2005 Lincoln Aviator Drivetrains

Essential 2005 Lincoln Aviator Drivetrains

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)

Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline

from

$299.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline Trac Loc positraction
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

SKF – Diff. Bearing Shaft (Part No.J7005197065SKF)

Diff. Bearing Shaft

from

$14.46
Diff. Bearing Shaft

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Pinion Install Kit For Ford 8.8" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)

Carrier Installation Kit For Dana 30 Differential

from

$99.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 30
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

from

$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
  • 1310 and 1330 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" In A 4.30 Ratio (Part No.24353)

High Performance Ring & Pinion Gear Set For Ford 8.8" In A 4.30 Ratio

from

$459.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Ford 8.8″
  • 8.80″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 4.30 ratio
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25"

from

$17.99
Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

Product Features:
  • Pinion depth shims for AMC Model 35 and Chrysler 7.25″
See More

USA Standard Gear – Master Overhaul Kit for ’09 & Down Ford 8.8" Differential. (Part No.37030)

Master Overhaul Kit for '09 & Down Ford 8.8" Differential.

from

$201.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Yoke For Model 35 With A 1310 U/Joint Size (Part No.41098)

Yoke For Model 35 With A 1310 U/Joint Size

from

$115.99
Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits AMC Model 35
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

1330 Dual-Size Cap U/Joint

from

$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Taper Bearing Cup

from

$6.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

SKF – Diff. Side Cover Sea (Part No.J7041325694SKF)

Diff. Side Cover Sea

from

$19.60
Diff. Side Cover Sea

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Yukon Gear – Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline (Part No.20070)

Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline

from

$404.99
Product Features:
  • Standard open carrier case and spiders
  • Fits Ford 8.8″ with 31 spline axles
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182734EMP)

RE CV Joint Boot Kit

from

$28.96
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Trao Loc Spring For Ford 8.8", 31 Spline

from

$99.99
Product Features:
  • Trac Loc spring for Ford 8.8″
  • 31 spline applications only
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

EVO Driveline – Transfer Case Assembly (Part No.UMT429-4)

Transfer Case Assembly

from

$1681.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Zip Locker Bulkhead Fitting Kit

from

$36.99
Product Features:
  • Bulkhead fitting kit
  • Includes bulkhead fitting, outer fitting and o-ring
See More

Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)

Chrome Cover For 8.8" Ford

from

$74.99
Chrome cover for 8.8″ Ford.

Product Features:
  • Fits Ford 8.8″
  • Chrome
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.521000)

Hub and Bearing Assembly

from

$169.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)

8.8" Ford Cover Gasket

from

$12.99
8.8″ Ford cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 8.8″
See More

Popular 2005 Lincoln Aviator Drivetrains Categories

2005 Lincoln Aviator Drivetrains

You count on your 2005 Lincoln Aviator to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 266 Drivetrains ranging in price from $0.99 to $1,681.99, you’re sure to find everything you need for your 2005 Lincoln Aviator.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 24 different brands like Moog, Valvoline, and Driveworks. 2005 Lincoln Aviator Drivetrains start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,259 extensive product reviews on 2005 Lincoln Aviator Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Lincoln Aviator below to get started!

Top-Rated Drivetrains Brands For Your 2005 Lincoln Aviator

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Lincoln Aviator running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

Popular Spicer Drivetrains

You’ll find popular Spicer brand products across Universal Joints. All are waiting to get your 2005 Lincoln Aviator back on the road. Some of the top-rated Spicer products in these categories are:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints
Universal Joint
from $39.99
(5)
Universal Joint
U-Joints
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2005 Lincoln Aviator Drivetrains

What are the most purchased Drivetrains for the 2005 Lincoln Aviator?

Out of 266 Drivetrains for the 2005 Lincoln Aviator, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 2005 Lincoln Aviator Drivetrains?

Top-rated Drivetrains for your 2005 Lincoln Aviator based on customer reviews/ratings are:
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Greaseable Super Strength Universal Joint
from $36.99
(35)
Greaseable Super Strength Universal Joint
“Good ujoint”