2005 Nissan Frontier Drivetrains
More 2005 Nissan Frontier Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 Nissan Frontier, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 Nissan Frontier Drivetrains
USA Standard Gear – Nissan Titan Spartan Locker Cross Pin Shaft (Part No.17027)
from
$59.99
Nissan Titan Spartan locker cross pin shaft.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Nissan Titan rear
- Works with Spartan Locker or standard open spider gears
SKF – Axle Seal (Part No.K4021161679SKF)
from
$45.86
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8473)
from
$95.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to NISSAN 86-04;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1986-2004
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- WITH BEARING
- CUSHION INSERT ONLY
- WITHOUT FRAME
Yukon Gear – Differential Crush S (Part No.55077)
from
$54.99
Differential Crush S
SKF – Driveshaft Support with Bearing (Part No.K1030153167SKF)
from
$207.39
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
Dorman – Rear Drive Shaft: Adjustable (Part No.946-635)
from
$1051.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Spicer – Universal Joint (Part No.25-3614X)
from
$27.99
Universal Joint
NOK – Transmission Case Shaft Seal (Part No.J5088157262NOK)
from
$12.71
Transmission Case Shaft Seal
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Rugged Ridge – Locking Hub (Part No.15001.61)
from
$357.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)
from
$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
- Includes axle bearing and seal
- Services one side
Yukon Gear – Replacement Pinion Flange For Dana 44, ’04-’07 Nissan Titan Rear (Part No.41188)
from
$334.99
Product Features:
See More
- Fits 2004-2007 Nissan Titan rear
- 29 spline
- Round companion flange
Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)
from
$1119.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Nissan Titan rear
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Carquest Premium – CV AXLE ASSY (Part No.NCV53133)
from
$151.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.High moly CV joint grease with stainless-steel boot bands
See More
Ohno – CV Joint Boot Kit (Part No.K6010151661OHN)
from
$26.94
The Ohno CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Dorman – 4WD Transfer Case Shift Motor (Part No.600-919)
from
$538.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new – this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Dura Grip Posi For ’04 & Up Nissan Titan Rear (Part No.26029)
from
$1180.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Nissan Titan rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Nut M18-1.0 Hex Size 27 mm (Part No.615-087.1)
from
$20.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MTC – Differential Drain P (Part No.J7058947963MTC)
from
$2.06
Differential Drain P
EMPI – Clamp – CV Boot (Part No.4I25091157EMP)
from
$2.46
Clamp – CV Boot
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Steel Cover For Nissan Titan M226 Rear (Part No.32334)
National – Bearings (Part No.32306-C)
from
$48.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 2005 Nissan Frontier Drivetrains Categories
2005 Nissan Frontier Drivetrains
You count on your 2005 Nissan Frontier to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 109 Drivetrains ranging in price from $2.06 to $1,180.00, you’re sure to find everything you need for your 2005 Nissan Frontier.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Moog, and Driveworks. 2005 Nissan Frontier Drivetrains start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,468 extensive product reviews on 2005 Nissan Frontier Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Nissan Frontier below to get started!
Top-Rated Drivetrains Brands For Your 2005 Nissan Frontier
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Nissan Frontier running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Motive Gear Drivetrains
You’ll find popular Motive Gear brand products across Differentials. All are waiting to get your 2005 Nissan Frontier back on the road. Some of the top-rated Motive Gear products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2005 Nissan Frontier, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2005 Nissan Frontier Drivetrains
What are the most purchased Drivetrains for the 2005 Nissan Frontier?
Out of 109 Drivetrains for the 2005 Nissan Frontier, the most popular in our inventory are:
What are the top-rated 2005 Nissan Frontier Drivetrains?
Top-rated Drivetrains for your 2005 Nissan Frontier based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
