2005 Mazda Tribute Engine Cooling Parts

Essential 2005 Mazda Tribute Engine Cooling Parts

NTK – Engine Coolant Temperature Sensor (Part No.EF0159)

Engine Coolant Temperature Sensor

from

$57.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Dorman – Thermostat Housing (Part No.G40101225806DOR)

Thermostat Housing

from

$37.19
Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Direct replacement for a proper fit every time
  • Hoses slide on for easy installation
  • High-quality plastic or metal construction
  • Includes all hardware necessary for a complete repair (where applicable)
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10251)

Engine Coolant Reservoir Cap

from

$36.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1156)

Engine Water Pump: New, Gasket/Seals Included

from

$59.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85082)

Coolant Housing/Water Outlet: Gasket Included

from

$46.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% virgin resin material to insure durability
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

KAI – Cooling Fan Assembly (Part No.FO3115159)

Cooling Fan Assembly

from

$166.99
New Platinum Pro Radiator And Condenser Fan Assembly, 2.3 Liter L4 Engine

Product Features:
  • 2.3 Liter L4 Engine, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Felpro – Engine Water Pump Gasket (Part No.35663)

Engine Water Pump Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Dorman – Radiator Drain Petcocks (Part No.G1005831567DOR)

Radiator Drain Petcocks

from

$5.29
Dorman offers a variety of Radiator Drain Petcocks for a range of applications. The high-quality design ensures effective draining of the cooling system.

Product Features:
  • Available in several styles, including standard, screw-in, and push-in with captive thread
  • Direct replacement Radiator Drain Petcocks available (where applicable) to ensure a proper fit
  • Durably engineered for a long service life
  • Easy to use, no need to disconnect any of the radiator hoses
See More

KAI – Coolant Reservoir (Part No.FO3014107)

Coolant Reservoir

from

$45.99
New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:
  • With Cap, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Mahle – Water Pump Hsng Gask (Part No.G3031200746MAH)

Water Pump Hsng Gask

from

$5.23
Water Pump Hsng Gask

Felpro – THERMOSTAT GASKET (Part No.35776)

THERMOSTAT GASKET

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Thermostat Housing and Outlet Assembly (Part No.G4002419768DOR)

Thermostat Housing and Outlet Assembly

from

$66.59
Re-engineered to address common failure points in the original equipment, Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. This is more than a replacement; it’s an upgrade. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Fully assembled with thermostat, gaskets and hardware included
  • Hoses slide on for easy installation
  • Thermostat housing is constructed from high-quality plastic
  • Direct replacement for a proper fit every time
See More

Dorman – Engine Coolant Bypass Pipe (Part No.902-811)

Engine Coolant Bypass Pipe

from

$68.99
This engine coolant bypass pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine coolant bypass pipe is designed to match the fit and function of the original pipe on specified applications.
  • Restores functionality – reliable replacement for an original part that has failed due to heat, vibration or corrosion.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 192 Degrees (Part No.902-1106)

Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 192 Degrees

from

$66.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Ishino – Water Outlet Gasket (Part No.G3045315926ISH)

Water Outlet Gasket

from

$9.13
Water Outlet Gasket

Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)

Thermostat O-Ring

from

$4.76
Thermostat O-Ring

Motorcraft – Water Temperature Sensor (Part No.C6020457259MTR)

Water Temperature Sensor

from

$29.50
Motorcraft Water temperature sensors are designed for durability and electrical performance. Motorcraft digital Water temperature sensors are designed to work with Ford and Lincoln transmissions and engine control computers.

Product Features:
  • Sensors are tested according to Ford Motor Company noise, vibration and harshness (NVH) engineering standards
  • Recommended by Ford Motor Company
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431416)

Radiator: With Transmission Oil Cooler

from

$219.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – Engine Coolant Water Outlet (Part No.902-231)

Engine Coolant Water Outlet

from

$38.49
This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets
See More

Carquest Premium – Thermostat Kit: Gasket Included (Part No.85333)

Thermostat Kit: Gasket Included

from

$62.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Includes quality thermostat
See More

MAHLE Original – Engine Coolant Outlet Gasket (Part No.B31861)

Engine Coolant Outlet Gasket

from

$6.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – THERMOSTAT GASKET (Part No.35771)

THERMOSTAT GASKET

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Multi-Purpose O-Ring (Part No.35772)

Multi-Purpose O-Ring

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

2005 Mazda Tribute Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2005 Mazda Tribute. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 57 different Engine Cooling Parts in our inventory ranging from $1.99 to $270.09. That means you can find the exact parts or products you need to keep that 2005 Mazda Tribute running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Mazda Tribute. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2005 Mazda Tribute, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,201 reviews in this category, some of the top rated parts include Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2005 Mazda Tribute rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2005 Mazda Tribute Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Mazda Tribute demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Tribute the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 2005 Mazda Tribute Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2005 Mazda Tribute?

Out of 57 Engine Cooling Parts for the 2005 Mazda Tribute, the most popular in our inventory are:
Multi-Purpose O-Ring
from $9.99
(110)
Multi-Purpose O-Ring
Thermostat Housing O-Rings
Engine Water Pump: New, Gasket/Seals Included
from $56.99
(41)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
Standard Thermostat: 180 Degrees
from $10.99
(31)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 2005 Mazda Tribute Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2005 Mazda Tribute based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Electric Fan 16" Diameter
from $92.99
(34)
Electric Fan 16" Diameter
“Awesome”