from

$5.70

P/S Reservoir Gasket

from

$43.99

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$24.75

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$579.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$480.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$75.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$69.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$40.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Makes non-adjustable vehicle adjustable
Replaces original OE inner bolt on lower control arm
Adjustment Range: +/- .03 Degrees
Easy to install
Construction and design validated by MOOG engineers

from

$4.43

P/S Hose O-Ring

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.49

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$32.99

BALL JOINT 1 EA DRIVE

from

$50.99

R & P Bellows

from

$49.71

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$31.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$6.87

Steering Rack Mount

from

$344.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$363.53

Remanufactured Bosch power steering pumps designed for an optimum performance and direct replacement of the original equipment. Bosch range offers both electric and mechanical pumps. Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.

Product Features:

Designed to minimize power consumption
Seals, synthetic and plastic parts are replaced 100%
Capable to deliver high capacity pressures for all driving demands
Undergos extensive testing
Highly efficient design and manufacture from the OE know how

from

$203.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$245.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$247.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$141.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$173.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$39.02

Power Steering Reservoir

from

$32.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$25.99

Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Resistant to cracking and wear from heat cycles preventing fluid loss
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances