Intakes in stock come from 7 trusted brands, so you’re sure to find the right part for your 2005 Pontiac G6 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Pontiac G6, we stock popular OEM and aftermarket Air Intakes from top names
like FELPRO, and more.
FELPRO Air Intakes
start at just $36.99 and boast an impressive 5 stars average rating from customers.
With 22 customer reviews and counting, our 2005 Pontiac G6 Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 Pontiac G6 is always ready to roll. We’re committed to providing you with everything you need to keep your G6 in top shape, all in one place.
Start shopping confidently below for your 2005 Pontiac G6!
Best-Selling Intake Manifold Parts for 2005 Pontiac G6s
Enhance the driving experience in your Pontiac with 4 quality Intake Manifold Part components, starting at $14.29.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98013 T)
from
$136.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)
from
$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Dorman – Help – Intake Manifold Bolt (Part No.03426)
from
$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mahle – Intake Manifold Gasket Set (Part No.A8043575202MAH)
from
$124.41
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
Most Popular 2005 Pontiac G6 Throttle Body Parts
Customize your Pontiac with 2 Throttle Body Parts products
like Throttle Bodies, all
priced under $299.99.
Hitachi – Throttle Chamber Assembly – New (Part No.ETB0028)
from
$299.99
Smaller, lighter and more accurate than ever, Hitachi’s electronic throttle bodies are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision TPS Circuitry maintains accurate engine mapping, optimally controlling engine torque according to operating conditions and engine combustion, resulting in optimal fuel economy and horsepower with the lowest possible emissions. Details such as internal gear sizes, teeth count and materials, as well as protected circuitry provide a durable and long life product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
Cardone New – New Fuel Injection Throttle Body (Part No.6E-3011)
from
$284.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Product Features:
See More
Product Features:
- Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
- Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
- 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
- Each unit is guaranteed to fit and function like the original.
Top Picks for 2005 Pontiac G6 Throttle Bodies & Carb Parts
Upgrade Pontiac G6s with top-quality Throttle Bodies & Carb Parts parts, including 2 OEM and aftermarket selections for your 2005 model.
Carquest – Electrical Connector (Part No.PT978)
from
$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Utilizing high grade materials to ensure peak conductivity and perfect connections
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)
from
$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Top-Rated Air Intakes Brands For Your 2005 Pontiac G6
Shop for the best-rated brands offering Air Intakes and other products for your 2005 Pontiac G6s. Below you’ll find some of our best rated Air Intakes from FELPRO, and more. Air Intakes from these brands that fit a 2005 G6 start at just $36.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2005 Pontiac G6 Air Intakes
When it comes to maintaining or upgrading your 2005 Pontiac G6, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2005 Pontiac G6. With over 2 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.99, with an average price of just $86.99. Plus, with over 11 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.99
$36.99
(10)
Engine Intake Manifold Bolt Set
“Exact replacement. Just take your time and recheck the torque cause the thread sealer on the threads can give you a false reading the first time you s”
from
$136.99
$136.99
(1)
Engine Intake Manifold Gasket Set
“Great product, included all the gaskets for job and reassembly”
FAQs for 2005 Pontiac G6 Air Intakes
Which Air Intakes are best-sellers for 2005 Pontiac G6s?
Out of 8 Air Intakes that fit 2005 Pontiac G6s, the following parts are the top sellers:
- Electrical Connector (10434059) – $32.99
- Intake Manifold Bolt (11694391) – $14.29
- Multi-Purpose O-Ring (11930831) – $4.49
What’s the price range for 2005 Pontiac G6 Air Intakes?
Air Intake prices for the 2005 Pontiac G6 start at $4.49 and go up to $299.99 for the most premium parts.
What’s the average price of a Air Intake for a 2005 Pontiac G6?
The average price for Air Intakes for the 2005 Pontiac G6 is $116.89. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Pontiac G6 model years?
What are the cheapest Air Intakes for my 2005 Pontiac G6?
The cheapest 2005 Pontiac G6 Air Intakes we carry in stock are:
- Multi-Purpose O-Ring (11930831) – $4.49
- Intake Manifold Bolt (11694391) – $14.29
- Electrical Connector (10434059) – $32.99
- Engine Intake Manifold Bolt Set (21021980) – $36.99
- Intake Manifold Gasket Set (11647826) – $124.41
What are the top-rated Air Intakes that fit the 2005 Pontiac G6?
Out of 22 reviews by customers, our 2005 Pontiac G6 Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2005 Pontiac G6 and their top-rated products:
- Intake Manifold Parts
- Engine Intake Manifold Gasket Set (15781024) – $136.99
- Engine Intake Manifold Bolt Set (21021980) – $36.99
What types of Air Intakes do you sell for my 2005 Pontiac G6?
As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 2005 Pontiac G6:
Can I get help with 2005 Pontiac G6 Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Air Intakes and more.
What is your return policy for Pontiac G6 Air Intakes?
Advance Auto Parts keeps returns simple. For new Pontiac G6 Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
