2005 Kia Rio Cooling and Climate Controls
Find Your Specific 2005 Kia Rio Cooling and Climate Controls
Below you will find various in-demand Kia Cooling and Climate Controls, components and accessories for your 2005 Rio. Advance Auto Parts has popular Rio parts like Blower Motor and Related Products, Engine Cooling Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Rio model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2005 Kia Rio Cooling and Climate Controls below and start saving instantly.
Popular 2005 Kia Rio Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2005 Kia Rios
MANDO – New ABS Wheel Speed Sensor, Direct Replacement (Part No.25N5007)
from
$29.99
One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando ABS Sensors are not only designed to help clear that trouble code, but more importantly give you peace of mind knowing that your ABS system can once again function precisely as designed by factory. HL Mando ABS (Anti-Lock Brake System) Sensor is high-quality aftermarket replacement, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!
See More
Carquest Premium – Multi-Use Connector (Part No.PTC1099)
from
$54.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Imperial – Electric Fan, 12" Diameter (Part No.226112)
from
$108.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 12 in. universal fit reversible fan
- 800 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185 Deg. F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Carquest Premium – A/C Suction and Liquid Line Hose Assembly without Orifice Tube (Part No.T55734)
from
$100.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – Multi-Purpose Relay, 30 Amp (Part No.RAA1238)
from
$18.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – A/C New, with Clutch, with HS15 Compressor (Part No.T68123)
from
$319.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Dorman – A/C Condenser Fan Assembly: Cost Effective and Reliable (Part No.621-144)
from
$108.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
- Complete package – assembly is designed with the same materials and components as the original part
- Quality assured – components are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1306)
from
$39.99
Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured with high quality materials, industry-leading electronic components and strict quality controls
- Extensive design validation testing and 100% end-of-line tested
- Gaskets or seals are included if required
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55806)
from
$62.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – Heater Core (Part No.910604)
from
$100.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Factory Air – System Mounted Pressure Transducer (Part No.37324)
from
$118.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Vehicle specific applications
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA3501)
from
$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each part meets manufacturing specifications before packaging.
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (Part No.54018)
from
$8.49
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26800)
from
$27.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$21.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)
from
$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – HVAC Blower Control Switch (Part No.SBA1183)
from
$32.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Panel Switch provides intuitive control over the vehicle’s heating, ventilation, and air conditioning systems, enhancing comfort for passengers by allowing easy adjustments to temperature and airflow according to individual preferences. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
Felpro – Engine Coolant Outlet Gasket (Part No.35251)
from
$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55800)
from
$57.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39123)
from
$51.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest – A/C Auto Temperature Control Relay (Part No.R3154)
from
$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.
Product Features:
See More
Product Features:
- Points meet or exceed the original for OE plus performance.
- Featuring brass or copper contacts where specified for extended wear
- All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432432)
from
$179.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Imperial – Electric Fan, 10" Diameter (Part No.226110)
from
$72.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 10 in. universal fit reversible fan
- 650 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64043)
from
$95.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Dorman – Help – Radiator Cap (Part No.54237)
from
$22.99
This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2252)
from
$86.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Blower Motor: with Wheel (Part No.35079)
from
$113.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Upgrade your 2005 Kia Rio with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2005 Kia Rio, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Kia or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Rio functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Cooling and Climate Controls for the 2005 Kia Rio, designed to meet your needs without breaking the bank.
From
Blower Motor and Related Product
replacements to
Engine Cooling Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2005 Kia Rio at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $4.99 to $319.99, with
an average price of $67.43.
Our 42 Cooling and Climate Controls in stock come from 9 trusted brands, so you’re sure to find the right part for your 2005 Kia Rio without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Kia Rio, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like FELPRO, Carquest Premium, Imperial, and more.
FELPRO Cooling and Climate Controls
start at just $4.99 and boast an impressive 4.6 stars average rating from customers.
Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $10.49, and at an average 4.4 stars rating.
With 880 customer reviews and counting, our 2005 Kia Rio Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 Kia Rio is always ready to roll. We’re committed to providing you with everything you need to keep your Rio in top shape, all in one place.
Start shopping confidently below for your 2005 Kia Rio!
Best-Selling Blower Motor and Related Products for 2005 Kia Rios
Enhance the driving experience in your Kia with 5 quality Blower Motor and Related Product components, starting at $15.05.
Carquest – A/C Auto Temperature Control Relay (Part No.R3154)
from
$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.
Product Features:
See More
Product Features:
- Points meet or exceed the original for OE plus performance.
- Featuring brass or copper contacts where specified for extended wear
- All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Blower Motor: with Wheel (Part No.35079)
from
$113.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1156)
from
$59.99
Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured with high quality materials, industry-leading electronic components and strict quality controls
- Extensive design validation testing and 100% end-of-line tested
- Gaskets or seals are included if required
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Dorman – HVAC Blower Motor Resistor (Part No.973-086)
from
$41.99
Product Features:
See More
- Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance – fixes a fan that’s only operating on one speed or not working at all
- Thoroughly tested – examined and validated to perform safely and effectively
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Carquest Premium – HVAC Blower Control Switch (Part No.SBA1183)
from
$32.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Panel Switch provides intuitive control over the vehicle’s heating, ventilation, and air conditioning systems, enhancing comfort for passengers by allowing easy adjustments to temperature and airflow according to individual preferences. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
Most Popular 2005 Kia Rio Engine Cooling Parts
Customize your Kia with 18 Engine Cooling Parts products
like Thermostats,
Radiators, and
Water Pumps, all
priced under $164.99.
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$23.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248 Deg. F
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13868)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Felpro – Engine Coolant Outlet Gasket (Part No.35251)
from
$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)
from
$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13869)
from
$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)
from
$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Imperial – Electric Fan, 12" Diameter (Part No.226112)
from
$108.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 12 in. universal fit reversible fan
- 800 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$65.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan, 10" Diameter (Part No.226110)
from
$72.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 10 in. universal fit reversible fan
- 650 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185 Deg. F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$69.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160 Deg. F – 210 Deg. F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Motorad UltraStats – UltraStat Thermostat: 180 Degrees (Part No.5240-180)
from
$14.99
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Motorad UltraStats – UltraStat Thermostat: 192 Degrees (Part No.5240-192)
from
$13.99
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432678)
from
$164.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2252)
from
$86.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
KAI – Radiator (Part No.RAD2701)
from
$146.99
New Platinum Pro Radiator, 1.6 Liter 4 Cylinder Engine, Automatic Or Manual Transmission Sedans, 1 Row Core
Product Features:
See More
Product Features:
- 1.6 Liter 4 Cylinder Engine, Automatic Or Manual Transmission Sedans, 1 Row Core, Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Radiator Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$99.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Dorman – Help – Radiator Cap (Part No.54237)
from
$22.99
This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 2005 Kia Rio Heating Parts
Upgrade Kia Rios with top-quality Heating Parts parts, including 2 OEM and aftermarket selections for your 2005 model.
Factory Air – System Mounted Pressure Transducer (Part No.37324)
from
$118.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Vehicle specific applications
Carquest Premium – Heater Core (Part No.910549)
from
$65.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
In-Demand Air Conditioning Parts for 2005 Kia Rios
Select from 17 premium Air Conditioning Parts parts for your 2005 Kia Rio, with prices ranging from $18.99 to $319.99.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$21.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – Multi-Purpose Relay, 30 Amp (Part No.RAA1238)
from
$18.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – Multi-Use Connector (Part No.PTC1099)
from
$54.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26800)
from
$27.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Carquest Premium – A/C New, with Clutch, with HS15 Compressor (Part No.T68123)
from
$319.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6523)
from
$170.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Dorman – A/C Condenser Fan Assembly: Cost Effective and Reliable (Part No.621-144)
from
$108.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
- Complete package – assembly is designed with the same materials and components as the original part
- Quality assured – components are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54951)
from
$107.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2914)
from
$104.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – A/C Suction and Liquid Line Hose Assembly without Orifice Tube (Part No.T55734)
from
$100.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55802)
from
$82.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55800)
from
$57.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
- Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
- Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related A/C components.
- Welds and crimps meet and exceed original equipment tension specifications.
- Manufactured to allow flexibility in the hose to conform to engine compartments.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39123)
from
$51.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1746)
from
$42.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1495)
from
$32.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
MANDO – New ABS Wheel Speed Sensor, Direct Replacement (Part No.25N5123)
from
$29.99
One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando ABS Sensors are not only designed to help clear that trouble code, but more importantly give you peace of mind knowing that your ABS system can once again function precisely as designed by factory. HL Mando ABS (Anti-Lock Brake System) Sensor is high-quality aftermarket replacement, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!
See More
MANDO – New ABS Wheel Speed Sensor, Direct Replacement (Part No.25N5124)
from
$24.99
One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando ABS Sensors are not only designed to help clear that trouble code, but more importantly give you peace of mind knowing that your ABS system can once again function precisely as designed by factory. HL Mando ABS (Anti-Lock Brake System) Sensor is high-quality aftermarket replacement, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!
See More
Top-Rated Cooling and Climate Controls Brands For Your 2005 Kia Rio
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2005 Kia Rios. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 2005 Rio start at just $4.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2005 Kia Rio Cooling and Climate Controls
When it comes to maintaining or upgrading your 2005 Kia Rio, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2005 Kia Rio. With over 1 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99. Plus, with over 15 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 2005 Kia Rio Cooling and Climate Controls
Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2005 Kia Rio owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2005 Rio, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Kia in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $10.49 to $14.99, plus, with more than 210 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
from
$10.99
(10)
Standard Thermostat: 192 Degrees
“This thermostat looks different than the OEM one but installed it and it works just fine.”
from
$10.49
(7)
Standard Thermostat: 180 Degrees
“This 180 degree thermostat works fine. It does work with my 2001 Mazada Protege LX, however the OEM thermostat is a 195 degrees. So my car runs a litt”
FAQs for 2005 Kia Rio Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2005 Kia Rios?
Out of 42 Cooling and Climate Controls that fit 2005 Kia Rios, the following parts are the top sellers:
- Cap & Valve A/C System Seal Kit (15890310) – $21.99
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Electric Fan, 12" Diameter (6016901) – $108.99
What’s the price range for 2005 Kia Rio Cooling and Climate Controls?
Cooling and Climate Control prices for the 2005 Kia Rio start at $4.99 and go up to $319.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2005 Kia Rio?
The average price for Cooling and Climate Controls for the 2005 Kia Rio is $67.43. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Kia Rio model years?
What are the cheapest Cooling and Climate Controls for my 2005 Kia Rio?
The cheapest 2005 Kia Rio Cooling and Climate Controls we carry in stock are:
- Engine Coolant Outlet Gasket (5180066) – $4.99
- Standard Thermostat: 180 Degrees (5653363) – $10.49
- Standard Thermostat: 192 Degrees (5653371) – $10.99
- UltraStat Thermostat: 192 Degrees (11920547) – $13.99
- Radiator Cap: 16 PSI (17110021) – $14.99
What are the top-rated Cooling and Climate Controls that fit the 2005 Kia Rio?
Out of 880 reviews by customers, our 2005 Kia Rio Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2005 Kia Rio and their top-rated products:
- Blower Motor and Related Products
- A/C Auto Temperature Control Relay (19970030) – $15.05
- Blower Motor: with Wheel (15010056) – $113.99
- Engine Cooling Parts
- A/C Auto Temperature Control Relay (19970030) – $15.05
- Blower Motor: with Wheel (15010056) – $113.99
- Air Conditioning Parts
- A/C Auto Temperature Control Relay (19970030) – $15.05
- Blower Motor: with Wheel (15010056) – $113.99
What types of Cooling and Climate Controls do you sell for my 2005 Kia Rio?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2005 Kia Rio:
Can I get help with 2005 Kia Rio Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Kia Cooling and Climate Controls and more.
What is your return policy for Kia Rio Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Kia Rio Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
