2005 Mercedes-Benz C230 Steering and Chassis Parts

Essential 2005 Mercedes-Benz C230 Steering and Chassis Parts

Cardone – Rack and Pinion Assembly (Part No.26-4084)

Rack and Pinion Assembly

from

$866.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

CRP – P/S Hose O-Ring (Part No.M2019375706CRP)

P/S Hose O-Ring

from

$4.43
P/S Hose O-Ring

MOOG – Caster/Camber Adjusting Kit (Part No.K100157)

Caster/Camber Adjusting Kit

from

$40.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Makes non-adjustable vehicle adjustable
  • Replaces original OE inner bolt on lower control arm
  • Adjustment Range: +/- .03 Degrees
  • Easy to install
  • Construction and design validated by MOOG engineers
See More

Rare Parts – R & P Bellows (Part No.RP57380)

R & P Bellows

from

$40.49
R & P Bellows

MOOG – Stabilizer Bar Link (Part No.K80491)

Stabilizer Bar Link

from

$60.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620729)

Suspension Control Arm and Ball Joint Assembly

from

$60.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Dorman – Suspension Control Arm (Part No.520-752)

Suspension Control Arm

from

$89.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Whiteline – Sway Bar Link (Part No.KLC140-295)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201543)

Stabilizer Bar Bushing Kit

from

$14.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Carquest Premium – Tie Rod End (Part No.300-75409)

Tie Rod End

from

$69.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Thread locking compound included.
See More

MOOG – Tie Rod End (Part No.ES80688)

Tie Rod End

from

$61.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)

Steering Rack Boot Clamp

from

$3.48
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BMR99)

Sway Bar 22Mm Heavy Duty

from

$214.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Sway Bar 24Mm X Heavy Duty Blade Adjustable (Part No.BMF97Z)

Sway Bar 24Mm X Heavy Duty Blade Adjustable

from

$203.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

APA/URO Parts – Steering Rack Bushing (Part No.M1063420057APA)

Steering Rack Bushing

from

$12.85
Steering Rack Bushing

Rein – Steering Rack Mounts (Part No.AVB0385)

Steering Rack Mounts

from

$8.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
See More

Febi – Sway Bar Bushing (Part No.L1050297155FEB)

Sway Bar Bushing

from

$6.10
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

APA/URO Parts – Sway Bar Bushing (Part No.L105073711APA)

Sway Bar Bushing

from

$3.05
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rein – Bushing (Part No.AVB0555)

Bushing

from

$17.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
See More

Cohline – Power Steering Return Line Assembly (Part No.M201676782COH)

Power Steering Return Line Assembly

from

$22.46
Since 1932, the Cohline group of companies has manufactured tube and hose line systems for the automotive sector, commercial vehicles, construction and agricultural machinery, motor industry, and other automobile suppliers.

Product Features:
  • Manufactured as a direct OE replacement
  • Pressure tested to maintain a consistent flow
  • Backed by the manufactures warranty against workmanship and material defects
See More

Carquest Premium – Molded Return Hose (Part No.40547)

Molded Return Hose

from

$151.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-719)

Power Steering Reservoir: Black, Plastic, Original Equipment Replacement

from

$32.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
  • Complete assembly – includes reservoir and reservoir cap
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

2005 Mercedes-Benz C230 Steering and Chassis Parts

You count on your 2005 Mercedes-Benz C230 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 69 Steering and Chassis Parts ranging in price from $3.48 to $976.21, you’re sure to find everything you need for your 2005 Mercedes-Benz C230.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Cardone, Moog, and Driveworks. 2005 Mercedes-Benz C230 Steering and Chassis Parts start as low as $3.48!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 73 extensive product reviews on 2005 Mercedes-Benz C230 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Sway Bar Link Kit with 5.0 stars and Control Arm Front Lower Right with 5.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2005 Mercedes-Benz C230 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2005 Mercedes-Benz C230

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Mercedes-Benz C230 running right for years to come. In our inventory you’ll find brands like Cardone, Moog, Driveworks, and even more.

Popular Dorman Steering and Chassis Parts

You’ll find popular Dorman brand products across Power Steering Parts and Ball Joints. All are waiting to get your 2005 Mercedes-Benz C230 back on the road. Some of the top-rated Dorman products in these categories are:
Suspension Control Arm
from $135.99
(1)
Suspension Control Arm
Lower Control Arm and Ball Joints
Suspension Control Arm
from $138.99
(1)
Suspension Control Arm
Lower Control Arm and Ball Joints

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2005 Mercedes-Benz C230, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Rack and Pinion Assembly
from $395.99
(2)
Rack and Pinion Assembly
Rack & Pinions
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters

FAQs for 2005 Mercedes-Benz C230 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2005 Mercedes-Benz C230?

Out of 69 Steering and Chassis Parts for the 2005 Mercedes-Benz C230, the most popular in our inventory are:
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters
Stabilizer Bar Link
from $39.99
(2)
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated 2005 Mercedes-Benz C230 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2005 Mercedes-Benz C230 based on customer reviews/ratings are:
Sway Bar Link Kit
from $32.99
(1)
Sway Bar Link Kit
“good”
Control Arm Front Lower Right
from $108.99
(1)
Control Arm Front Lower Right
“See below.”
Tie Rod End
from $61.99
(1)
Tie Rod End
“Part fit and well constructed.”