2005 Lincoln Navigator Fuel and Emissions Systems
More 2005 Lincoln Navigator Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2005 Lincoln Navigator, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2005 Lincoln Navigator Fuel and Emissions Systems
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61042)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Motorcraft – Motorcraft PCV Hose (Part No.B2150671587MTR)
from
$63.53
The Motorcraft PCV Hose is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- OES replacement part for your vehicle’s original factory component
- Offering the quality, reliability, and durability of OES
- Manufactured to OES specification for fit, form, and function
Motorcraft – Fuel Pressure Sensor (Part No.C3001671908MTR)
from
$114.17
Fuel Pressure Sensor
Carquest Premium – Fuel Cap: 10832, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10832)
from
$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Spectra Premium – Fuel Filler Neck (Part No.FN813)
from
$106.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Fuel Pressure Sensor (Part No.FPA1085)
from
$133.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – Engine Intake Manifold Actuator (Part No.RAE6001)
from
$127.99
Engine Intake Manifold Actuator
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1131)
from
$59.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
NTK – Air Charge Temperature Sensor (Part No.EF0016)
from
$30.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-796)
from
$10.49
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Available for most Ford Lincoln and Mercury vehicle applications.
- Specifically designed for each application for optimum performance and easy installation.
- Designed to meet precise Ford O.E. engineering standards for fit, functionality and durability.
- High-strength materials used for long, trouble-free service life.
- Ford O-Rings provide effective sealing against water, oil, gases, chemicals and harmful contaminants.
- Engineered to maintain reliable sealing under harsh conditions, including temperature and pressure extremes.
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73119-1)
from
$111.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Motorcraft – REGULATOR-WINDW (Part No.WPT-359)
from
$63.99
REGULATOR-WINDW
Carquest Premium – Ambient Air Temperature Sensor Connector (Part No.PTC2689)
from
$58.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1116)
from
$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – 4WD Actuator (Part No.EGA1274)
from
$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorcraft – Wire Assembly (Part No.WPT-322)
from
$69.99
Wire Assembly
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE1354)
from
$89.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Series 7000 Fuel Module (Part No.E3001418421DEL)
from
$290.70
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.
Product Features:
See More
Product Features:
- Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
- Single stage turbine pump provides quiet, energy efficient operation
- Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
- Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
- High capacity filter media helps supply clean fuel to the injection system
- Available serviceable in-tank fuel filter for markets with poor quality fuels
ACDelco – Fuel Pump Relay (Part No.P2037620205ACD)
from
$36.27
Fuel Pump Relay
Walker Products – Air Charge Temperature Sensor (Part No.C6000175481WKR)
from
$23.46
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Motorcraft – O2 Sensor (Part No.DY-1184)
from
$129.99
O2 Sensor
Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)
from
$38.99
This fuel pump driver module connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2122)
from
$54.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Idle Air Control Valve (Part No.ACA1028)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Mahle – Fuel Injector O-Ring (Part No.C10132590067MAH)
from
$8.61
Fuel Injector O-Ring
Bosch – Oxygen Sensor (Part No.C5010165002BOS)
from
$59.36
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
Motorcraft – Motorcraft EGR Pressure Sensor (Part No.B7006175517MTR)
from
$116.50
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure optimal performance and durability
- Designed for long service life under harsh conditions in under-hood environment
- Works with other vehicle emission sensors to deliver optimal fuel efficiency and emissions
- Adherence to OE specs helps minimize repeat repairs and false Check Engine warnings
- Design includes OE innovations and upgrades
- 100 percent coverage of Ford and Lincoln vehicles
Popular 2005 Lincoln Navigator Fuel and Emissions Systems Categories
2005 Lincoln Navigator Fuel and Emissions Systems
You count on your 2005 Lincoln Navigator to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 80 Fuel and Emissions Systems ranging in price from $3.49 to $434.14, you’re sure to find everything you need for your 2005 Lincoln Navigator.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Bosch, Felpro, and Motorcraft. 2005 Lincoln Navigator Fuel and Emissions Systems start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 672 extensive product reviews on 2005 Lincoln Navigator Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit with 4.7 stars and Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2005 Lincoln Navigator below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2005 Lincoln Navigator
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Lincoln Navigator running right for years to come. In our inventory you’ll find brands like Bosch, Felpro, Motorcraft, and even more.
Popular Dorman Fuel and Emissions Systems
You’ll find popular Dorman brand products across Fuel Lines and Fuel Pumps. All are waiting to get your 2005 Lincoln Navigator back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
If Bosch are what you’re looking for, our inventory holds plenty. We stock Bosch brand Fuel and Emissions Systems for your 2005 Lincoln Navigator, and some of our most reviewed Bosch parts include:
FAQs for 2005 Lincoln Navigator Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2005 Lincoln Navigator?
Out of 80 Fuel and Emissions Systems for the 2005 Lincoln Navigator, the most popular in our inventory are:
What are the top-rated 2005 Lincoln Navigator Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2005 Lincoln Navigator based on customer reviews/ratings are:
from
$32.99
(32)
Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“I had purchased a less expensive MotoRad cap and still had the fuel cap warning light on my dashboard. This is a much better quality cap and heavier ”
from
$21.99
(25)
Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost the fuel cap to my RV camper and needed something quick to replace it. With a Ford F450 Chasis this size fuel cap was the perfect fit.”
