2005 Mazda 3 Belts and Hoses

Essential Belts and Hoses for 2005 Mazda 3s

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.25" Diameter (Part No.C72879)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.25" Diameter

from

$159.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.9" Long, 1.13" Diameter (Part No.B72314)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.9" Long, 1.13" Diameter

from

$122.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.19" Diameter (Part No.B72098)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.19" Diameter

from

$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length (Part No.87866)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length

from

$28.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Mitsuboshi – Drive Belt (Part No.W1000367341MBL)

Drive Belt

from

$54.89
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100027192BAN)

Multi Rib (Serpentine) Belt

from

$28.14
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length (Part No.87823)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length

from

$36.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999420A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$197.99
This Litens supplied tensioner is manufactured to original equipment specifications. This tensioner boasts improvements to the OE design, enabling an efficient belt tensioner replacement process by a single technician. This part is specifically designed for Mazda applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999186A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$184.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada to meet Mazda’s specifications. The Litens replacement part maintains the heavy duty steel pulley, round spring technology and the specified internal damping components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Durable Steel Pulley for long service life and performance.
  • Professional Mechanics will change this tensioner in about 1 hour.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999630A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$195.99
This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part . As with the original equipment part, this replacement tensioner meets all performance and life specifications of the O.E. part. This part was designed for Mazda Applications and maintains the O.E. hydraulic strut technology. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic Strut Technology for maximum damping.
  • Durable Thermoplastic Pulley for long service life and performance.
  • Includes lift-lug feature for ease of installation.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
  • Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
  • Installation instructions included.
See More

Gates – PCV Hose (Part No.B21503117171GAT)

PCV Hose

from

$50.17
PCV Hose

Gates – Breather Hose (Part No.B20101064650GAT)

Breather Hose

from

$45.54
Breather Hose

Dorman – Help – PCV Hose Kit (Part No.46034)

PCV Hose Kit

from

$34.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:
  • Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models.
  • Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves (Part No.89015)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves

from

$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.31" Diameter (Part No.B72102)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.31" Diameter

from

$60.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter (Part No.E72900)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter

from

$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.5" Long, 1.25" Diameter (Part No.E72880)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.5" Long, 1.25" Diameter

from

$51.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S259020-001)

Shock Kit

from

$56.99
Shock Kit

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.28" Diameter (Part No.E72563)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.28" Diameter

from

$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Stretch Serpentine Belt; 32.05 Long, 3 Rib Count, Zip Tie Required (Part No.3PK814EE)

Stretch Serpentine Belt; 32.05 Long, 3 Rib Count, Zip Tie Required

from

$25.99
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Dayco – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.5060900)

Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count

from

$41.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Stretch Serpentine Belt; 28.03 Long, 5 Rib Count, Zip Tie Required (Part No.5PK712EE)

Stretch Serpentine Belt; 28.03 Long, 5 Rib Count, Zip Tie Required

from

$22.99
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (Part No.380K6)

Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count

from

$14.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 91 Long, 6 Rib Count (Part No.910K6)

Poly Rib Belt Serpentine Belt; 91 Long, 6 Rib Count

from

$39.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Upgrade your 2005 Mazda 3 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2005 Mazda 3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Belts and Hoses are key to keeping your 3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Belts and Hoses for the 2005 Mazda 3, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2005 Mazda 3 at great prices. Our Belts and Hoses inventory for this model ranges from just $12.99 to $184.99, with an average price of $53.36. Our 36 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2005 Mazda 3 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Mazda 3, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Dorman, Driveworks, and more. Dayco Belts and Hoses start at just $12.99 and boast an impressive 5 stars average rating from customers. Dorman and Driveworks also bring quality to the table, with Belts and Hoses available starting at $14.29, and at an average 4 stars rating. With 360 customer reviews and counting, our 2005 Mazda 3 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Mazda 3 is always ready to roll. We’re committed to providing you with everything you need to keep your 3 in top shape, all in one place. Start shopping confidently below for your 2005 Mazda 3!

Best-Selling Serpentine and V Belts for 2005 Mazda 3s

Enhance the driving experience in your Mazda with 16 quality Serpentine and V Belt components, starting at $14.29.

Dayco – Stretch Serpentine Belt: 26.5 "Long, 5 Rib Count, Engineered For High Mileage (Part No.E050265)

Stretch Serpentine Belt: 26.5 "Long, 5 Rib Count, Engineered For High Mileage

from

$26.99
Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:
  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
See More

Dayco – Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count (Part No.5060520)

Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count

from

$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves (Part No.89015)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves

from

$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Poly Rib Belt Serpentine Belt; 51.5 Long, 6 Rib Count (Part No.5060515)

Poly Rib Belt Serpentine Belt; 51.5 Long, 6 Rib Count

from

$34.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count (Part No.520K6)

Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count

from

$18.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Stretch Serpentine Belt; 27.17 Long, 5 Rib Count, Zip Tie Required (Part No.5PK690EE)

Stretch Serpentine Belt; 27.17 Long, 5 Rib Count, Zip Tie Required

from

$27.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning.
  • Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
  • Elasticityáallows for long-lasting performance and proper tension
See More

Driveworks – Poly Rib Belt Serpentine Belt; 51.5 Long, 6 Rib Count (Part No.515K6)

Poly Rib Belt Serpentine Belt; 51.5 Long, 6 Rib Count

from

$14.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber.
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100027192BAN)

Multi Rib (Serpentine) Belt

from

$28.14
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K050264SF)

Stretch Fit« Micro-V« Serpentine Drive Belt

from

$32.99
Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:
  • Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000140828CON)

Multi Rib (Serpentine) Belt

from

$29.77
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000390095MBL)

Multi-Rib (Serpentine) Belt

from

$51.47
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Dayco – Dayco, Drive Belt (Part No.W10001221546DAY)

Dayco, Drive Belt

from

$33.97
Dayco, Drive Belt

Bando – Drive Belt (Part No.W10002440850BAN)

Drive Belt

from

$28.90
Drive Belt

Gates – V-Ribbed Serpentine Belt: 52" Long, 6 Rib Count, Exact Fit (Part No.K060514)

V-Ribbed Serpentine Belt: 52" Long, 6 Rib Count, Exact Fit

from

$27.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Meets or exceeds all specifications from the Original Equipment Manufacturer.
  • Designed for small diameter pulleys, backside idlers, and for use with (or without) automatic tensioners.
  • Special belt constructions eliminate belt noise, reduce tension loss, and solve problem drive applications.
  • Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat resistant EPDM materials.
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Dayco, Drive Belt, 6PK-1310 (Part No.W1000655118DAY)

Dayco, Drive Belt, 6PK-1310

from

$27.28
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Hutchinson – Stretch Poly Rib Serpentine Belt (Part No.W1000467496HUT)

Stretch Poly Rib Serpentine Belt

from

$22.29
Hutchinson stretch belts, are specifically designed for 2 to 4 point drives that do not require tensioning. Although these belts may look like standard poly rib belts, they are very different. These specially designed belts have self-tensioning capabilities required by specific original equipment (OE) drives designed for a “stretch” belt. Vehicles that are manufactured with “stretch” belts must replace those belts with “stretch” belts. These belts are not interchangeable with standard constructed belts of the same size. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. “Stretch” belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve. Dismounting and reusing stretch belts is not recommended. A new belt should be installed anytime one is removed.

Product Features:
  • Wear resistant EPDM rib material
  • Highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord
  • Designed to elongate over the fixed pulley system
  • Provides the proper tension maintenance
See More

Most Popular 2005 Mazda 3 Radiator Hoses

Customize your Mazda with 6 Radiator Hoses products like Coolant Hoses and By-Pass Hoses, all priced under $153.27.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.19" Diameter (Part No.B72098)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.19" Diameter

from

$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length (Part No.87866)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length

from

$28.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Radiator Hose (Part No.G20001065742GAT)

Radiator Hose

from

$153.27
Radiator Hose

Gates – Bypass Hose (Part No.G2020245026GAT)

Bypass Hose

from

$51.43
Bypass Hose

MacKay – MacKay Radiator Hose (Part No.G2000457709MKY)

MacKay Radiator Hose

from

$21.34
MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:
  • Excellent resistance to high temperatures
  • Resists chemical attack (oils, fuels etc.)
  • Excellent Ozone resistance
  • Good resistance to abrasion
  • High resistance to vibration
See More

Dayco – Dayco, Bypass Hose, Trim-to-Fit (Part No.G20201220430DAY)

Dayco, Bypass Hose, Trim-to-Fit

from

$18.11
Dayco, Bypass Hose, Trim-to-Fit

Top Picks for 2005 Mazda 3 Engine Cooling Hoses

Upgrade Mazda 3s with top-quality Engine Cooling Hoses parts, including 4 OEM and aftermarket selections for your 2005 model.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.5" Long, 1.22" Diameter (Part No.E72313)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.5" Long, 1.22" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.9" Long, 1.13" Diameter (Part No.B72314)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.9" Long, 1.13" Diameter

from

$122.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S259020-001)

Shock Kit

from

$56.99
Shock Kit

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.25" Diameter (Part No.C72879)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.25" Diameter

from

$159.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

In-Demand Belt Tensioners for 2005 Mazda 3s

Select from 1 premium Belt Tensioners parts for your 2005 Mazda 3.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999186A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$184.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada to meet Mazda’s specifications. The Litens replacement part maintains the heavy duty steel pulley, round spring technology and the specified internal damping components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Durable Steel Pulley for long service life and performance.
  • Professional Mechanics will change this tensioner in about 1 hour.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Most Sold 2005 Mazda 3 Heater Hoses

Explore our best-selling Mazda parts for the 2005 3 among 5 OEM and aftermarket options starting from $12.99.

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length (Part No.80414)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length

from

$12.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length (Part No.87823)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 16 Inch Length

from

$36.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 Inch Length (Part No.88436)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 Inch Length

from

$25.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Heater Hose (Part No.R3030325381GAT)

Heater Hose

from

$130.87
Heater Hose

Gates – Heater Hose (Part No.R3030303844GAT)

Heater Hose

from

$51.49
Heater Hose

Top-Rated Belts and Hoses Brands For Your 2005 Mazda 3

Shop for the best-rated brands offering Belts and Hoses and other products for your 2005 Mazda 3s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Dorman, and Driveworks, and more. Belts and Hoses from these brands that fit a 2005 3 start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2005 Mazda 3 Belts and Hoses

When it comes to maintaining or upgrading your 2005 Mazda 3, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2005 Mazda 3. With over 16 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $42.23. Plus, with over 125 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Stretch Serpentine Belt; 27.17 Long, 5 Rib Count, Zip Tie Required
from
$27.49
This product is not rated

Stretch Serpentine Belt; 27.17 Long, 5 Rib Count, Zip Tie Required

“”

Popular Dorman 2005 Mazda 3 Belts and Hoses

Dorman auto parts is one of the highest quality Belts and Hose brands in the market. Any 2005 Mazda 3 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2005 3, Advance Auto Parts carries a full inventory of 1 Dorman Belts and Hoses. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Dorman Belts and Hoses range up to $34.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

PCV Hose Kit
from
$34.99

(2)

PCV Hose Kit

“Good”

FAQs for 2005 Mazda 3 Belts and Hoses

Which Belts and Hoses are best-sellers for 2005 Mazda 3s?

Out of 36 Belts and Hoses that fit 2005 Mazda 3s, the following parts are the top sellers:

What’s the price range for 2005 Mazda 3 Belts and Hoses?

Belts and Hose prices for the 2005 Mazda 3 start at $12.99 and go up to $184.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2005 Mazda 3?

The average price for Belts and Hoses for the 2005 Mazda 3 is $53.36. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mazda 3 model years?

Yes, we currently carry Belts and Hoses for 14 model years of Mazda 3s between 2004 and 2020. Belts and Hoses are bought most frequently for the following model years: 2020, 2019, 2016, 2015, 2014, 2013, 2012, 2011, and 2010.

What are the cheapest Belts and Hoses for my 2005 Mazda 3?

What are the top-rated Belts and Hoses that fit the 2005 Mazda 3?

Out of 360 reviews by customers, our 2005 Mazda 3 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2005 Mazda 3 and their top-rated products:

What types of Belts and Hoses do you sell for my 2005 Mazda 3?

Can I get help with 2005 Mazda 3 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Belts and Hoses and more.

What is your return policy for Mazda 3 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mazda 3 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.